£5.00 GBP
This high quality acrylic putty is a water based one component polyurethane product designed for modelling. Comes in two variants - extra hard white putty and grey putty of standard hardness. It is a superfine filler with excellent adhesive and sanding properties. The product is water based and does not contain strong smelling chemicals. Does not shrink with drying. Can be cleaned off with water.
Variants:
AK00103 Modelling White Putty - Extra Hard, 20ml/39 gr.
AK00104 Modelling Grey Putty - Standard hardness, 20ml/39 gr.
£2.75 GBP
These practical aluminium pallets are suitable for all kind of paints, thinners and modelling products. Enamels, acrylics, acetone, lacquers, alcohol, and all kinds of thinners can be used without affecting the metal pallet, making it an everlasting tool. The 6 or 10 wells and the central surface will allow you to make a variety of mixtures at the same time, making these pallets a perfect tool for modellers.
Variants:
AK Interactive - Aluminium Palettes (6 Wells)
AK Interactive - Aluminium Palettes (10 Wells)
£4.00 GBP
If you are tired of having your own paint mixes dry out when you could reuse them, AK Interactive has the perfect solution. The new Mix Addict set contains both mixing pots and smaller pots with snap on lids, allowing you to save your favourite mixes a little longer.
Options:
AK00618 Mix Addict Pack Small
AK00619 Mix Addict Pack Medium
£6.00 GBP
This set contains four empty jars with airproof lids, and four blank labels to help your mixes last longer. Modellers often find themselves making customised colours to achieve a desired effect on their models, and when you find the right tone, you might want to preserve it. With the airproof lids you can keep your mixes and reuse them anytime. For easier and more accurate colour mixing it is also recommended to purchase AK Interactive pipettes.
£2.00 GBP
These pipettes are essential for modellers when mixing various paints. Pipettes offer more control when mixing colours instead of just dumping a bottle which is inaccurate and messy. These pipettes are also great for applying pigment fixer and AK Interactive Sand and Gravel Glue. These are just a few of their many uses.
Variants:
AK Interactive - Small Pipettes (Pack of 12)
AK Interactive - Medium Pipettes (Pack of 7)
£6.00 GBP
To make a paint reach its optimum performance, all components should be thoroughly mixed. Stainless steel balls are perfect for use as agitators in any paint including enamels, primers, and acrylics. Add to a pair to your jar and shake to help it mix quicker. It will make your paint work much easier, faster, and more effective. Contains 250 stainless steel balls.
£2.50 GBP
These flat brushes of different sizes are especially useful for painting rust and dirt streaks, fading, and blending. Durable and inexpensive, these brushes are made with synthetic high quality fibers useful for all types of model paints and products.
Available in sizes 2, 4, 6, 8.
Sold Out
Exclusive set of brushes specially designed for weathering. Appropriate for making streak and dust effects, using washes and doing general weathering tasks.
Includes:£2.30 GBP
Round brushes of different sizes are some of the most important tools for every modeller. These brushes are suitable for various kinds of modelling tasks, including painting small details. AK Interactive brushes are made with high quality long lasting synthetic fibers.
Available in sizes 1, 2, 4, 6, 8, 2/0, 3/0, and 5/0.
£22.50 GBP
New product offer! For a limited time only any purchases of this item will receive a free AK Interactive brush.
An oak veneered wooden desktop accessory for holding your paint brushes. This product can be used to hold brushes upright to keep bristles safe or facing down to soak into trays of water for proper cleaning. This kit includes closed cell foam and 7 wooden components, easily assembled with a click together design.
Fits most common sizes and has 12 slots (brushes can be doubled up in each slot if required), however for especially large handle brushes please contact us.
Note: requires some assembly
Sold Out
Meng Model 1:35 Basic Hobby Tool Kit - Tool Kit #MTS-003
When building a model, it is important to have easy-to-use tools at hand. Especially designed for beginners, this set includes four instruments, all useful when dealing with tiny, delicate parts. Kit includes a pair of side cutters, a hobby knife with 12 spare blades, a flat file and tweezers. A leather bag for safe storage and transportation of the tools is also provided.
