- Shop
- Blog
- Contact
- My Account
£12.35 GBP
Miniart 1:35 - German Grenades & Mines Set - Plastic Model Kit #35258
This kit includes German grenades and mines with ammo boxes and Molotov cocktails in a wooden box.
The kit contains 125 parts:
- 113 plastic parts
- 40 clear parts
- 12 PE parts
Decal sheet included.
Box: 260mm x 162mm x 35mm
£44.00 GBP
Miniart 1:35 - Stug. III 0-Series - Plastic Model Kit #35210
The German Sturmgeschütz III or StuG III assault gun was the country's 2nd most produced AFV of the WWII period (after the Sd Kfz 251). The StuG was designed to support the advancing infantry using direct fire. Early models were equipped with low-velocity 7.5 cm StuK 37 L/24 guns which were able to blast fortifications but could not penetrate armour well. After the Germans encountered the Soviet KV-1 and T-34 tanks those were substituted with high-velocity 7.5 cm StuK 40 L/43 and later 7.5 cm StuK 40 L/48.
Before the production began, five prototypes of the vehicle were produced in 1937 - the experimental '0' series. They used the chassis and running gear of the Panzer III and featured a mild-steel superstructure and Krupp’s 7.5cm StuK 37 L/24 cannon. These AFVs were tested at a number of training facilities and remained in use as training vehicles until 1942.
Box: 386mm x 240mm x 60mm
Additional:
- Highly detailed model
- Clear parts included
- PE parts included
- Workable tracks included
- Accurate gun 7.5cm StuK 37 L/24
- All hatches can be positioned open or closed
- Decal sheet for 3 variants
Download instructions for this kit here
£30.00 GBP
HobbyBoss 1:35 - German Sd.Kfz.182 King Tiger Porsche Turret w/ Zimmerit - Plastic model kit #84530
Development of the Tiger II heavy tank started in 1937 with design contracts given to Henschel and Porsche. Both companies used the same turret in their prototypes (designed by Krupp) but the tanks had differences in the hull, transmission and suspension systems. The Porsche design featured a rear-mounted turret and a mid-mounted engine, and the suspension was the same as on the Elefant. The Henschel version which was more conventional won the contract and all King Tigers were produced by the company.
Production vehicles used two turret designs. The initial turret had a rounded front, sloped sides and a curved bulge on the left side for commander's cupola which proved to be difficult to manufacture. This turret is often called 'Porsche turret' as opposed to the more common 'production turret' or 'Henschel turret'. Fifty King Tigers had received the early 'Porsche turret' before the design was simplified.
The production of King Tigers was disrupted by the Allied bombings with five raids in September and October 1944 alone destroying 95% of the floor area at the Henschel plant. Initially orders were placed for 1,500 King Tigers but only 492 units were produced until the end of the war.
Item No: 84530
Item Name: German Sd.Kfz.182 King Tiger Porsche Turret w/ Zimmerit
Scale: 1:35
Item Type: Plastic Model Armour Kit
Model Dimensions: Length 292.3mm, Width 107.3mm
Total Plastic Parts: 550+
Total Sprues: 19 sprues, lower hull and upper hull
Photo Etched Parts: 1 piece
Release Date: 2018-02
Additional:
- The kit consists of over 550 parts
- The kit w/refined detail
- Multi-slide moulded lower hull and turret
- Individual tracks
- Zimmerit included
- Photo etched parts included
£25.00 GBP
The German Molch was an 11 ton one-man midget submarine built in 1944. It was the first mini-submarine of the Kriegsmarine. The Molch was fully electrical, carried two G7e torpedoes - one on each side of the craft, and had a range of 64 km at 5 knots (9.3 km/h). 393 submarines were built in total, all by AG Weser in Bremen.
The Molch was first used to attack Allied battleships during the Allied Operation Dragoon. Ten out of the twelve submarines were lost and the remaining two were sunk by the Allies shortly after. In the following months the Molch was used in a number of operations but overall proved to be ineffective in combat and its use was reduced to training for more advanced submarines.
Item No: 80170
Item Name: German Molch Midget Submarine
Scale: 1:35
Item Type: Plastic Model Armour Kit
Model Dimensions: Length 310mm, Width 62mm
Total Plastic Parts: 70+
Total Sprues: 4 sprues
Photo-Etched Parts: 1 piece
Release Date: 2017-12
Additional:
- The kit consists of over 70 parts
- Photo-etched parts included
£20.00 GBP
Starter set for creating a diorama base, includes:
1x Mod Podge - BS Mod Podge Matte 8 Oz. / 236ml
Mod Podge - BS Mod Podge Matte 8 Oz. / 236ml
Suitable for paper craft projects
Is quick-drying for multiple coats build up and dries clear
Can be sanded to a smooth finish
Cleans up easily while wet with soap and water
Non-toxic and water-based
130g Bag of Amaco Plaster Sculptamold Modelling Compound White
Non-toxic and acid free
Made in USA
Designed for easy usage and storage
A modelling and casting compound for all ages. Finished objects are lightweight and extremely durable. This compound mixes easily and quickly with water and models like clay but sets like plaster in 30 minutes. It adheres to most clean surfaces and can be oven dried at 200 degrees. When dry Sculptamold can be sanded sawed carved or nailed without chipping.
