Vehicles
Miniart 1:35 - Pz.Kpfw III/IV Early Type Track Links
Sold Out
Miniart 1:35 - Pz.Kpfw III/IV Early Type Track Links - Plastic model kit #35235
These workable track links are suitable for the following tank models:
Pz.Kpfw. III Ausf.A
Pz.Kpfw. III Ausf.B
Pz.Kpfw. III Ausf.C
Pz.Kpfw. III Ausf.D
(Each track link contains 96-98 tracks)
Stug III Ausf.A
Pz.Kpfw. III Ausf.E
Pz.Kpfw. III Ausf.F
(Each track link contains 94 tracks)
Pz.Kpfw. IV Ausf.A
Pz.Kpfw. IV Ausf.B
Pz.Kpfw. IV Ausf.C
Pz.Kpfw. IV Ausf.D
Pz.Kpfw. IV Ausf.E
(Each track link contains 101 tracks)
The kit contains 721 parts for the assembly of Pz.Kpfw III/IV track links.
Box: 260mm x 162mm x 35mm
Meng Model 1:35 - King Tiger Sd.Kfz.182 (Henschel Turret)
Sold Out
Meng Model 1:35 - King Tiger Sd.Kfz.182 (Henschel Turret) - Plastic model kit #TS-031
The Tiger II was a German heavy tank of WW2. Its official German designation was Panzerkampfwagen Tiger Ausf. B, often shortened to Tiger B. It is also known under the informal name Königstiger ("Bengal Tiger"), often translated as King Tiger or Royal Tiger by Allied troops. The initial design of the Tiger II was developed in 1937 by the Henschel company. Another design was developed by Porsche in 1939, but it was declined due to higher production costs.
Based on the Tiger I, the Tiger II combined the thick armour of its predecessor and the sloped armour of the Panther medium tank. The tank weighed almost seventy tonnes, it was protected by 100 - 180mm of armour at the front, and was armed with the long barrelled Kampfwagenkanone 8.8cm 43 L/71 gun which proved to be efficient against all Allied tanks.
The Tiger II first saw combat during the Battle of Normandy in 1944. Fortunately for the Allies, German plants were severely disrupted by Allied bombing, so a relatively small number of Tiger II's were built. Mass production ran from 1944 to the end of the war and only 492 units were produced during that period.
The kit includes parts for the King Tiger Sd.Kfz.182 heavy tank with two different gun mantlets.
Academy 1:35 German Pz. Kpfw. VI Tiger I (Early version, with interior)
Sold Out
Academy 1:35 - German Pz. Kpfw. VI Tiger I (Early version, with interior) - Plastic model kit #13239 (Replaces ACA01348)
The Tiger I, a German heavy tank of World War II, was deployed from 1942 in Africa and Europe commonly in independent heavy tank battalions with the designation Panzerkampfwagen VI Tiger Ausf. E often shortened to Tiger. The Tiger I gave the Wehrmacht its first armoured fighting vehicle that used the KwK 36 88-mm gun. In total 1,347 were built between August 1942 and August 1944. Production was over time phased out in favour of the Tiger II.
The Tiger I has been called an excellent design for its time, however it was over-engineered, using expensive materials and labour-intensive production methods. The Tiger was prone to some types of track failures and breakdowns, and had limited range given its high fuel consumption. It was expensive to run, but normally mechanically reliable. It was also difficult to transport, and vulnerable to immobilisation when mud, ice and snow froze between its overlapping and interleaved Schachtellaufwerk-pattern road wheels, often causing them to jam. This was a problem on the Eastern Front in the muddy rasputitsa (semi-annual mud seasons) and winter weather conditions.
The tank was named "Tiger" by Ferdinand Porsche, and the Roman numeral was added after the later Tiger II entered production. The early designation was Panzerkampfwagen VI Ausführung H (‘‘Panzer VI version H’’, abbreviated PzKpfw VI Ausf. H) where 'H' denoted Henschel as the designer/manufacturer. It was given ordnance inventory designation SdKfz 182. The tank was later redesignated as PzKpfw VI Ausf. E in March 1943, with ordnance inventory designation SdKfz 181.
Tigers had a crew of 5. They could travel up to 23mph on roads and were powered by the Maybach 21, 353cc V-12 engines that delivered 642hp.
HobbyBoss 1:35 - Pz. Kpfw. I Ausf. A (Early/Late)
Sold Out
The Panzerkampfwagen I was a light tank developed in Germany in the run-up to WWII. Abbreviated Pz. Kpfw. I, the tank was officially designated Sd.Kfz.101.
As Germany was restricted by the Treaty of Versailles in its military capability, the first tank prototypes were produced under the code name Landwirtschaftlicher Schlepper which meant 'Agricultural Tractor'. The prototypes were armed with two 7.92 mm MG 13 machine guns and were used as training vehicles by German armed troops.
The Ausf. A was the first combat vehicle of the Panzer I series. Its thin armour and suspension problems resulted in weak performance on the battlefield. However, the improved versions were in military service during all German campaigns between 1939 and 1941 including the Invasion of Poland and the Battle of France.
Although the Panzer I models were of little use against even the lightest tanks of that era, they contributed significantly to the development of German military production.
Item No: 80145
Item Name: Pz. Kpfw. I Ausf. A Sd.Kfz.101 (Early/Late)
Scale: 1:35
Item Type: Plastic Model Armour Kit
Release Date: 2016-09
HobbyBoss 1:35 German Pz. Kpfw. II Ausf. J (VK16.01) Early
£28.00 GBP
The Panzer II tanks were produced from 1935 till 1943 and played an important role in the early years of WWII. By 1940-41 they were supplanted by the Panzer III's and Panzer IV's. The Pz.Kpfw.II was used during the Polish and French campaigns, in North Africa against the British, and on the Eastern Front against the Red Army.
The Panzer II Ausf. D, Ausf. E, Ausf. F and Ausf. L were designed as reconnaissance tanks. Continued development of the reconnaissance tank concept led to the much up-armored Ausf. J, which used the same concept as the Pz. Kpfw.I Ausf. F of the same period and had an experimental designation VK1601. This version had heavier armour, with protection brought up to 80mm on the front and 50mm on the sides and rear. With 25mm roof and floor plates, the Pz. Kpfw. II Ausf. J had a total weight of 18 tons. It was equipped with the same Maybach HL45P as the Pz. Kpfw.I Ausf. F, and its top speed was reduced to 31 km/h. Primary armament was the 2cm KwK38 L/55 gun.
22 of these tanks were produced between April and December 1942, and seven were issued to the 12th Panzer Division on the Eastern Front.