Includes:
- 1 x MTS-006 Basic side cutters suitable for cutting plastic parts, runners and brass rods up to 0.7mm in diameter
- 1 x MTS-007 Basic hobby knife with a metal slot for a 30 degree angle blade, useful for removing plastic flesh and small parts
- 1 x MTS-008 Basic flat file with a 50mm filing area
- 1 x MTS-009 Stainless Steel Tweezers for holding small details
- 1 x Leather carrying bag
- 12 x Spare blades for the hobby knife
Sold Out
Meng Model 1:35 Modelling Paint Brush Set - Tool Kit #MTS-010
This set includes five modelling paint brushes with wooden body, nylon bristles, and copper ferrules coated with silver. Suitable for both acrylic and oil-based paints. Each brush has its own plastic cap.
Includes:
- MTS-011 - Pointed brush for painting details
Length: 160 mm
Maximum diameter: 4.4 mm
Bristle length: 6 mm
Bristle diameter: 1.15 mm
- MTS-012 - Pointed brush for painting details
Length: 160 mm
Maximum diameter: 4.4 mm
Bristle length: 6 mm
Bristle diameter: 1.79 mm
- MTS-013 - Flat brush for painting large areas and corners
Length: 160 mm
Maximum diameter: 5.15 mm
Bristle length: 13 mm
Bristle diameter: 3.10 mm
- MTS-014 - Pointed brush for painting details and small areas
Length: 160 mm
Maximum diameter: 5 mm
Bristle length: 10 mm
Bristle diameter: 2.94 mm
- MTS-015 - Flat brush for painting large areas
Length: 160 mm
Maximum diameter: 5.8 mm
Bristle length: 10 mm
Bristle diameter: 5.9 mm
£5.48 GBP
Milliput Black - 113g Stick - G-MP805
This Black epoxy putty is at first soft and highly adhesive and then gradually hardens. The speed of hardening depends on temperature and at normal temperatures (20-25°C) Milliput becomes rock hard in three to four hours. With the application of heat the setting time can be reduced. After setting hard Milliput continues to cure and is fully cured after an elapse of time equal to the setting time at the same temperature. Once fully cured Milliput can be tapped, filed and painted. Milliput will set under water and is heat resistant up to 130°C.
Mix together equal parts of each stick from the pack. Knead and roll in the hands for at least 5 minutes until the colours merge and become uniform and no streaks can be seen, and then mix for another minute. The surfaces to which the putty is applied should be free from grease and dirt. Smooth surfaces should be cleaned with a suitable solvent or with soap and warm water to remove dirt and grease. Abrading the surface will improve adhesion. The putty may now be applied and will set hard in three to four hours without shrinking.
£5.48 GBP
Milliput Silver Grey - 113g Stick - G-MP802
This Silver Grey epoxy putty is at first soft and highly adhesive and then gradually hardens. The speed of hardening depends on temperature and at normal temperatures (20-25°C) Milliput becomes rock hard in three to four hours. With the application of heat the setting time can be reduced. After setting hard Milliput continues to cure and is fully cured after an elapse of time equal to the setting time at the same temperature. Once fully cured Milliput can be tapped, filed and painted. Milliput will set under water and is heat resistant up to 130°C.
Mix together equal parts of each stick from the pack. Knead and roll in the hands for at least 5 minutes until the colours merge and become uniform and no streaks can be seen, and then mix for another minute. The surfaces to which the putty is applied should be free from grease and dirt. Smooth surfaces should be cleaned with a suitable solvent or with soap and warm water to remove dirt and grease. Abrading the surface will improve adhesion. The putty may now be applied and will set hard in three to four hours without shrinking.