Blue Styrofoam Sheet (20mm, A4 Sized)
Ideal for diorama bases, can be glued, cut or shaped with heat. High density modelling foam.
Milliput Modelling Clay - Standard (Yellow/Grey)
Comes in packs containing 2 x 56·7gm. Sticks and the general instructions for preparation and usage are the same.
The two sticks have a long shelf life but once mixed the resultant putty is at first soft and highly adhesive and then gradually hardens. Speed of hardening is dependant on temperature and at normal temperatures (20-25ºC) Milliput becomes rock hard in three to four hours. By the application of heat the setting time can be reduced to a few minutes.
After setting hard Milliput continues to cure and is fully cured after an elapse of time equal to the setting time at the same temperature. Once fully cured Milliput can be machined, drilled, tapped, turned, filed, sawn, sandpapered and painted. Milliput can be sandpapered and painted immediately it has set. (it is advisable to wear eye protection during this process).
Milliput is an excellent adhesive and will bond any of the following to itself or to any of the others - wood, brick, cement, metals, concrete, plastics, glass etc, but note that Milliput is not intended as a thin layer adhesive and should not be used where a paste, mucilage or thin glue is indicated. Milliput will set under water and is heat resistant up to 130°C.
£26.00 GBP
Academy 1:35 - M12 155mm GMC - Plastic model kit #13268
The U.S. 155mm Gun Motor Carriage M12 was a WWII self-propelled gun used from 1942 until the end of the war. A hundred vehicles were produced in total and initially those GMCs were intended for training. As the war progressed, it was decided to modify the M12s to prepare them for combat operations. The M12s were then successfully employed on the Western Front including the Allied assault of the Siegfried Line.
The M12 used the chassis of the M3 Lee tank. The 155mm gun was derived from the French 155mm GPF field gun. Due to the limited storage space, the vehicle could only carry 10 projectiles and propellant charges. The armoured driver's compartment was shared with the commander, and the gun crew were located at the back of the vehicle in an open top area.
Due to its powerful 155mm cannon, the vehicle was nicknamed "Doorknocker" and "King Kong". After the end of the war the M12 was replaced by the M40 Gun Motor Carriage.
£30.00 GBP
Academy 1:35 - M7 105mm SPG Priest - Plastic Model Kit #13210
The M7 Priest, a 105 mm Howitzer Motor Carriage was an American self-propelled artillery vehicle used during World War II by US, British and French forces. It was named Priest by the British Army because of the pulpit-style machine gun ring, and following on in theme from the Bishop and the contemporary Deacon self-propelled guns.
Download the manual here
Kit details:
- 318 parts (316 in olive green coloured styrene, 2 in steel coloured vinyl)
- Photo-etched parts and 4 marking options included
Decals provided:
- 2nd Armored Division, US Army, Sicily, July 1943
- Battery B, 14th AFAB, 2nd Armoured Division, US Army, Nomandy, July 1944
- 11th Regt, Royal Horse Artillery, 1st Armoured Division, El Alamein, 1942
- 31st Firing Battery, 64 RADB, 2nd Armoured Division, French Army, France, Sept 1944
£12.50 GBP
Miniart 1:35 - Panzerschreck RPzB.54 & Ofenrohr RPzB.43 Set - Plastic Model Kit #35263
The Panzerschreck (tank's bane) was the common name for the Raketenpanzerbüchse (abbreviated to RPzB), an 88 mm calibre reusable anti-tank rocket launcher developed by Nazi Germany in World War II. Another popular nickname was Ofenrohr ("stove pipe").
The Panzerschreck was designed as a lightweight man portable anti-tank weapon and was largely a replica of the US military bazooka. The weapon was shoulder-launched and fired a fin-stabilized rocket with a shaped-charge warhead. It was made in smaller numbers than the Panzerfaust, which was a disposable recoilless gun firing an anti-tank warhead.
Download instructions here.
This kit includes:
- Panzerschreck RPzB.54
- Ofenrohr RPzB.43
- Ammo boxes, backpacks and projectiles
- Photo-etched parts
- Decals
Box: 260mm x 162mm x 35mm
Sold Out
Academy 1:35 - M551 Sheridan "Gulf War" - Plastic Model Kit #13208
The M551 "Sheridan" AR/AAV (Armoured Reconnaissance/Airborne Assault Vehicle) was a light tank developed by the United States military. Designed to be parachuted in and swum across rivers. It was armed with the M81/M81 Modified/M81E1 152mm gun/launcher, which fired conventional ammunition and the MGM-51 Shillelagh guided anti-tank missile.
Click here to download the kit manual.
Includes:
- 470 total parts
- 457 yellow-sand styrene parts
- 12 steel coloured vinyl parts
- 1 nylon screen section
- Decal options
£14.00 GBP
Vallejo Model Air Set - DAK Colours 1941-1944, set #71207
Includes: 6 x 17ml paints
Vallejo Model Air is a range of acrylic paints designed for airbrush use. These colours are made with finely ground pigments and acrylic resin with extreme durability. The colours can be mixed with one another, diluted with water, Model Air Thinner or Varnish, depending on the desired effect. It is recommended to use Vallejo Model Air Thinner since it conserves the properties of the colours. Model Air paints adhere well to all surfaces, especially resin models, plastics, steel and white metal.