Item No: 83803
Item Name: German Pz. Kpfw. II Ausf. J (VK16.01)
Scale: 1:35
Item Type: Static kit
Model Dimensions: Length 124.6mm, Width 82.5mm
Total parts: 300+
Total Sprues: 10 sprues, upper hull and lower hull
Photo Etched Parts: 1 piece
Release Date: 2013-05
Additional:
- The kit consists of over 300 parts
- Multi-directional slide molded lower hull w/fine detail
- Photo-etched parts included
HobbyBoss 1:35 - Sd.Kfz.222 Leichter Panzerspahwagen 2cm
£32.00 GBP
The Leichter Panzerspähwagen was a light four-wheel drive armoured car produced by Nazi Germany between 1935 and 1944. It had the standard sPkw I Horch 801 chassis and a 67 kW (90 hp) Horch 3.5 petrol engine, which gives it a road speed of 80 km/h and a cross-country speed of 40 km/h. The car had a maximum range of 300 km. Its armament consisted of one 2 cm KwK 30 L/55 main cannon and one MG 34 secondary machine gun.
The Leichter Panzerspähwagen was used by the reconnaissance battalions of the Panzer divisions. It performed well enough in countries with good road networks, like Western Europe, but on the Eastern Front and in North Africa it was hampered by its relatively poor off-road performance and was gradually replaced in the reconnaissance role by the Sdkfz 250 half-track.
Item No: 82442
Item Name: Sd.Kfz.222 Leichter Panzerspahwagen 2cm
Scale: 1:35
Item Type: Static kit
Model Dimension: Length 131.55mm Width 60.5mm
Total Plastic Parts: 297 pcs
Total Sprues: 5 sprues, upper hull, lower hull and 4 tires
Camouflage Scheme: Deutsches Afrika Korps (DAK)
Photo Etched Parts: 3 pcs
Release Date: 2009-11
Additional:
- Fully detailed Interior
- Multi-directional slide moulded upper hull
- Two-directional slide moulded lower hull
- Photo-etched parts included
Meng Model 1:35 - Sd.Kfz.182 King Tiger Workable Tracks
Sold Out
Meng Model 1:35 - Sd.Kfz.182 King Tiger Workable Tracks - Plastic model kit #SPS-038
These workable tracks are designed for the Meng Model King Tiger Sd.Kfz.182 as an alternative to the tracks included in the box. After assembly all track links remain movable, which helps create a realistic representation of the tank. The kit also includes torsion bars and connecting pins made of metal.
Master Box 1:35 - Separate caterpillar tracks
Sold Out
Master Box 1:35 Separate caterpillar tracks - Plastic Figure Model Kit #3505
These separate caterpillar tracks are suitable for the assembly of several German tanks and other vehicles deployed during the Second World War. Initially the tracks were designed for the Panzer I light tank in 1933 and later used on other Wehrmacht models.
The kit includes parts for a pair of separate tracks required for the assembly of one model. Glue and paint are not included.
Suitable for the following models:
- Panzerwerfer 42 auf Maultier
- Jagdpanzer I Ausf.B
- Befeglwagen 3KLB
- Opel Blitz Maultier
- Panzer I Ausf.B
Master Box 1:35 - 'Kradschutzen' German Motorcycle Troops
Sold Out
Master Box 1:35 'Kradschutzen' German Motorcycle Troops on the move - Plastic Figure Model Kit #3548
This kit includes parts for the assembly of four figures and one motorcycle.
Miniart 1:35 British Bantam 40 BRC w/Crew
Sold Out
Miniart 1:35 - British Bantam 40 BRC w/Crew - Plastic model kit #35324
At the outbreak of WWII, the American Army starting looking for a General Purpose Vehicle. The American Bantam Company came up with a design that passed rigorous testing, but they didn’t have the required capacity for the mass production. As the Government now owned the design, they contracted out the build to Willys Overland and Ford in 1941, and they came up with a slightly altered version in the form of the familiar Willys Jeep.
The American Bantam company did end up producing 2675 Bantam BRC- 40’s, but once the US Army standardised the production of the Ford and Willys version all the Bantams were either issued to Britain or Russia under the Lend Lease scheme. The British used the some of the limited number they received in the Desert Campaign in North Africa.
Includes parts for one vehicle and three figures.
Box: 290mm x 190mm x 45mm
Meng Model 1:35 - Sd.Kfz.182 King Tiger Interior (Henschel)
Sold Out
Meng Model 1:35 - Sd.Kfz.182 King Tiger Interior (Henschel turret) - Plastic model kit #SPS-037
The Tiger II, or Panzerkampfwagen Tiger Ausf. B, was a German heavy tank of the Second World War. It is also known under the informal name Königstiger, often translated as King Tiger by Allied soldiers.
Based on the Tiger I, the Tiger II combined the thick armour of its predecessor and the sloped armour of the Panther tank. The tank weighed almost seventy tonnes. It was protected by 100-180mm armour at the front, and was armed with the long barrelled Kampfwagenkanone 8.8cm 43 L/71 gun which proved to be efficient against all Allied tanks.
This kit contains parts for the interior of the Meng Model King Tiger Sd.Kfz.182.
Kit details:
- Chassis replicated in detail
- The driver’s and radioman’s seats presented
- Periscopes reproduced in clear parts
- Fuel tanks on both sides of the chassis
- Torsion bar parts for movable suspension included
- The Maybach HL230 engine, drive shaft and transmission, all perfectly replicated
- The Turret fitted with a KwK 43 L/71 gun
- Spare periscopes provided
- Storage box of the co-axial machine gun spare barrels included
- APC, HVAP and HEAT rounds included
- The commander's cupola finely replicated
HobbyBoss 1:35 German VK1602 Leopard
£30.00 GBP
The German VK1602 Leopard was designed in 1942 as a reconnaissance tank based on the Pz. Kpfw. II Ausf. J (VK 1601). It was planned to finish the first prototype by the 1st of September 1942, and the serial production was scheduled for April 1943. However, the project was abandoned when the first prototype was still incomplete. The reason for cancellation was that the tank's gun, the 50 mm L/60, was insufficient to fight against modern Soviet and Western tanks, which made the vehicle vulnerable. Moreover, the Leopard had a very high weight (21900 kg). The fact that the Leopard was similar to the Panther meant that a reconnaissance Panther could be developed and produced at lower cost.
Item No: 82460
Item Name: German VK1602 LEOPARD
Scale: 1:35
Item Type: Static kit
Model Dimension: Length 161.78mm, Width 88.40mm
Total Plastic Parts: 653 pcs
Total Sprues: 19 sprues, upper hull and lower hull
Chromeplate Parts: n/a
Camouflage Scheme: German ARMY
Photo Etched Parts: 1 piece
Release Date: 2010-08
Additional:
- 2-directional slide moulded turret
- 2-directional slide moulded lower hull
- 144 individual track links in light grey plastic
Academy 1:35 German Pz. Kpfw. VI Tiger I (Early version, no interior)
Sold Out
Academy 1:35 - German Pz. Kpfw. VI Tiger I Early version, no interior with 4 figures - Plastic model kit #13264 (ACA01386)
The Tiger I, a German heavy tank of World War II, was deployed from 1942 in Africa and Europe commonly in independent heavy tank battalions with the designation Panzerkampfwagen VI Tiger Ausf. E often shortened to Tiger. The Tiger I gave the Wehrmacht its first armoured fighting vehicle that used the KwK 36 88-mm gun. In total 1,347 were built between August 1942 and August 1944. Production was over time phased out in favour of the Tiger II.