£3.00 GBP
Milliput Standard - 113g Stick - G-MP805
The Milliput Standard epoxy putty is at first soft and highly adhesive and then gradually hardens. The speed of hardening depends on temperature and at normal temperatures (20-25°C) Milliput becomes rock hard in three to four hours. With the application of heat the setting time can be reduced. After setting hard Milliput continues to cure and is fully cured after an elapse of time equal to the setting time at the same temperature. Once fully cured Milliput can be tapped, filed and painted. Milliput will set under water and is heat resistant up to 130°C.
Mix together equal parts of each stick from the pack. Knead and roll in the hands for at least 5 minutes until the colours merge and become uniform and no streaks can be seen, and then mix for another minute. The surfaces to which the putty is applied should be free from grease and dirt. Smooth surfaces should be cleaned with a suitable solvent or with soap and warm water to remove dirt and grease. Abrading the surface will improve adhesion. The putty may now be applied and will set hard in three to four hours without shrinking.
>>> To truly smooth out your Milliput, apply Methylated Spirits with an old brush, the putty can also be thinned to a paint like consistency in this way for use filling or covering very light cracks. <<<
£5.48 GBP
Milliput Superfine White - 113g Stick - G-MP803
This Superfine White epoxy putty is at first soft and highly adhesive and then gradually hardens. The speed of hardening depends on temperature and at normal temperatures (20-25°C) Milliput becomes rock hard in three to four hours. With the application of heat the setting time can be reduced. After setting hard Milliput continues to cure and is fully cured after an elapse of time equal to the setting time at the same temperature. Once fully cured Milliput can be tapped, filed and painted. Milliput will set under water and is heat resistant up to 130°C.
Mix together equal parts of each stick from the pack. Knead and roll in the hands for at least 5 minutes until the colours merge and become uniform and no streaks can be seen, and then mix for another minute. The surfaces to which the putty is applied should be free from grease and dirt. Smooth surfaces should be cleaned with a suitable solvent or with soap and warm water to remove dirt and grease. Abrading the surface will improve adhesion. The putty may now be applied and will set hard in three to four hours without shrinking.
£5.00 GBP
Milliput Terracotta - 113g Stick - G-MP804
This Terracotta epoxy putty is at first soft and highly adhesive and then gradually hardens. The speed of hardening depends on temperature and at normal temperatures (20-25°C) Milliput becomes rock hard in three to four hours. With the application of heat the setting time can be reduced. After setting hard Milliput continues to cure and is fully cured after an elapse of time equal to the setting time at the same temperature. Once fully cured Milliput can be tapped, filed and painted. Milliput will set under water and is heat resistant up to 130°C.
Mix together equal parts of each stick from the pack. Knead and roll in the hands for at least 5 minutes until the colours merge and become uniform and no streaks can be seen, and then mix for another minute. The surfaces to which the putty is applied should be free from grease and dirt. Smooth surfaces should be cleaned with a suitable solvent or with soap and warm water to remove dirt and grease. Abrading the surface will improve adhesion. The putty may now be applied and will set hard in three to four hours without shrinking.
>>> To truly smooth out your Milliput, apply Methylated Spirits with an old brush, the putty can also be thinned to a paint like consistency in this way for use filling or covering very light cracks. <<<
£2.75 GBP
Modelcraft - Cutting Mats
3 layer PVC mat with sandwich structure ensures no cracking or warping. Non slip surface of the base holds paper firmly and prevents blade run and cutting errors.
Preserves the life of blades and encourages accurate cutting.
Variants:
A2 - 600 x 450mm
A3 - 450 x 300mm
A4 - 300 x 200mm
A5 - 230 x 160mm
A6 - 105 x 148mm
Sold Out
Ideal for mixing paint with thinners for airbrushing, these glass droppers have a rubber cap and fit into a vial for safe keeping. The glass pipette is tapered. The vial also avoids the issue of where to put the droppers after use and helps with keeping them clean. Overall size is very similar to a Vallejo paint pot, which means they fit in standard paint holders/stands.