The set includes:
VAL 71.117 Braun (RAL 8020)
VAL 71.118 Grau (RAL 7027)
VAL 71.272 Gelbbraun (RAL 8000)
VAL 71.116 Graugrun (RAL 7008)
VAL 71.092 Olivegrun (RAL 6003)
VAL 71.056 Dunkelgrau (RAL 7021)
£55.00 GBP
Academy 1:35 - US Army M1A2 TUSK II Limited Edition - Plastic model kit #13504
The M1 Abrams is a modern U.S. 3rd-generation main battle tank in service since 1980. The M1 is used by the U.S. Army and Marine Corps, as well as the armies of Iraq, Egypt, Australia, Kuwait and Saudi Arabia. There are three main versions of the M1: the M1, M1A1, and M1A2. The M1A2 features a number of improvements compared to previous versions, including a commander's independent thermal viewer, position navigation equipment, weapon station, an improved cooling system, and digital maps.
Download instructions for this kit here
Option 1:
1st Battalion, 66th Armour Regiment
3rd Armoured Brigade Combat Team
4th Infantry Division, Germany, Feruary 2017
Option 2:
1st Battalion, 66th Armour Regiment
3rd Armoured Brigade Combat Team
4th Infantry Division, Germany, May 2017
£11.00 GBP
Miniart 1:35 - Anti-tank Obstacles - Plastic model kit #35579
The hedgehogs, or Czech hedgehogs, originated in Czechoslovakia and were first used on the country's border with Germany prior to the Munich Agreement and Germany's occupation of the Sudetenland. During WWII these anti-tank obstacles were widely used by the Soviet Union and proved to be especially effective in urban areas to block streets. Germany also used the hedgehogs as part of its defenses of the Atlantic Wall.
The Czech hedgehogs were normally made from sturdy metal, however the Soviet Union sometimes even used wood for this purpose. The obstacles were up to 1.4m high and consisted of 3 pieces of metal angle joined by gusset plates, rivets and bolts.
This kit contains parts for the assembly of 12 models of anti-tank obstacles.
Download instructions for this kit here
The kit contains 36 parts.
Box: 260mm x 162mm x 35mm
£6.00 GBP
Roket Cyano Range: Highest quality cyanoacrylate adhesives. Fluro-carbon barrier coated bottle for long shelf life and anti-clog action. Designed for use with precise Micro Tip anti-clog applicator system (DLXAC009)
20g bottles
Roket Hot: Super-thin, fast, penetrating adhesive; sets 1-5 sec.
Roket Rapid: Medium viscosity, fast setting adhesive; sets 5-10 sec.
Roket Max: Thick, maximum gap-filling adhesive; sets 10-20 sec.
£10.00 GBP
Wooden base with a very nice matt black finish on all sides, two sizes available:
Large: Size: 14 x 10 x 1.5cm / 5.5 x 4 x 0.5 inches
Medium: 11 x 9 x 1.5cm / 4.5 x 3.5 x 0.5 inches
Please note these are ideal as diorama bases for small scale scenes involving figures, small building sections or small light vehicles. We will post some images soon of the relative scale with 1/35 figures. Do check the sizing before ordering as these aren't intended for larger AFV dioramas. Made in Japan.
£45.00 GBP
The German tank destroyer Marder III was deployed from 1942 until 1945 on all fronts of the Second World War. The Marder used the chassis and the roofless fighting compartment of the Panzer 38(t). Its main armament was either the Soviet 76-mm divisional field gun M1936 or the German 75-mm Pak 40 anti-tank gun.
The Sd.Kfz.138 Ausf.M was the latest variant of the series armed with the 75mm Pak 40. Unlike the previous models, this variant featured sloped armour and an improved fighting compartment which was closed in the rear for better protection of the crew. The rear-mounted engine of the vehicle was replaced with an engine installed between the driver and the crew. This gave the crew more room in the fighting compartment decreasing their exposure to enemy fire. However, the compartment remained open-topped.
The crew of the Marder III Ausf.M included a commander, a gunner, a loader and a driver. About 1,000 units of the Ausf.M were built between 1943 and 1944.
Item No: 80169
Item Name: Marder III Ausf.M Tank Destroyer Sd.Kfz.138 - Early
Scale: 1:35
Item Type: Plastic Model Armour Kit
Model Dimensions: Length 148.2mm Width 61mm
Total Plastic Parts: 500+
Total Sprues: 10 sprues and lower hull
Metal Parts: gun barrel
Photo-Etched Parts: 1 piece
Release Date: 2017-10
Additional:
- The kit consists of over 500 parts
- Refined details
- Multi-slide moulded lower hull and turret
- Individual tracks
- Photo-etched parts included
£10.00 GBP
Meng Model 1:35 - Sd.Kfz.171 Panther Zimmerit Decals
When Germany started the production of the Panther Ausf. A, Zimmerit was used to cover the metal armour of the vehicles to prevent magnetic anti-tank mines from sticking to it. Zimmerit was applied to Panther tanks in different patterns as there was no exact requirement on the appearance of this coating.