The Tiger I has been called an excellent design for its time, however it was over-engineered, using expensive materials and labour-intensive production methods. The Tiger was prone to some types of track failures and breakdowns, and had limited range given its high fuel consumption. It was expensive to run, but normally mechanically reliable. It was also difficult to transport, and vulnerable to immobilisation when mud, ice and snow froze between its overlapping and interleaved Schachtellaufwerk-pattern road wheels, often causing them to jam. This was a problem on the Eastern Front in the muddy rasputitsa (semi-annual mud seasons) and winter weather conditions.
The tank was named "Tiger" by Ferdinand Porsche, and the Roman numeral was added after the later Tiger II entered production. The early designation was Panzerkampfwagen VI Ausführung H (‘‘Panzer VI version H’’, abbreviated PzKpfw VI Ausf. H) where 'H' denoted Henschel as the designer/manufacturer. It was given ordnance inventory designation SdKfz 182. The tank was later redesignated as PzKpfw VI Ausf. E in March 1943, with ordnance inventory designation SdKfz 181.
Tigers had a crew of 5. They could travel up to 23mph on roads and were powered by the Maybach 21, 353cc V-12 engines that delivered 642hp.
Kit details:
- 312 parts in tan and black plastic
- 88mm gun elevates and turret rotates
- Separate road wheels and suspension arms; tracks are rubber band type
- External details include exhausts and exhaust shields, hatches, smoke generators and headlights
- 4 figures included
- Detailed engine access and turret hatches
One decal sheet with 4 marking options:
1: #S13, 2nd SS Panzer Div. "Das Reich, Kursk, Russia, 1943.
2: #S03, 1st SS Panzer Div., Michael Wittmann, Berdichev, Russia, Jan 1944.
3: #123, 502nd Heavy Tank Btn, Otto Carius, Lovetz, Russia, 1943.
4: #712, 504th Heavy Tank Btn, Tunisia, Afrika Korps, 1943.
Meng Model 1:35 - British Army Husky Tactical Support Vehicle
Sold Out
Meng Model 1:35 - British Army Husky Tactical Support Vehicle - Plastic model kit #MNGVS-009
This is a 1:35th scale British Army Husky Tactical Support Vehicle from Meng Models.
This plastic model is 183mm long, 81mm wide and 85mm high and has a total of 320 parts.
It features perfectly reproduced interiors of the crew compartment.
Doors can be built open or closed.
The roof weapon station is rotatable.
Front wheels are steerable.
Like other MENG kits, it also has clear lights and fine PE parts.
A useful review with more pictures here.
See also the Sagged Wheel resin set here.
PLEASE NOTE: Paints and Glue are required to build this model and must be bought separately.
HobbyBoss 1:35 - Sd.Kfz.182 King Tiger Porsche Turret
Sold Out
HobbyBoss 1:35 - German Sd.Kfz.182 King Tiger Porsche Turret w/ Zimmerit - Plastic model kit #84530
Development of the Tiger II heavy tank started in 1937 with design contracts given to Henschel and Porsche. Both companies used the same turret in their prototypes (designed by Krupp) but the tanks had differences in the hull, transmission and suspension systems. The Porsche design featured a rear-mounted turret and a mid-mounted engine, and the suspension was the same as on the Elefant. The Henschel version which was more conventional won the contract and all King Tigers were produced by the company.
Production vehicles used two turret designs. The initial turret had a rounded front, sloped sides and a curved bulge on the left side for commander's cupola which proved to be difficult to manufacture. This turret is often called 'Porsche turret' as opposed to the more common 'production turret' or 'Henschel turret'. Fifty King Tigers had received the early 'Porsche turret' before the design was simplified.
The production of King Tigers was disrupted by the Allied bombings with five raids in September and October 1944 alone destroying 95% of the floor area at the Henschel plant. Initially orders were placed for 1,500 King Tigers but only 492 units were produced until the end of the war.
Item No: 84530
Item Name: German Sd.Kfz.182 King Tiger Porsche Turret w/ Zimmerit
Scale: 1:35
Item Type: Plastic Model Armour Kit
Model Dimensions: Length 292.3mm, Width 107.3mm
Total Plastic Parts: 550+
Total Sprues: 19 sprues, lower hull and upper hull
Photo Etched Parts: 1 piece
Release Date: 2018-02
Additional:
- The kit consists of over 550 parts
- The kit w/refined detail
- Multi-slide moulded lower hull and turret
- Individual tracks
- Zimmerit included
- Photo etched parts included
Tamiya 1:35 - German Schwimmwagen Type 166
Sold Out
The Schwimmwagen Type 166 was an amphibious four-wheel drive off-roader produced by Volkswagen and extensively used by German ground forces during WWII. The Type 166 was made smaller than its prototypes in order to improve the vehicle's efficiency, and had a wheel-base of only 200 cm. From 1941 to 1944, over 15,500 Type 166 Schwimmwagen cars were produced, which made the VW 166 the most mass-produced amphibious car in history.
The kit includes parts for the assembly of one vehicle with a driver. Certain accessories pictured are not included.
Revell 1:35 M34 Tactical Truck & Off Road Vehicle
Sold Out
Revell 1:35 - M34 Tactical Truck & Off Road Vehicle - Plastic Model Kit #03260
The M34/35 series of trucks originated in 1949 and became one of the most successful series of trucks used by the US military. The first in the family was the M34 - a 2.5 ton all-wheel-drive off-road truck. Manufacturing of the M34 began in 1950 and this closely followed by the development of the M35 truck.
These trucks served in Vietnam and remained in service with various modifications until the late 1990s. Being 2.5 ton trucks, they were often called "deuce and a half" just like their WWII predecessor GMC CCKW.
Includes:
- M34 Truck with many surface details
- Detailed off-road vehicle
- Removable tarpaulin
- Flatbed construction with benches
- Rubber tyres
- Detailed chassis
Versions for M34:
- M34 2,5t Truck, US Army, 77th Transportation Company, 106th Transportation Battalion, La Rochelle, France, 1957
- M34 2,5t Truck, Spanish Army, Melilla, North Africa, 1976
Versions for the off-road vehicle:
- Off-Road Vehicle, US Army, 77th Transportation Company, 106th Transportation Battalion, La Rochelle, France, 1957
- Off-Road Vehicle, US Marine Corps, Lebanon, 1950's
Total parts: 98
Skill level: 4
Release date: 09/2017
Miniart 1:35 AEC Mk I Armoured Car
Sold Out
Miniart 1:35 - AEC Mk I Armoured Car - Plastic model kit #35152
The British AEC heavy armoured cars were built by the Associated Equipment Company (AEC) during WWII, with the first car produced in 1941. The AEC Mk I was equipped with the Valentine Mk II turret, featuring the 2-pounder gun. The Mk I had an AEC 195 diesel engine and weighed eleven tonnes. Over a hundred Mk I vehicles were built and many of them saw action in the North African Campaign.
The kit contains 496 parts.
Includes parts for one British armoured car.