Vial Volume: 10-12ML
7.2mm Pipette Volume: 10 ML/45UL
Dimensions:
Height: 58.5MM
Diameter: 22MM
£32.50 GBP
A very useful multi-paint rack that can hold paints from many brands, see below for details. Made from clear acrylic plastic, this requires assembly with 4 screws (Small Screwdriver is needed). Perfect for organising your hobby desk.
Citadel (Games Workshop) pots - 60
Vallejo eye dropper bottles - 80
Tamiya glass jars (Mini) - 55
This item is shipped out flat packed.
Dimensions: 42.5 x 20 x 19 cm
Paints not included
Sold Out
Revell Glues - Contacta Professional 25g Needle - RV39604
Revell Contacta Professional is designed for pin-point accurate bonding. The extra-fine hollow needle allows for micro-fine glueing of tiny details and clear part edges.
£4.00 GBP
Revell Glues - Plasto Body Putty - RV39607
Modelling mistakes, joins and cracks can be touched up and concealed using Revel Plasto putty. Once dry, the surface needs to be smoothed down.
Sold Out
Revell Tools - Hand Drill will three drill bits - RV39064
This hand drill from Revell is a useful modelling tool that can be used for drilling holes in plastic and resin models. Hand drills are easy to control; they are perfect for plastic models whereas motorised drills may melt through the plastic instead of drilling.
Includes: Hand drill with three drill bits - 0.7 mm, 1.0 mm, 1.3 mm
Sold Out
A very useful and cost effective Birch Leaf maker - Product code: RP-BIR
Includes maker for Birch leaves in four different sizes.
Scale: 1/48, 1/35, 1/24, 1/16
Figure scale: 30mm, 54mm, 75mm, 90mm
Use dry leaves for best results.
Sold Out
A very useful and cost effective Leaf maker set - Product code: RP-LEFS
Includes makers for Birch, Lime, Maple, Oak in four different sizes.
Scale: 1/48, 1/35, 1/24, 1/16
Figure scale: 30mm, 54mm, 75mm, 90mm
Use dry leaves for best results.
Sold Out
A very useful and cost effective Lime Leaf maker - Product code: RP-LIM
Includes maker for Lime Tree leaves in four different sizes.
Scale: 1/48, 1/35, 1/24, 1/16
Figure scale: 30mm, 54mm, 75mm, 90mm
Use dry leaves for best results.
Sold Out
A very useful and cost effective Maple Leaf maker - Product code: RP-MAP
Includes maker for Maple leaves in four different sizes.
Scale: 1/48, 1/35, 1/24, 1/16
Figure scale: 30mm, 54mm, 75mm, 90mm
Use dry leaves for best results.
Sold Out
A very useful and cost effective Oak Leaf maker - Product code: RP-OAK
Includes maker for Oak leaves in four different sizes.
Scale: 1/48, 1/35, 1/24, 1/16
Figure scale: 30mm, 54mm, 75mm, 90mm
Use dry leaves for best results.
Sold Out
Tamiya Extra Thin Cement 40ml - 87038
The Tamiya Extra Thin Cement 40ml is generally known as the best adhesive to glue together models that use polystyrene plastic (most model kits). The extra thin formula allows the modeller to glue together small pieces that require pin point accuracy and finesse using the fine brush included - instead of having the glue splashing about in unwanted areas causing damage.
£45.00 GBP
Made by hand and entirely in the UK, we have used waterproof waxed canvas fabric from a British Mill, vegetable tanned leather trim, brass hardware, mil-spec rot and UV resistant webbing and thread, plus mil-spec binding along the edge of the roll. Marked PM 1942, PM for Panzer Models and 1942 in homage to the equipment of the period.
The tool roll is designed to hold all the accessories that you need for your work, such as pliers, files, a modelling knife, brushes etc. It has 11 pockets of different sizes which makes it versatile and convenient. The pocket sizes perfectly fit standard modelling tools and have been designed and tested for this purpose.
Please note: these are made by hand to order, we hold limited stock and you should expect to receive your tool roll within 2 weeks from ordering.