Meng has selected four most popular and hard to replicate Zimmerit patterns and created a series of easy to use water slide decals representing those patterns. Use one of them with the TS-035 Sd.Kfz.171 Panther Ausf. A (Late) kit to add more realism to your Panther model.
Available options:
SPS-050 Sd.Kfz.171 Panther Zimmerit Decal A (Type 1)
SPS-051 Sd.Kfz.171 Panther Zimmerit Decal B (Type 2)
SPS-052 Sd.Kfz.171 Panther Zimmerit Decal C (Type 3)
SPS-053 Sd.Kfz.171 Panther Zimmerit Decal D (Type 4)
£11.50 GBP
Master Box 1:35 Bundeswehr German Military, Present Day - Plastic Figure Model Kit #35195
This kit contains parts for the assembly of five figures of Bundeswehr soldiers with weapons and accessories. The vehicle is not included in the kit.
Three figures of the vehicle crew members in different poses are wearing berets. Two infantrymen in bush hats are next to the vehicle, one is standing with his G36 and the other one is adjusting his backpack.
This kit is versatile and can be a good addition to a diorama featuring modern German vehicles.
Sold Out
A small blister pack of scatter for basing and diorama model building in 1/35 scale.
Forest Floor - Various fine grains of dark brown scatter and wood shavings, plus small sticks to create an effective woodland floor mix.
£3.50 GBP
A small blister pack of sand for basing and diorama model building in 1/35 scale.
Fine sand - Fine grains of sand
Heavy sand - More coarse sand grains.
Sand with rocks - A mix of fine sand with rocks.
£4.00 GBP
Ideal for mixing paint with thinners for airbrushing, these glass droppers have a rubber cap and fit into a vial for safe keeping. The glass pipette is tapered. The vial also avoids the issue of where to put the droppers after use and helps with keeping them clean. Overall size is very similar to a Vallejo paint pot, which means they fit in standard paint holders/stands.
Vial Volume: 10-12ML
7.2mm Pipette Volume: 10 ML/45UL
Dimensions:
Height: 58.5MM
Diameter: 22MM
£15.00 GBP
Royal Marine Mountain Leader / SBS / SAS Resin 1/35 scale figure
This figure represents a Mountain leader of the Royal Marines or British Special Forces soldier from the Falklands War conflict of 1982.
When Argentina invaded the Falklands in 1982, the Mountain and Arctic Warfare Cadre (M&AWC) was re-tasked from their training role to a combat role. Patrols were created for 3 Commando Brigade. Following the main amphibious landings on May 21st, 4-man patrols were inserted onto the islands where they carried out reconnaissance missions, adding to the capability that SAS and SBS patrols who already operating provided to the task force. Their operations were not limited to reconnaissance, however. Ten days after the main landings, the M&AWC engaged in a successful direct assault with Argentine Special Forces at Top Malo House.
Kit contains 1 x figure. Requires some assembly.
£16.50 GBP
Alliance Modelworks Stencils - WWII U.S. Vehicle Markings
These spray paint stencils are designed for creating clean marks typical for WWII U.S. Vehicle Markings. Made of stainless steel, the stencils are reusable and easy to clean. A small metal strip can be used as an alignment tool.
Directions:
Hold stencils close to the surface of the model to achieve the most thorough result. If the stencils do not fully touch the surface, mask more area and spray from further away to get clean marks. Practice on a test surface to understand how to best use these masks.
Sold Out
Alliance Modelworks Stencils - King Tiger s.SS.Pz.Abt 101 Detail
These spray paint stencils are designed for creating clean marks typical for King Tiger (Tiger II) tanks of the 101st SS Heavy Panzer Battalion. Made of stainless steel, the stencils are reusable and easy to clean. A small metal strip can be used as an alignment tool.
Directions:
Hold stencils close to the surface of the model to achieve the most thorough result. If the stencils do not fully touch the surface, mask more area and spray from further away to get clean marks. Practice on a test surface to understand how to best use these masks.
£45.00 GBP
Meng Model 1:35 - Sd.Kfz.171 Panther Ausf. A (Late) - Plastic model kit #TS-035
The German medium tank Sd.Kfz. 171, originally designated the Panzerkampfwagen V Panther, was used from 1943 until the end of WWII on Eastern and Western Fronts in Europe. The Panther Ausf. A was produced from August 1943 until August 1944 with 2,200 vehicles built in total by MAN, Daimler-Benz, Demag and Henschel. This was the second version of the tank which weighed more than any other Panther - 48 tons.
This Sd.Kfz. 171 Panther Ausf. A Late kit was released by Meng with the help of The Tank Museum in Bovington, UK.
The assembled model dimensions:
- Length 251.8mm
- Width 98.6mm
- Height 85.27mm
Kit details:
- 1118 total parts
- Plastic parts in red and black colour
- Clear plastic parts
- Photo-etched parts
- Metal cables
- Markings for six options are provided
Meng has created a series of water slide Zimmerit decals for this kit, check them out here.
£50.00 GBP
Miniart 1:35 - SU-122 (Last Production) with Interior - Plastic Figure Model Kit #35208
The Soviet Samokhodnaya Ustanovka 122 mm, or SU-122, was a self-propelled howitzer of the WWII period. '122' stands for the caliber of its main armament - 122mm M-30S howitzer. The SU-122 used the T-34 chassis. Its production began in 1942 and continued until 1944 with 1150 SU-122's built in total.