Box: 345mm x 240mm x 80mm
- Highly detailed model
- 436 plastic parts
- 60 Photo-Etched metal parts
- Decal options for three vehicles
- Full-colour instruction
- New tooling: state of the art engineering utilising slide mould technology
- Fully detailed interior
- Highly detailed engine compartment
- Accurately represented engine, fighting compartment and driving compartment interior
- Driver’s vision periscopes moulded in clear plastic
- All doors and hatches can be assembled open or closed
- Slide-mould tyre tread pattern moulded in one part
Miniart 1:35 - European Tram Car with Crew and Passengers
Sold Out
Miniart 1:35 - European Tram Car with Crew and Passengers - Plastic model kit #38009
This is an unassembled plastic model kit containing a model of a European tram with tram supports, a crew with passengers, street accessories and a base.
The kit contains 810 parts.
Box: 345mm x 240mm x 100mm
Meng Model 1:35 British Heavy Tank Mk.V Male
Sold Out
Meng Model 1:35 - British Heavy Tank Mk.V Male - Plastic model kit #TS-020
The British heavy tank Mk.V Male, also known as the Mark V, was put into service in 1918, near the end of WWI. Based on the Mark IV, the Mk.V differed greatly from its predecessor, thanks to its Wilson gearbox the tank required only one man to set it in motion. The main distinctive feature of the exterior was the air cooling system installed on each side of the tank. In addition, the design was improved by a Ricardo engine and an extra mounted machine-gun.
The Mark V first saw action during the Australian offensive against the German units in Northern France, called the Battle of Hamel. The tank was also used by both the White Armed Forces in the Russian Civil War and the Red Army afterwards.
Until the end of WWI a total of 400 Mk.V tanks were built, both Males and Females. The Males carried two 57 mm guns and four machine guns, while lighter and smaller Females were armed with six machine guns only.
Dimensions: Length 243mm, Width 112mm
Additional:
- The kit includes a riveted rhomboid hull
- All hatches can be built in either open or closed position
- Sponsons and cement-free tracks
- Engine and interior reproduced in detail
Meng Model 1:35 - Sd.Kfz.171 Panther Ausf. A (Late)
Sold Out
Meng Model 1:35 - Sd.Kfz.171 Panther Ausf. A (Late) - Plastic model kit #TS-035
The German medium tank Sd.Kfz. 171, originally designated the Panzerkampfwagen V Panther, was used from 1943 until the end of WWII on Eastern and Western Fronts in Europe. The Panther Ausf. A was produced from August 1943 until August 1944 with 2,200 vehicles built in total by MAN, Daimler-Benz, Demag and Henschel. This was the second version of the tank which weighed more than any other Panther - 48 tons.
This Sd.Kfz. 171 Panther Ausf. A Late kit was released by Meng with the help of The Tank Museum in Bovington, UK.
The assembled model dimensions:
- Length 251.8mm
- Width 98.6mm
- Height 85.27mm
Kit details:
- 1118 total parts
- Plastic parts in red and black colour
- Clear plastic parts
- Photo-etched parts
- Metal cables
- Markings for six options are provided
Meng has created a series of water slide Zimmerit decals for this kit, check them out here.
Meng Model 1:35 - Interior Set for M3A3 Bradley w/ Busk III
Sold Out
Meng Model 1:35 - Interior Set for M3A3 Bradley w/ Busk III - Plastic model kit #SPS-017
The M3 Bradley is an American cavalry fighting vehicle (CFV) of the Bradley Fighting Vehicle family. It is used by US heavy armoured cavalry units mainly in reconnaissance operations. Similar to the M2 series, the M3 is armed with the 25 mm M242 chain gun and the dual TOW anti-tank missile launcher. The 7.62 mm M240C machine gun is included as secondary armament. Compared to the M2, the M3 is able to carry more TOW missiles and ammunition, although its design lacks firing ports which are present on M2 vehicles.
The M3A3 is the latest model of the M3 series. It has been improved with more advanced information and communication equipment as well as the commander's independent thermal sights and thicker armour on the roof. Also, the M3A3 has been equipped with the Improved Bradley Acquisition System (IBAS) which allows automatic adjustment of the gun, automatic alignment of the optical sights with the gun barrel and gives the ability to track two targets simultaneously. The M3A3 and other M3 vehicles saw action during the Gulf War in 1990 and the Invasion of Iraq in 2003.
This kit reproduces the interior of the Meng Model M3A3 Bradley BUSK III CVF (SS-006). It includes parts for the driver's, passenger's and turret compartments as well as parts for the engine. The kit contains highly detailed decals and two soft-plastic seat belts. The decals replicate data screens and markings for TOW anti-tank missiles placed inside the vehicle. The instruction with a painting colour reference chart (for Vallejo paints) is also provided.
Kit details:
- 4 pale green styrene sprues
- 2 grey styrene sprues
- 2 flexible styrene belts
- 1 photo-etched brass sheet
- 1 decal sheet
- 1 instruction booklet
Includes decals for two variants of the M3A3 Bradley:
- 6th Squadron, 9th Cavalry Regiment, 1st Cavalry Division, US Army, Fort Hood, 2014
- 4th Infantry Division, US Army, Fort Carson, 2013
Master Box 1:35 - German Military Bicycle WWII
Sold Out
Master Box 1:35 German Military Bicycle WWII - Plastic Model Kit #35165
German military bicycles (Truppenfahrrad, Troops Bike) were manufactured by several different companies and were largely used during WWII. These bicycles helped maintain connections between troops and generals, deliver mail and carry panzerfausts.
This kit includes parts for the assembly of one WWII German bicycle in different variants. Photo-etched parts are provided.
HobbyBoss 1:35 German Sd. Kfz. 254 Tracked Armoured Scout Car
£37.00 GBP
The Saurer company started to develop the vehicle in 1936 as an artillery tractor for the Austrian army. The first tractors were produced in 1938. About 12 vehicles were made prior to Anschluss (incorporation of Austria into Nazi Germany, March 1938). After the Anschluss production continued. A total of 140 units were built with the new designation RK-7 (Räder-Kettenfahrgestell), although Wehrmacht called them Sd. Kfz. 254. The vehicle had a wheel/track layout and a diesel motor. The wheels were lowered when it was used on roads and retracted for cross-country movement. Some Sd. Kfz. 254's served as artillery observation vehicles for the Afrika Korps after being fitted with a radio and rail antenna.
Item No: 82491
Item Name: German Sd. Kfz. 254 Tracked Armoured Scout Car
Scale: 1:35
Item Type: Static kit
Model Dimension: Length 123.8mm, Width 64.8mm
Total Plastic Parts: 520+
Total Sprues: 20 sprues, upper hull, lower hull and tires
Photo Etched Parts: 1 piece
Release Date: 2012-05
Additional:
- The kit consists of over 520 parts
- Multi-directional slide moulded lower hull and upper hull
- Rubber tires have very good details
- 324 individual tracks links
- Photo-etched parts included
HobbyBoss 1:35 German Panzer Kpfw. 38 (t) Ausf. E/F
Sold Out
Initially the Panzer Kpfw. 38 (t) Ausf. E/F was a Czech tank designed before WW2. Its military designation was LT vz. 38 (Lehký tank vzor 38, Light Tank model 38). When Germany took over Czechoslovakia, the tank was adopted by the German Army and saw service in Poland, France and Russia. The (t) stands for 'tschechisch', the German word for Czech.
