Sold Out
This product is designed for creating natural weathering effects on metal tracks by darkening and rusting the metal. It will work well with most types of metal tracks, especially the Friulmodel tracks. The product is quick and easy to use.
Includes: 1 x 125ml bottle
Instructions:
- Use water and washing up liquid to fully clean and degrease the tracks. After that, make sure the tracks dry thoroughly.
- Wearing protective gloves pour the Burnishing Liquid into a plastic container. The container should be large enough to fully immerse the tracks. Add 100-125 ml of plain tap water and mix thoroughly.
- Put the tracks into the solution and make sure they are fully covered. Use a stiff brush or a toothbrush to help the liquid reach the inner parts of the tracks.
- For using the product on unassembled track links, use two separate smaller containers with sealed lids. Add half a bottle of burnishing liquid and 50ml of water to each container. Put the lid on and shake well to mix.
- Once the desired effect has been achieved you can remove the tracks from the container. Different results can be achieved by by leaving the tracks in the solution for longer/shorter periods (approx. between 7 and 30 minutes).
- As soon as you've taken the tracks out, put them under running water to remove any remains of the product, then fully dry the tracks.
- Now the tracks are ready for applying your desired washes and pigments and sealing them with a matt varnish. You can use a sanding sponge on the raised surfaces to give your tracks a worn bare metal look.
Note: For smaller vehicles you may not need to use the full bottle of Burnishing Liquid. Adjust the amount as necessary.
Check out a full video tutorial here
Sold Out
These reusable wax-based positioning sticks are designed for holding and placing small photo-etch parts or styrene pieces. A great addition to the modeller's tool box.
Instructions:
Sharpen one end of the stick with a pencil sharpener or a blade. Gently touch the photo etch or styrene part with the point of the stick and place it where required on the model. Sharpen the stick again when needed.
Includes: 2 sticks
Sold Out
The Ultimate Primers are water-based acrylics perfect for applying as a base colour on your models. Excellent adhesion and durability. The primers are easy to apply with a brush, an airbrush or a sponge. They can be used on plastic, styrene, resin, metal, wood and other surfaces.
Available options:
UMP027 120ml Primer Grey
UMP028 120ml Primer Black
UMP029 120ml Primer White
UMP033 120ml Primer Oxide
UMP034 120ml Primer Olive
UMP035 120ml Primer Gelb
How to apply:
Shake well before use. The primers do not require thinning. Apply in thin layers leaving to dry for 10 minutes between each layer. Wait for 30 minutes after the last coat and your model will be ready for further painting.
Note: Always make sure to close the cap properly to prevent the product from drying.
Sold Out
These primers are water-based acrylic polyurethane products which serve as a base colour for your models. Excellent adhesion and durability. Easy to apply. The primers can be applied with a brush, an airbrush or a sponge. Suitable for use on plastic, styrene, resin, metal, wood and other surfaces.
Available options:
UMP030 60ml Primer Grey
UMP031 60ml Primer Black
UMP032 60ml Primer White
How to apply:
Shake well before use. The primers do not require thinning. Apply in thin layers leaving to dry for 10 minutes between each layer. Wait for 30 minutes after the last coat and your model will be ready for further painting.
Note: Always make sure to close the cap properly to prevent the product from drying.
Sold Out
These sanders are specially designed for modellers and provide an excellent abrasive solution. Their unique shape allows you to access even small parts and crevices. The sanders are long-lasting and washable.
This Starter Pack includes sanders with different grits: 100/180, 220/220, 400/800, 240/1200, and a buffer (3000/12000).
Sold Out
This weathering Wash is suitable for painting winter camouflage patterns of any kind and creating snowy scenes in dioramas. This is a clay-based product containing several non-toxic ingredients.
View Ultimate Winter Weathering Wash video tutorial here
Includes: 1 x 50 ml bottle
£5.79 GBP
The range of Ultimate Weathering Washes is perfect for adding realism to your models. These washes are clay based and contain several non-toxic ingredients. The range includes six most popular colours.
Please note that after drying the wash becomes slightly lighter than the colour in the bottle. Shake and stir well before use.
Includes:
1 x 50 ml bottle
Available colours:
UMP003 Rust
UMP004 Light Dirt
UMP005 Dark Dirt (NEW FORMULA)
UMP006 Mud
UMP007 Concrete
UMP008 Sand