This kit contains parts for the assembly of the Soviet SU-122 with interior.
The kit contains 829 parts.
Box: 385mm x 240mm x 90mm
Download instructions for this kit here
Kit details:
- Highly detailed model
- Workable tracks
- Full interior of transmission compartment
- Fully detailed interior of fighting compartment
- V-2-34 engine included
- Fully detailed engine compartment
- 829 total parts
- 730 plastic parts
- 95 photo-etched parts
- 4 clear plastic parts
- Decal sheet for 3 options
£58.00 GBP
Miniart 1:35 - T-55 Soviet Tank Mod. 1963 with Interior - Plastic Figure Model Kit #37018
The production of T-55 started in January 1958 at Uralvagonzavod. Compared to the T-54, this tank had a number of differences, the main ones being NBC protection and a new engine. Overtime the T-54's were modernised and together with T-55's they formed the T-54/55 series. These tanks became the most inexpensive MBTs which together with their reliability led to the highest number of exports among any modern tanks in history.
This kit contains parts for the assembly of the Soviet medium tank T-55, model 1963 with interior.
The kit contains 1284 parts.
Box: 385mm x 240mm x 100mm
Download instructions for this kit here
Kit details:
- Highly detailed model
- Workable torsion bars
- V-55 engine included
- Fully detailed fighting compartment interior
- Drivers compartment interior accurately represented
- All hatches can be assembled in open position
- Individual track links
- 1284 total details
- 1091 plastic parts
- 167 photo-etched parts
- 26 clear plastic parts
- 12 variants of painting and marking
Build options:
- The kit can be assembled with or without fitting for mine roller system
- Fitting options for deep wading equipment
- 2 types of fuel tanks
- 2 types of toolboxes
- 2 options for anti-rain cover for the driver
- The kit can be built with or without gun mantlet cover
- 2 operating modes (day/night)
£11.00 GBP
Miniart 1:35 - Bundeswehr Tank Crew - Plastic Figure Model Kit #37032
This kit includes five figures of German tank crew members and can be a good addition to a diorama featuring modern German tanks.
Download instructions for this kit here
The kit contains 56 parts.
Includes parts for five figures.
Box: 260mm x 162mm x 35mm
£11.00 GBP
Miniart 1:35 - German Tank Crew Winter, Special Edition - Plastic Figure Model Kit #35249
This kit contains parts for the assembly of five WWII German tank crew members in winter uniforms. Weapons and accessories are provided.
View instructions and full contents of this kit here
The kit contains 80 parts.
Box: 260mm x 162mm x 35mm
£12.00 GBP
Trumpeter 1:35 Iraqi Tank Crew - Plastic Figure Model Kit #00439
This kit includes parts for the assembly of three figures of Iraqi tank crew members and six rifles.
Item No: 00439
Item Name: Iraqi Tank Crew
Item Type: Plastic Military Figure Kit
Total Parts: 30+
Total Sprues: 3 sprues
Release Date: 2017-08
£12.00 GBP
Trumpeter 1:35 Soviet Soldiers - Afghan War - Plastic Figure Model Kit #00433
The Soviet-Afghan War started in December 1979 and lasted for ten years until February 1989. The government of the Democratic Republic of Afghanistan and the Soviet Army fought against insurgent groups who were backed by the United States and Pakistan. The conflict began in 1978 when People's Democratic Party of Afghanistan took power and implemented a series of reforms which were unpopular among the rural population of Afghanistan. The government arrested thousands of people from the opposition and executed thousands of political prisoners. By 1979 the country was in open rebellion and the president Nur Mohammad Taraki was murdered under orders of the Minister of Foreign Affairs who then took the president's post. These events resulted in the Soviet decision to send its troops to Afghanistan in December 1979. During the course of the war, between 500 thousand and 2 million civilians were killed. Millions of Afghans fled the country as refugees mostly to Pakistan and Iran.
This kit includes parts for the assembly of three Soviet soldiers and seven rifles.
Item No: 00433
Item Name: Soviet Soldier - Afghan War
Item Type: Plastic Military Figure Kit
Total Parts: 50+
Total Sprues: 4 sprues
Release Date: 2017-07
£35.75 GBP
Academy 1:35 - Tiger I Early Operation Citadel - Plastic model kit #13509
The German heavy tank Panzerkampfwagen VI Tiger Ausf. E or Tiger I was the first German AFV to mount the 88mm KwK 36 gun. The Tiger I was produced from 1942 until 1944 with 1347 tanks built in total. The tank weighed around 56 tons and apart from the 88 mm KwK 36 was armed with two 7.92mm MG 34's.
After the Germans had encountered the Soviet T-34 and KV-1 tanks during Operation Barbarossa, it was decided to build a heavy and powerful tank to combat those vehicles. When the first Tiger I's were used on the battlefield, the tank was still at the prototype stage and a number of changes were made to the design over the course of production. The early Tiger I's were used in 1942 near Leningrad and many of those vehicles and transmission problems due to the vehicle's weight. The Soviets managed to capture one of the first Tigers which had been stuck in the ground and abandoned by its crew, and used it to study the design.