Panzer Kpfw. 38 (t) Ausf. E/F had a 3.7cm main gun and a 125hp engine allowing it to move at 42km/h. Over 1400 tanks were manufactured, until in 1942 production ended due to inadequate armament. The chassis continued to be produced for the Marder III, and some of the tank's components were used in the later Jagdpanzer 38 tank destroyers, turretless assault guns, as well as anti-tank and anti-aircraft guns.
Item No: 80136
Item Name: German Panzer Kpfw.38 (t) Ausf. E/F
Scale: 1:35
Item Type: Static kit
Total Sprues: 11 sprues
Release Date: 2015-09
HobbyBoss 1:35 German Panzer IV / 70 (A) Sd. Kfz 162/1
Sold Out
The Ausführung A (or Ausf. A, "Variant A"), built in 1936, was the first mass-produced version of Panzer IV. It had the Maybach's HL 108TR engine, producing 250 PS (183.87 kW), and used the SGR 75 transmission with five forward gears and one reverse gear. Ausf. A achieved a maximum road speed of 31 kilometres per hour (19.26 mph). Its main armament was a short-barreled Kampfwagenkanone 37 L/24 (KwK 37 L/24) 75mm (2.95 in) tank gun, which was primarily designed to fire high-explosive shells.
The KwK 37 fired Panzergranate (armor-piercing shell) at 430 metres per second (1,410 ft/s) and could penetrate 43mm (1.69 in) at ranges of up to 700 metres (2,300 ft). The Ausf. A was protected by a 14.5mm (0.57 in) steel armour on the front plate of the chassis, and 20mm (0.79 in) on the turret. This armour could only stop artillery fragments, small-arms fire, and light anti-tank projectiles. Only 35 Ausf. A's were built, and in 1937 production moved to the Ausf. B.
Item Name: German Panzer IV / 70 (A) Sd. Kfz 162/1
Scale: 1:35
Item Type Static kit
Total Sprues:19 sprues and lower hull
Metal Part: Stainless steel net
Photo Etched Parts: 2 pieces
Release Date: 2015-08
HobbyBoss 1:35 - M4 High Speed Tractor
Sold Out
The M4 High Speed Tractor was produced by Allis-Chalmers and started its U.S. military service in 1942. The tractor was meant for tugging heavy weapons and carrying ammunition supplies. It had room for ten crew members and a driver. Its production ended in 1960.
Item No: 82407
Item Name: M4 High Speed Tractor (3in/90mm)
Scale: 1:35
Item Type: Static kit
Model Dimension: Length 144.831mm, Width 75.65mm, Height 82.83mm
Total Plastic Parts: 254 pcs
Total Sprues: 6 sprues, lower hull, cab
Camouflage Scheme: US army in overall green
Photo Etched Parts: 1 piece
Metal Parts: Chain in 100mm length
Film Accessory: Die-cut mask
Release Date: 2007-07
HobbyBoss 1:35 - Land Rover Defender XD Wolf WMIK
Sold Out
The Land Rover Wolf XD (XD stands for Extra Duty) is a British light military vehicle. It was created in 1994 by Land Rover based on the Land Rover Defender. The official designation of the Wolf 90 is TUL HS (Truck Utility Light, High Specification) and the Wolf 110 is designated TUM HS (Truck Utility Medium, High Specification).
WMIK - Weapons Mount Installation Kit - is a variant of TUM used for fire support and reconnaissance. The first WMIK was produced in 1999 by Ricardo Vehicle Engineering under contract to the British Ministry of Defence. The vehicle can be armed in a range of configurations due to the mounts for various weapons systems. WMIK typically carries a 12.7 mm Heavy Machine Gun, a 7.62 mm General Purpose Machine Gun on the rear and another GMPG on the front passenger side.
WMIK's have been used in a number of operations in Iraq and Afghanistan by British forces including the Royal Marines and Paratroopers from the Pathfinder Platoon.
Item No: 82446
Item Name: Defender XD 'Wolf' W.M.I.K.
Scale: 1:35
Item Type: Static kit
Model Dimension: Length 138.2 mm, Width 60.9 mm
Total Plastic Parts: 250+ pcs
Total Sprues: 7 sprues and tyres
Camouflage Scheme: British Army
Photo-Etched Parts: 1 piece
Release Date: 2011-01
Additional:
- The kit consists of over 250 parts
- 15 clear parts included
- Refined detail
- The main tyres are hollow rubber with detailed tread pattern
- Photo-etched parts included
Academy 1:35 German Pz. Kpfw. 35 (t)
Sold Out
Academy 1:35 - German Pz. Kpfw. 35 (t) - Plastic model kit #13280
The Panzerkampfwagen 35(t) was a Czechoslovak-designed light tank used mainly by the Wehrmacht in World War II. The letter (t) stood for tschechisch (German: "Czech"). In Czechoslovak service, it had the formal designation Lehký tank vzor 35 (Light Tank Model 35), but was commonly referred to as the LT vz. 35 or LT-35.
Of the 434 built, the Wehrmacht seized 244 when they occupied Bohemia-Moravia in March 1939 and the Slovaks took over 52 when they declared independence from Czechoslovakia. Others were also sent to Bulgaria and Romania. In German service, the tank saw combat during the early years of World War II, notably the Invasion of Poland, the Battle of France and the invasion of the Soviet Union. They were used for the remainder of the war by other countries and as a training tank in Bulgaria into the 1950s.
Sprue Layout:
- A sprue, upper hull and main hull, with the sides as separate parts.
- B sprue, turret and turret parts, figures, with two heads and separate headgear each.
- C sprue, jerry can racks.
- E sprue, lower hull fittings and track guards.
- F sprue, (2), running gear.
- G sprue, (2), link and length tracks.
- H sprue, (2), attached to the G sprue, jerry cans.
Two vehicles can be built from the kit, one from service in France, and the alternative from the Eastern Front. Both variants are tanks from the 6th Panzer Division that were painted dark grey.
Academy 1:35 German PzKpfw. IV Ausf. H Mid Version
Sold Out
Academy 1:35 - German Panzerkampfwagen IV Ausf. H, Mid Version - Plastic model kit #13516
The German medium tank Panzerkampfwagen IV was developed in the late 1930s and was used extensively during WWII. The production of the Panzer IV Ausf. H started in June 1943. This version was designated the Sd. Kfz. 161/2. Compared to the previous variants, this model had Zimmerit paste on all the vertical surfaces of its armour in order to prevent adhesion of magnetic anti-tank mines. The turret roof was reinforced from 10mm to 16 and 25mm segments. 5mm hull skirts and 8mm turret skirts were added for further protection, which resulted in the elimination of the vision ports on the hull side. Later the hull was also fitted with triangular supports for the easily damaged side skirts. Along with some other modifications, these additions to the design increased the tank's weight to 25 tonnes, and the maximum speed dropped to 16 km/h on cross country terrain.