Designed and hand made by Panzer Models UK. Tools pictured not included, we will be offering a tool roll with a full set of tools soon.
Dimensions: 40cm x 24cm
£7.00 GBP
Trumpeter 1:35 Model Clamp - Modelling tool kit #09914
This tool is used for clamping parts in place for painting, gluing and drying. This is an unassembled plastic kit. Includes two mouth options: a teeth mouth and a flat mouth.
Item No: 09914
Item Name: Model Clamp
Item Type: Model Accessories
Metal Parts: 2 springs
Total Sprues: 1 sprue and 2 O-shape rubber rings
Release Date: 2010-07
£9.00 GBP
Trumpeter 1:35 Modelling Brushes (7 pieces set) - Modelling tool kit #09900
This set contains four flat brushes for large areas and three pointed brushes for extremely fine details.
Item No: 09900
Item Name: Modeling brushes
Item Type: Modeling Tools
Includes 7 pieces.
Sold Out
These reusable wax-based positioning sticks are designed for holding and placing small photo-etch parts or styrene pieces. A great addition to the modeller's tool box.
Instructions:
Sharpen one end of the stick with a pencil sharpener or a blade. Gently touch the photo etch or styrene part with the point of the stick and place it where required on the model. Sharpen the stick again when needed.
Includes: 2 sticks
Sold Out
These sanders are specially designed for modellers and provide an excellent abrasive solution. Their unique shape allows you to access even small parts and crevices. The sanders are long-lasting and washable.
This Starter Pack includes sanders with different grits: 100/180, 220/220, 400/800, 240/1200, and a buffer (3000/12000).
£17.50 GBP
This paint stand for storing Vallejo paints is easy to assemble and does not require glue. The stand allows you to store the following items:
28 x 17 ml bottles
16 x 35 ml or 60 ml bottles
1 x 200 ml bottle
26 x paint brushes
Dimensions:
Length - 27cm
Width - 27 cm
Height - 11 cm
Front module is available here
£17.00 GBP
An easy to assemble paint stand for storing Vallejo paints. This stand allows you to store the following items:
52 x 17 ml bottles
8 x 35 ml or 60 ml bottles
22 x paint brushes
Does not require glue.
Dimensions:
Length - 34 cm
Width - 22.3 cm
Height - 11cm
Corner module is available here
£17.50 GBP
A wall mounted paint stand for storing 17ml Vallejo paints. Easy to assemble and does not require glue.
The stand allows you to store the following items:
43 x 17 ml bottles
Dimensions:
Depth - 5.2 cm
Width - 39 cm
Height - 31 cm
£12.00 GBP
Vallejo Acrylics - Airbrush Cleaning Pot
Airbrush cleaning pot, glass with plastic lid, used to spray-clean airbrush. The airbrush is inserted into the opening of the plastic lid and is cleaned by spraying Vallejo Airbrush Cleaner VAL099, VAL199 or water into the container.
£11.50 GBP
Vallejo Water Effects - Mediterranean Blue 200ml VAL 26202
Vallejo Mediterranean Blue is a thick semitransparent gel reproducing the colour of the Mediterranean Sea. It is perfectly suited for creating realistic water effects for dioramas. To deepen the end colour it is advised to paint the base with a darker shade before using the gel. Drying time is about 24 hours depending on the thickness of the layer applied.
Includes: 1 x 200 ml bottle
VAL26202 Mediterranean Blue
£5.50 GBP
Vallejo Water Effects - Still Water
This product is designed to create the effect of transparent still water. It can be perfectly used on both plane and irregular surfaces. It is recommended to apply several layers of the product and to keep each layer not more than 3 mm thick in order to avoid bubbling or cracking on the surface while it dries.
VAL 26.235 Still Water, 30ml
VAL 26.230 Still Water, 200ml
Diorama Effects is not flammable, and does not contain solvents. Please see also certified safety information of the product on the Safety page.