After Leningrad, in 1943 units operating at Kharkov received early Tiger tanks, and following that a great concentration of Schwere Panzer-Abteilung's was prepared for Operation Citadel. Operation Citadel - the German offensive against the Soviet army in Kursk - began on the 5th of July 1943 and became the final strategic offensive that Germany launched on the Eastern Front.
The following markings are provided:
8th SS Pz. Abt. 'Das Reich', Kursk, Russia, July 1943
9th SS Pz. Abt. 'Totenkopf', Kursk, Russia, July 1943
Pz. Abt. 503, Kursk, Russia, July 1943
Download instructions for this kit here
£19.00 GBP
This set contains eight colours for painting American vehicles according to the MERDC (Mobility Equipment Research and Development Center) camouflage system used by the United States Army during the 1970s. All colours included in this set correspond to the FS 595 (U.S. Federal Standard colours used in Government Procurement) colour chart.
This set allows you to paint various MERDC camouflage schemes, such as:
MERDC Summer Verdant
MERDC Tropical Verdant
MERDC Gray Desert
MERDC Red Desert
MERDC Snow/Open Terrain
MERDC Snow/Trees
MERDC Winter Verdant
These paints are water soluble and can be applied with a brush or an airbrush. Ready to use straight from the bottle. Shake the bottle well before each use.
Dilution is not necessary for airbrushing AK Interactive paints; however, when painting camouflage or fine lines, it is recommended to add a few drops of the AK Interactive thinner AK-712 which improves the performance of paint.
This set contains:
AK4231 Dark Green (FS34102)
AK4214 Light Green (FS34151)
AK4233 MERDC Sand (FS30277)
AK4234 Field Drab (FS30118)
AK4222 Earth Yellow (FS30257)
AK4013 Forest Green (FS34079)
AK4223 Earth Red (FS30117)
AK4237 Insignia White (FS37875)
£6.00 GBP
This polymer primer in Dark Yellow can be used as a base colour on vehicles in German Dunkelgelb and similar colours. Its excellent adhesion qualities and a matt-satin finish make this primer a great choice for preparing your models for painting. Full coverage can be achieved with just one layer.
The primer is water soluble, odourless and non-toxic. Shake well before each use. Dries completely in 24 hours.
AK Interactive Acrylic Thinner is recommended for use with this primer.
Includes: 1 x 60 ml bottle
£4.50 GBP
This is a non-toxic water based thinner designed for use with acrylics from AK Interactive or any other brand. The thinner allows you to achieve the perfect consistency of paint for brush and airbrush.
Includes: 1 x 17 ml bottle
£6.00 GBP
This grey primer is perfect for use as a base colour for any models. The primer has excellent adhesion qualities and a matt-satin finish which allows you to prepare your models for painting. Full coverage can be achieved with just one layer of primer.
The product is water soluble, odourless and non-toxic. Shake well before use. Dries completely in 24 hours.
AK Interactive Acrylic Thinner is recommended for use with this primer.
Includes: 1 x 60 ml bottle
£20.00 GBP
Meng Model 1:35 Pickup Mounted Rocket Pods - Resin Model Kit #SPS-034
This resin kit from the Meng Model Supplies series includes rocket pods which can be mounted on the back of 1/35 scale pick up trucks.
Download instructions for this kit here
£30.00 GBP
Revell 1:35 - SPz Marder IA3 Infantry Fighting Vehicle - Plastic Model Kit #03261
The German Marder is an infantry fighting vehicle which has served as the main weapon of the Panzergrenadiere since the 1970s. The Marder 1A3 has been the most commonly used version of the vehicle in service with the Bundeswehr. It is equipped with the 20 mm Rheinmetall MK 20 Rh202 autocannon as its main armament, and a 7.62 mm MG3 machine gun is mounted to the left of the cannon. The vehicle normally carries six missiles and a MILAN missile launcher can be attached to its turret. Marder 1A1 and 1A2 also had two gun ports on each side of the vehicle for additional fire against infantry targets. The 1A3 version has an extra layer of armour and storage boxes on the outside, and therefore does not have the gun ports.
The Marder has proven to be a successful IFV, but the aging design is currently being replaced by the Puma. The replacement began in 2010 and is scheduled to be completed by 2020.
This kit includes 182 parts.
£11.00 GBP
Miniart 1:35 - Finnish Tank Crew - Plastic Figure Model Kit #35222
During the Second World War, the Finnish army participated in three major conflicts - the Winter War in 1939-1940 which began with the invasion of Finland by the Soviet Union, the Continuation War between Finland and the Soviet Union which started just over a year after the Winter War and lasted until 1944, and the Lapland War between Finland and Germany from September 1944 until April 1945.
This kit includes five figures of Finnish tank crew members of the WWII period.
Download instructions for this kit here
The kit contains 50 parts.
Includes parts for five figures.
Box: 260mm x 162mm x 35mm
£11.00 GBP
Miniart 1:35 - Soviet Tank Crew at Rest (Special Edition) - Plastic Figure Model Kit #35246
This kit includes parts for the assembly of five Soviet tank crew members. Three ammo boxes with shells and weapons are included.
Download instructions for this kit here
The kit contains 116 parts.