Details:
- WWII German Army medium tank
- Detailed Ausf. H Mid production version was made in late 1943
- Features 75mm KwK 40/L48 main gun and MG34 machine gun
- Can be assembles with hatches open or closed
- Zimmerit coating decal included
- Flexible rubber tracks
Download instructions for this kit here
Revell 1:35 Sd.Kfz. 184 Tank Hunter "Elefant"
Sold Out
Revell 1:35 - Sd.Kfz. 184 Tank Hunter "Elefant" - Plastic Model Kit #03254
The Elefant was a heavy tank destroyer produced by the Porsche car company in 1943. The initial version was named "Ferdinand" after its designer Ferdinand Porsche.
The Ferdinand was modified after its debut in the Battle of Kursk during which a number of flaws were revealed. The improvements mainly concerned the construction of the tank and its armament. The vehicle was supplemented with a commander's cupola and a layer of front armour. Also, it was additionally armed with a MG 34 machine gun and covered with Zimmerit. The advanced model was renamed "Elefant". Officially it was known as Panzerjäger Tiger (P) or Sd.Kfz. 184.
Today one of these vehicles is on show at the Kubinka Tank Museum in Russia, and another belongs to the United States Army Ordnance Museum. These two tanks are the only samples of the series that survived the war.
Total parts: 238
Skill Level: 4
Appearance date: 01/2017
Includes:
- Easy-to-assemble vinyl tracks
- Elevating gun
- Turret hatches can be mounted in the open or closed position
- Kit contains three figures
- Authentic decal set for following versions:
1st Company of the 653rd Heavy Panzerjäger Battalion, Soriano al Cimino, Italy, 27/06/1944
2nd/3rd Company of the 653rd Heavy Panzerjäger Battalion, Eastern Front, Russia/Poland, 1944
Meng Model 1:35 - US Cougar 6 x 6 MRAP Vehicle
Sold Out
Meng Model 1:35 - US Cougar 6 x 6 MRAP Vehicle - Plastic model kit #SS-005
The Cougar is a wheeled armoured personnel carrier able to withstand land mines and improvised explosive devices (IEDs). It also protects both the crew and engine compartment against various attacks (including small arms fire) and overheating in desert environments.
The Cougar was developed in 2004 due to the urgent demand of the US Marine Corps. Based on South African design of the 1970's, the new vehicle featured the latest advancements of the US military including breakthrough technology in mine-protection.
About four thousand of Cougars were issued under the US MRAP (Mine Resistant Ambush Protected) programme. The carrier is remarkable for its high reliability and safety level resulting in low mortality rate among crew members after IED attacks. The Cougar was widely deployed during the Iraq War and still serves with the armies of the United States, Canada, Poland, Italy and other countries.
Length: 226mm Width: 79mm
Kit details:
- Perfectly reproduced interiors of the cab and troop compartment
- All doors can be built open or closed
- Roof gun mount is rotatable
- Precise Photo Etched parts and two details of paint schemes included
Meng Model 1:35 - Pick Up with Equipment
Sold Out
Meng Model 1:35 - Pick Up with Equipment - Plastic model kit #VS-002
During the Libyan Civil War in 2011 the anti-Gaddafi forces used jeeps and pick-ups in their fight against government troops. This kit represents one of the vehicles popular with the rebels, a Toyota Hilux pick-up truck. It is complemented with a standing figure and two kinds of weapon - a Barrett M82A1 rifle and an M240B machine gun. Drink bottles and other accessories are included. The kit is a great choice for a diorama dedicated to any modern Middle East conflict.
The kit includes parts for one car, one figure, two guns and accessories.
Kit details:
- High percussive 14.5mm heavy machine gun
- Two options for the barrel are included
- Length: 133mm, Width: 57mm, Height: 51mm
Master Box 1:35 - WWII German Military Car Type 170V Tourenwagen w/Crew
Sold Out
Master Box 1:35 - WWII German Military Car Type 170V Tourenwagen w/Crew - Plastic Figure Model Kit #35113
The Tourenwagen 170V was a German inline four cylinder car from the Mercedes-Benz W136 series. Production started in 1936 and a few years later it became the most popular Mercedes vehicle. By 1942, over 75 thousand units were built. The Type 170V held the position of Mercedes top seller till 1953, when it was replaced by more advanced models. During the war, the car was adapted for use in military and rescue service operations.
The kit includes parts for the assembly of a Mercedes 170V and 6 figures.
Master Box 1:35 - German Motorcycle & Sidecar WWII
£19.00 GBP
Master Box 1:35 German Motorcycle & Sidecar WWII - Plastic Figure Model Kit #3528
The kit represents the German BMW R75 motorcycle with a sidecar which can be mounted with either an MG 34 or an MG 42 machine gun. The development of the R75 started in 1938 following a request from the German Army. Initial units were equipped with 750 cc side valve engines, however later they were replaced by new OHV 750 cc engines. The R75 was proved highly manoeuvrable and suitable for off-road conditions. Even today a well-restored vehicle can perform well both on and off-road.
The R75 was deployed by German troops in the USSR and Northern Africa during WWII. It remained in production until 1944 when the Eisenach factory was bombed by the Allied forces. The success of the motorcycle during the war inspired the US military who asked Harley-Davidson to create a similar vehicle for the US Army. So the Harley-Davidson XA was produced, a close copy of the R-75.
The kit contains parts for the assembly of one R-75 motorcycle with a sidecar and a gun. Two gun options are provided: the MG 34 and the MG 42. Glue and paint are not included.
Decal options:
- A Wehrmacht ambulance motorcycle (red crosses are provided)
- 12 SS Panzer, Normandy 1944
- Ramcke Parachute Brigade, Libya and Tunisia 1942-1943
- 14 Fallschirmjager Division, Anzio 1944
- 24 Panzer Division, Stalingrad 1942
- Alternative for 24 Panzer Division, Stalingrad 1942
HobbyBoss 1:35 GMC Bofors 40mm Gun
Sold Out
The U.S. Army cargo truck GMC CCKW was produced from 1941 until 1945 and saw service in the Second World War and the Korean War. The US Army needed a transport vehile that would be easy to manufacture and capable of being transported by the Navy. The GMC - General Motors Truck Company - won the contract in 1941 and by the end of the war over 562 thousand vehicles were produced.
Apart from its function as a transport vehicle, the GMC CCKW was also used for food and ammunition resupply and as a medical evacuation vehicle. The GMC CCKW 353 equipped with the Bofors 40 mm gun was a French version of the vehicle used almost exclusively by the Free French Army. It also saw service in Algeria and Indochina.
Item No: 82459
Item Name: GMC Bofors 40mm Gun
Scale: 1:35
Item Type: Static kit
Model Dimension: Length 219.50 mm, Width 75.00 mm
Total Plastic Parts: 380+
Total Sprues: 13 sprues and poly cap
Photo-Etched Parts: 1 pc
Release Date: 2011-11
Additional:
- The kit consists of over 380 parts
- Includes 8 clear parts
- Details finely represented by newly tooled parts
- Main tyres with very good detail
- Photo-etched parts included
Academy 1:35 Warrior MCV "Iraq 2003"
Sold Out
Academy 1:35 - Warrior MCV "Iraq 2003" - Plastic model kit #13201
The Warrior is a modern infantry combat vehicle of British origin also known as the MCV-80 according to its initial designation. Started in the late 1970s by GKN Sankey, its development was commissioned by the UK Army that sought a replacement for the older FV432 series. The vehicle is aimed to defend the crew from enemy gunfire and to ensure fire-power support during land operations. Its crew includes: driver, gunner, commander and seven soldiers in full gear.