Includes parts for five figures and accessories.
Box: 260mm x 162mm x 35mm
£43.00 GBP
Miniart 1:35 - GAZ-AAA With Shelter - Plastic Figure Model Kit #35183
In 1932, under the agreement with the Ford Motor Company a Soviet automobile-manufacturing plant located in Nizhny Novgorod developed its first two vehicles - Ford Model A and Ford Model AA. They were sold as NAZ-A and NAZ-AA respectively. In 1933, the plant was renamed from NAZ (Nizhegorodsky Avtomobilny Zavod, 'Nizhny Novgorod Automobile Plant') to GAZ (Gorkovsky Avtomobilny Zavod, 'Gorky Automobile Plant'). The vehicles' names were then changed to GAZ-A and GAZ-AA.
The 3-axle GAZ-AAA 6x4 truck was a successor of the 2-axle GAZ-AA. Its production ran from 1934 until 1943. Compared to the GAZ-AA, this vehicle was slightly slower and heavier, but its load capacity increased from 1.5 to 2 tons.
The kit contains 341 parts.
Box: 345mm x 240mm x 70mm
Additional:
- Highly detailed model
- Total details 341
- 314 plastic parts
- 20 photo-etched parts
- 7 clear plastic parts
- Decals included
- Full colour instructions
- Highly detailed chassis
- Engine is accurately represented
- Authentic wooden texture
- All doors can be assembled open or closed
Download instructions for this kit here
£43.00 GBP
Miniart 1:35 - SU-85 Mod. 1943 (Early) With Crew - Plastic Figure Model Kit #35178
The Soviet self-propelled gun SU-85 (Samohodnaya ustanovka 85) entered production in 1943 when the Red Army needed a powerful gun to defeat the new German tanks such as the Tiger I and later the Panther. The SU-85 was equipped with a D-5T high-velocity 85mm antitank gun which was capable of penetrating the Tiger I from 1000 meters. 2,050 vehicles had been built until 1944 when the SU-85 was replaced by the SU-100 armed with an even more powerful 100mm D-10S gun. The SU-85 saw service on the Eastern Front until the end of WWII. After the war it was exported to many Soviet states and other countries and remained in service for many years in certain countries such as Vietnam and North Korea.
The kit contains 613 parts.
Box: 385mm x 240mm x 90mm
Additional:
- Highly detailed model
- Workable track links
- 613 total parts
- 530 plastic parts
- 73 photo-etched parts
- 10 clear plastic parts
- 5 figures are included
- Decal sheet included
Download instructions for this kit here
£34.00 GBP
HobbyBoss 1:35 - 5cm Pak (t) Sfl. auf Fgst. Pz. Kpfw. 35R 731 (f) - Plastic model kit #83808
The Renault R35 was a French light infantry tank produced from 1936 until 1940. The R35 became one of the most numerous French tanks captured by the Germans. Germany captured a total of 843 R35's, over a hundred of which were designated Panzerkampfwagen 35R 731 (f) and used by panzer units mainly for security duties or driver training. Most of the captured tanks were later converted into artillery tractors and ammunition carriers after the turret was removed.
Germans decided that R35's would be more useful on the battlefield if they were converted into self-propelled guns. Using the R35 chassis they built a 4.7 cm Pak(t) (Sfl) auf Fgst.Pz.Kpfw.35 R 731(f). This proved to be rather difficult because the chassis was even smaller than that of Panzer I Ausf.B, and the tank designed for two Frenchmen was now supposed to carry three German soldiers and a fairly large gun with ammunition. This new vehicle was not very successful in service especially in winter conditions, so a decision was made to improve it by changing the gun for a 5cm PaK 38. However this plan never came into action because of technical limitations, and the project was cancelled.
Item No: 83808
Item Name: 5cm Pak (t) Sfl. auf Fgst. Pz. Kpfw. 35R 731 (f)
Scale: 1:35
Item Type: Static kit
Model Dimensions: Length 141.5mm, Width 55.3mm
Total Plastic Parts: 500+
Total Sprues: 14 sprues and hull
Photo-Etched Parts: 1 piece
Release Date: 2015-03
Additional:
- The kit consists of over 500 parts
- Multi-directional slide molded turret w/fine detail
- Photo-etched parts included
Sold Out
HobbyBoss 1:35 - M3A1 Scout Car 'White' Early Version - Plastic model kit #82451
The U.S. M3A1 Scout Car 'White' was produced from 1940 until 1944 with 20,918 vehicles built in total. The car was used for a number of purposes including patrol and scouting. It also served as a command vehicle, ambulance and gun tractor.
The M3 was used by the cavalry units of the U.S. Army in the North African Campaign, the invasion of Sicily, and a small number of vehicles were deployed in Normandy. The M3A1 was supplied to the Soviet Union and Britain under lend-lease. These vehicles were also used by the Free French Forces as well as Belgian, Czechoslovak and Polish units.
Item No: 82451
Item Name: U.S. M3A1 "White Scout Car" Early Production
Scale: 1:35
Item Type: Static kit
Model Dimension: Length 172mm, Width 74mm
Total Plastic Parts: 240+ pcs
Total Sprues: 10 pcs
Chromeplate Parts: n/a
Camouflage Scheme: US Army
Resin Parts: n/a
Metal Parts: n/a
Photo Etched Parts: 1 piece
Release Date: 2011-01
Additional:
- The kit w/refined detail consists of over 240 parts, includes 4 clear parts
- Detailed main tyres
- Photo-etched parts for engine fan, etc.