The Warrior carried British troops to the battlefield during the Invasion of Iraq that started in 2003 and marked the beginning of the Iraq War. The Invasion lasted for 21 days and resulted in the overthrow of Saddam Hussein's regime. The campaign against the Iraqi government was conducted by the United States, the United Kingdom, Australia and Poland. Along with the War in Iraq, the Warrior vehicles were used during the Gulf War and the war in Afghanistan.
Academy 1:35 M1A2 Abrams MBT Tusk I/II V2 US Army
Sold Out
Academy 1:35 - M1A2 Abrams MBT Tusk I/II V2 US Army - Plastic model kit #13298
The M1 Abrams is a modern U.S. third-generation main battle tank. It entered service in 1980 to replace the M60. The M1 is the principal main battle tank of the U.S. Army and Marine Corps. It is also widely used by the armies of Egypt, Kuwait, Saudi Arabia, Australia and Iraq. The M1A2 is one of the main versions of the M1 Abrams. Compared to M1A1, it has an improved fire control system, an improved cooling system, and digital maps.
- Current version of U.S. Army M1A2 Tank
- Includes V1, TUSK I, TUSK II with three marking options
- Flexible tracks, CROWS and reactive armour included
- Features armoured gun shield parts of V2, TUSK I, TUSK II
- Contains photo-etched parts and masking seal
Academy 1:35 German Pz. Kpfw. VI Tiger I (Late production version)
Sold Out
Academy 1:35 - German Pz. Kpfw. VI Tiger I Heavy Tank 'Late Version' (Late production version) - Plastic model kit #13314
The Tiger I, a German heavy tank of World War II, was deployed from 1942 in Africa and Europe commonly in independent heavy tank battalions with the designation Panzerkampfwagen VI Tiger Ausf. E often shortened to Tiger. The Tiger I gave the Wehrmacht its first armoured fighting vehicle that used the KwK 36 88-mm gun. In total 1,347 were built between August 1942 and August 1944. Production was over time phased out in favour of the Tiger II.
The Tiger I has been called an excellent design for its time, however it was over-engineered, using expensive materials and labour-intensive production methods. The Tiger was prone to some types of track failures and breakdowns, and had limited range given its high fuel consumption. It was expensive to run, but normally mechanically reliable. It was also difficult to transport, and vulnerable to immobilisation when mud, ice and snow froze between its overlapping and interleaved Schachtellaufwerk-pattern road wheels, often causing them to jam. This was a problem on the Eastern Front in the muddy rasputitsa (semi-annual mud seasons) and winter weather conditions.
The tank was named "Tiger" by Ferdinand Porsche, and the Roman numeral was added after the later Tiger II entered production. The early designation was Panzerkampfwagen VI Ausführung H (‘‘Panzer VI version H’’, abbreviated PzKpfw VI Ausf. H) where 'H' denoted Henschel as the designer/manufacturer. It was given ordnance inventory designation SdKfz 182. The tank was later redesignated as PzKpfw VI Ausf. E in March 1943, with ordnance inventory designation SdKfz 181.
Tigers had a crew of 5. They could travel up to 23mph on roads and were powered by the Maybach 21, 353cc V-12 engines that delivered 642hp.
This rewarding kit provides marking for 10 variants:
- Tiger I, 312, Pz.Abt. 505, Central Russia, 1944
- Tiger I, 007, Pz.Abt. 101, Caen, France, 1944, Michael Wittmann
- Tiger I, 212, Pz.Abt. 101, Normandy, France, 1944, Michael Wittmann
- Tiger I, 221, Pz.Abt. 102, Northern France, 1944
- Tiger I, 313, Pz.Abt. 503, Normandy France, 1944
- Tiger I, 300, Pz.Abt. 505, Central Russia, 1944
- Tiger I, 2, Pz.Abt. 506, Ukraine, 1944
- Tiger I, 3, Pz.Abt. 508, Toscana, Italy, 1944
- Tiger I, 912, 9th SS Pz.Abt., Radzymin, Poland, 1944
- Tiger I, A22, Grossdeutschland Panzer Division, Gumbinnen, Lithuania, 1944
Kit details:
- Detailed suspension
- Hull details including photo-etched engine deck grilles
- Full compliment of pioneering tools and external details
- Separately moulded (not clear) periscopes and guards
- Positionable crew hatches
- Choice of muzzle brake
- Stowage box on rear of turret
- Commander's machine gun on pintle
- Optional crew figure
Academy 1:35 German Panzer IV Ausf. H/J
Sold Out
Academy 1:35 - German Panzer IV Ausf. H/J - Plastic model kit #13234
The Panzerkampfwagen IV was a German medium tank extensively used during WWII.
The production of the Ausf. H, designated the Sd. Kfz. 161/2, started in June 1943. At that time Germany expected that the Allies would use magnetic anti-tank mines in large numbers. This resulted in adding Zimmerit paste to all the vertical surfaces of the Ausf. H's armour to prevent adhesion of the mines.
The glacis armour was manufactured as a single 80mm plate. The turret roof was reinforced from 10mm to 16mm and 25mm segments. Additional 5mm hull skirts and 8mm turret skirts were added to the tank's side and turret for protection. The vehicle's rubber-tired return rollers were replaced with cast steel. In the end the tank's weight increased to 25 tonnes and its top speed dropped to 16 km/h.
The final version of the Panzer IV - the Ausf. J - was greatly simplified in order to speed up the production. Due to the removal of the electric generator which powered the turret traverse, the turret had to be rotated manually. The resulting space was used for the installation of an additional fuel tank. By late 1944, Zimmerit was no longer used on German armoured vehicles, and the tank's side-skirts were replaced by wire mesh.
Academy 1:35 German Jagdpanzer 38(t) Hetzer (Late production version)
Sold Out
Academy 1:35 - German Jagdpanzer 38(t) Hetzer (Late production version) - Plastic model kit #13230
The Jagdpanzer 38 (Sd.Kfz. 138/2), later known as the Hetzer ("pursuer/hunter"), was a German light tank destroyer, based on a modified Czechoslovakian Panzer 38(t) chassis, inspired by the Romanian "Mareşal" tank destroyer.
The Jagdpanzer 38 was a common late-war German tank destroyer. It was produced in relatively large numbers and was for the most part mechanically reliable. The tank first entered service in July 1944. Armed with the 7.5cm PaK 39 L48 main gun with limited traverse and featured sloped armour on its very low profile. An MG34 was mounted to the vehicle roof. It was well liked by crews, fairly reliable and concealable. Drawbacks were that it was very cramped inside the tank, had limited ammo and very thin armour. It was first used in the field in July of 1944 and would go on to serve on both fronts. Approximately 2,800 were built. The name Hetzer was unofficial and used by German troops in the field, then adopted by post war publications.