£10.00 GBP
Meng Model 1:35 - Sd.Kfz.182 King Tiger Zimmerit Decal - Plastic model kit #SPS-039
Zimmerit was used on WWII German AFVs since 1943 to cover the metal armour of the vehicle to prevent magnetic anti-tank mines from sticking to it. Zimmerit had the consistency of a thick paste or putty that after application was patterned and then hardened with a blow torch. This process usually happened at the factory and the patterns could vary depending on where the vehicle was produced. In the late 1944 Zimmerit was discontinued from application due to concerns that it could catch fire.
These water slide decals have a 3D printed texture to replicate Zimmerit applied to the early Kingtigers. This set is perfect for the Kingtiger Sd.Kfz.182 (Henschel Turret) kit from Meng.
£8.00 GBP
Meng Model 1:35 - Equipment for Modern US Military Vehicles - Plastic model kit #SPS-014
This equipment kit contains two identical sprues with 40 parts on each, and two vinyl tyres. A useful addition for a diorama featuring modern U.S. vehicles that will help you add more detail to the scene.
Included in the kit:
- M82 sniper rifles
- M240 machine guns
- 7.62mm ammo cans
- Plastic tanks
- 2 types of Jerry cans
- 2 types of plastic cans
- 3 types of coolers
- Spare tyres
The kit allows you to assemble two of each item listed above.
Check out the AK Interactive Basics & Equipment Colours Set for painting this kit.
£58.00 GBP
Miniart 1:35 - T-54-2 Soviet Tank Mod. 1949 with Interior - Plastic Figure Model Kit #37004
The Soviet T-54 main battle tank was introduced after the Second World War with the first prototype built in 1945. Production started in 1948 with the T-54-1, and in 1949 the Soviet Union launched the modernised version of the tank, the T-54-2. It had a modified turret inspired by the heavy IS-3 tank, the tracks were expanded to 480mm which helped reduce ground pressure, and the thickness of frontal upper plate was decreased to 100mm. In 1949-1951 the Stalin Ural Tank Factory No. 183 had built over 1200 T-54-2's before the next modernisation phase took place.
The kit contains 1007 parts.
Box: 385mm x 240mm x 80mm
Additional:
- Highly detailed model
- 1007 total parts
- 899 plastic parts
- 92 photo-etched parts
- 16 clear plastic parts
- Decal sheet for 6 variants
- Full colour instructions
- Highly detailed fighting compartment
- Highly detailed driver's compartment
- Interior of turret accurately represented
- V-54 engine included
- Cast steel surfaces accurately represented
- All hatches can be positioned open or closed
Download instructions for this kit here
£5.79 GBP
This weathering Wash is suitable for painting winter camouflage patterns of any kind and creating snowy scenes in dioramas. This is a clay-based product containing several non-toxic ingredients.
View Ultimate Winter Weathering Wash video tutorial here
Includes: 1 x 50 ml bottle
£11.00 GBP
Master Box 1:35 US Artillery Crew - Plastic Figure Model Kit #3577
This kit represents six American artillery crew members preparing their equipment for an operation. The crew consists of three loaders in different positions, one sponger (can be transformed into a loader with an additional set of arms), one gunner (two variants of arms positions), and a radio operator. A radio set and four separate helmets are provided.
The kit includes parts for the assembly of six figures and accessories.
Glue and paints are not included.
£29.00 GBP
Miniart 1:35 - Shed with Wooden Fence - Plastic model kit #35556
This kit from the Miniart Buildings and Accessories series contains parts for the assembly of a shed, a wooden fence, a ladder and a wooden table with benches.
The kit contains 235 parts.
Box: 345mm x 240mm x 80mm
Glue and paint are not included.
Download instruction sheets here.
£13.00 GBP
AK Interactive - OIF & OEF - US Weathering Set, AK120
This weathering set is designed for painting modern American vehicles in Afghanistan and Iraq. It contains a base colour representing the FS 33446 most commonly used on US forces vehicles in desert zones, as well as a wash and a product for creating streaking effects.
Check out the guide on applying OIF & OEF Wash here
Check out the guide on applying OIF & OEF Streaking Effects here
This set contains:
AK-121 OIF & OEF Wash
AK-122 OIF & OEF US Vehicles Base colour
AK-123 OIF & OEF Streaking Effects
We are suppliers of 1/35 scale plastic model kits and accessories for the detailed modeller. In our shop you can buy WWII tanks, figures, model paints, weathering products and various modelling tools. We stock Tamiya, Dragon, Meng Models, Trumpeter, Academy, HobbyBoss, Eduard, AK Interactive, Acrylicos Vallejo, Revell, MasterBox, Miniart and more. We are adding Tamiya and Dragon models in the coming weeks and we would love to know what kits you would like to see in our store. Feel free to drop us an email and share your thoughts. You can also follow us on Facebook and Instagram or subscribe to our weekly newsletter for offers and news.
© 2018 Panzer Models. Prepared by Article.