Due to the large number produced, the Jagdpanzer 38 is probably the most abundant WWII German tank destroyer remaining today.
Academy 1:35 - T-34 747(r) German Version
Sold Out
Academy 1:35 - T-34 747(r) German Version - Plastic Model Kit #13502
Throughout WWII German troops managed to capture a number of Soviet tanks including the T-34, renamed as Panzerkampfwagen T-34 747(r) in German service and modified according to the requirements of the Wehrmacht. Equipped with radio and a German commander's cupola, T-34 747(r) tanks were also marked with a Balkenkreuz or a swastika in order to differentiate them from Soviet T-34's.
Academy 1:35 - M1151 Enhanced Armament Carrier
Sold Out
Academy 1:35 - M1151 Enhanced Armament Carrier - Plastic Model Kit #13415
The M1151 Enhanced Armament Carrier is an enhanced version of the Humvee military light truck. Its development was commissioned by the US Central Command and aimed to replace the Humvee vehicle deployed by the US Armed Forces.
Featuring a heavier chassis and a more powerful diesel engine, the M1151 has applique armour ensuring additional protection of the vehicle. The chassis from the Humvee Expanded Capacity Vehicle allows to carry more passengers and equipment (up to about 1.5 tonnes). The M1151 can be mounted with the Mk 19 grenade launcher, and a number of machine guns including the M2, M60, M240 and M249 models.
Click here to download the kit manual.
Includes:
- 377 total parts
- 335 tan styrene parts
- 16 clear parts
- 10 black styrene parts
- 8 Photo-etched parts
- 8 vinyl keepers
- Decals options
Academy 1:35 German StuG IV Sd.Kfz.167 Early
Sold Out
Academy 1:35 - German StuG IV Sd.Kfz.167 Early - Plastic model kit #13522
The Sturmgeschütz IV, shortened to StuG IV or Sd.Kfz.167, was a German assault gun designed on the basis of the Panzer IV in the last years of the Second World War. The main role of the StuG IV on the battlefield was the same anti-tank role of its predecessor the StuG III. The use of StuG IV guns was a considerable support to the weakening German forces on both fronts.
The StuG IV was practically identical to its predecessor, however it was a bit lighter, which in view of the limited resources was a great advantage. In the period between December 1943 and May 1945 over a thousand StuG IVs were built. The gun was proved effective against both Soviet and Allied tanks.
Details:
- WWII German army assault gun
- Features 7.5cm StuK L/48 gun and MG34 machine gun
- Build with hatches open or closed
- Flexible vinyl/rubber tracks
Decals:
17th SS Panzergrenadier Division 'Goetz von Berlichingen', Normandy, 1944
4th SS Polizei Panzergrenadier Division, Eastern Front, 1944
4th SS Polizei Panzergrenadier Division, Greece, 1944
Sturmgeschutz Brigade, Kurland, 1945, 'Elabeth'
Download instructions for this kit here
Meng Model 1:35 - Sd.Kfz.171 Panther Ausf. D
£45.00 GBP
Meng Model 1:35 - Sd.Kfz.171 Panther Ausf. D - Plastic model kit #TS-038
The Sd.Kfz.171 Panzerkampfwagen V Panther was a German medium tank of the Second World War in service from 1943 until 1945. The tank served alongside the Panzer IV and the Tiger I on the Eastern and Western Fronts in Europe. The Panther Ausf. D was produced from January 1943 until September 1943 with 842 vehicles of this variant built in total.
Kit details:
- External details of the Panther Ausf. D Medium tank are perfectly replicated
- Brand new Panther Ausf. D tracks are included; optional Panther Ausf. D turret detail parts are included
- Detail parts for the Panther Ausf. D's in different units are included
- The main gun travel lock can be built in open or closed position
- PE parts are provided for the commander's cupola
- PE parts are provided for side skirts
- Four typical paint schemes are provided
- Precision PE parts and metal cables are included
Academy 1:35 - M551 Sheridan "Gulf War"
Sold Out
Academy 1:35 - M551 Sheridan "Gulf War" - Plastic Model Kit #13208
The M551 "Sheridan" AR/AAV (Armoured Reconnaissance/Airborne Assault Vehicle) was a light tank developed by the United States military. Designed to be parachuted in and swum across rivers. It was armed with the M81/M81 Modified/M81E1 152mm gun/launcher, which fired conventional ammunition and the MGM-51 Shillelagh guided anti-tank missile.
Click here to download the kit manual.
Includes:
- 470 total parts
- 457 yellow-sand styrene parts
- 12 steel coloured vinyl parts
- 1 nylon screen section
- Decal options
Trumpeter 1:35 Soviet NKL-16 Aerosan Sled
Sold Out
Trumpeter 1:35 - Soviet NKL-16 Aerosan Sled - Plastic model kit #02337
An Aerosan, or Aerosani (Russian: 'аэросани' - 'aerosled') was a Soviet propeller-driven sledge served as a means of transportation and communication in Northern Russia during the Winter War and WWII. The Aerosan was mainly used to deliver mail, transport medical supplies, and carry out border surveillance. Entering service in 1942, the NKL-16 was an improved version of the first combat snowmobiles running on skis. The NKL-16 was deployed throughout the entire war, along with more advanced models.
Item No: 02337
Item Name: Soviet NKL-16 Aerosan Sled
Scale: 1:35
Item Type: Static Kit
Model Dimension: Length 170mm, Width 72mm
Total Parts: 210+
Metal Parts: Brass wire
Photo Etched Parts: 1 piece
Total Sprues: 9 sprues and hull
Release Date: 2013-01
Additional:
- The kit consists of over 210 parts, 1 piece of Photo Etched parts
- Details are finely represented by newly tooled parts
Trumpeter 1:35 JS-7 Soviet Super Heavy Tank
Sold Out
Trumpeter 1:35 - JS-7 Soviet Super Heavy Tank - Plastic model kit #05586
The JS-7 heavy tank, also known as the IS-7, was designed in 1948. With its mass equal to 68 tonnes it was the largest and heaviest specimen of the Joseph Stalin tank series. The JS-7 was distinguished by 130 mm S-70 long-barrel gun and thick armour able to protect against the German Pak 44 L/55. Besides, the JS-7 had a "pike nose" front that ensured a high level of protection against head-on attacks. Due to its 1050-hp engine, the tank could travel at 60 km/h.
Despite all its merits, the JS-7 never entered production; there were fears that railway platforms and bridges couldn't bear its weight.
Item No: 05586
Item Name: JS-7 Soviet Super Heavy Tank
Scale: 1:35
Item Type: Static Armour
Model Dimension: Length 319.8mm, Width 100.2mm
Total Parts: 390+
Metal Parts: Brass wire
Photo Etched Parts: 1 piece
Total Sprues: 12 sprues, upper hull, lower hull and turret
Release Date: 2014-08
Additional:
- The kit with refined detail consists of over 390 parts, 1 piece of Photo Etched parts
- Multi-slide moulded lower hull and turret
© 2026 Panzer Models. Prepared by Article.
