Miniart
Miniart 1:35 - Anti-tank Obstacles
£11.00 GBP
Miniart 1:35 - Anti-tank Obstacles - Plastic model kit #35579
The hedgehogs, or Czech hedgehogs, originated in Czechoslovakia and were first used on the country's border with Germany prior to the Munich Agreement and Germany's occupation of the Sudetenland. During WWII these anti-tank obstacles were widely used by the Soviet Union and proved to be especially effective in urban areas to block streets. Germany also used the hedgehogs as part of its defenses of the Atlantic Wall.
The Czech hedgehogs were normally made from sturdy metal, however the Soviet Union sometimes even used wood for this purpose. The obstacles were up to 1.4m high and consisted of 3 pieces of metal angle joined by gusset plates, rivets and bolts.
This kit contains parts for the assembly of 12 models of anti-tank obstacles.
Download instructions for this kit here
The kit contains 36 parts.
Box: 260mm x 162mm x 35mm
Miniart 1:35 - Champagne and Cognac Bottles with Crates
Sold Out
Miniart 1:35 - Champagne and Cognac Bottles with Crates - Plastic model kit #35575
This is an unassembled plastic model kit containing parts for the assembly of champagne and cognac bottles and crates.
The kit contains 276 parts.
Box: 260mm x 162mm x 35mm
Miniart 1:35 - European Barn
Sold Out
Miniart 1:35 - European Barn - Plastic model kit #35534
This kit contains unassembled and unpainted model of European Barn.
Contains 119 parts.
Box: 345 x 240 x 60 mm
Glue and paint are not included.
Download instructions for this kit here
Miniart 1:35 - European Tram Car with Crew and Passengers
Sold Out
Miniart 1:35 - European Tram Car with Crew and Passengers - Plastic model kit #38009
This is an unassembled plastic model kit containing a model of a European tram with tram supports, a crew with passengers, street accessories and a base.
The kit contains 810 parts.
Box: 345mm x 240mm x 100mm
Miniart 1:35 - Farm Entrance with Wall
Sold Out
Miniart 1:35 - Farm Entrance with Wall - Plastic model kit #35535
This kit includes parts for the assembly of a ruined wall with a gate and a door.
The kit contains 26 parts.
Box: 345mm x 240mm x 60mm
Glue and paint are not included.
You can download instruction sheets here.
Miniart 1:35 - Norman Street
Sold Out
Miniart 1:35 - Norman Street - Plastic model kit #36045
This kit includes a diorama base with two buildings and street accessories. A variety of WWII French signs and posters is included.
Contains 138 parts.
Box: 380mm x 280mm x 60mm
Glue and paint are not included.
Download instructions for this kit here
Miniart 1:35 - Pz.Kpfw III/IV Early Type Track Links
Sold Out
Miniart 1:35 - Pz.Kpfw III/IV Early Type Track Links - Plastic model kit #35235
These workable track links are suitable for the following tank models:
Pz.Kpfw. III Ausf.A
Pz.Kpfw. III Ausf.B
Pz.Kpfw. III Ausf.C
Pz.Kpfw. III Ausf.D
(Each track link contains 96-98 tracks)
Stug III Ausf.A
Pz.Kpfw. III Ausf.E
Pz.Kpfw. III Ausf.F
(Each track link contains 94 tracks)
Pz.Kpfw. IV Ausf.A
Pz.Kpfw. IV Ausf.B
Pz.Kpfw. IV Ausf.C
Pz.Kpfw. IV Ausf.D
Pz.Kpfw. IV Ausf.E
(Each track link contains 101 tracks)
The kit contains 721 parts for the assembly of Pz.Kpfw III/IV track links.
Box: 260mm x 162mm x 35mm
Miniart 1:35 - Railway Track European Gauge
Sold Out
Miniart 1:35 - Railway Track European Gauge - Plastic model kit #35561
This is an unassembled plastic model kit containing railway tracks with a standard gauge used in Europe.
The kit contains 136 parts.
Model Dimensions: Length 686mm
Box: 290mm x 190mm x 45mm
Miniart 1:35 - Railway Track with Dead End, European Gauge
Sold Out
Miniart 1:35 - Railway Track with Dead End, European Gauge - Plastic model kit #35568
This is an unassembled plastic model kit containing a railway track with a standard gauge used in Europe, and a railway dead end sign.
The kit contains 90 parts.
Model Dimensions: Length 342mm
Box: 290mm x 190mm x 45mm
Miniart 1:35 - Shed with Wooden Fence
Sold Out
Miniart 1:35 - Shed with Wooden Fence - Plastic model kit #35556
This kit from the Miniart Buildings and Accessories series contains parts for the assembly of a shed, a wooden fence, a ladder and a wooden table with benches.
The kit contains 235 parts.
Box: 345mm x 240mm x 80mm
Glue and paint are not included.
Download instruction sheets here.
Miniart 1:35 - Street Lamps & Clocks
Sold Out
Miniart 1:35 - Street Lamps & Clocks - Plastic model kit #35560
This is an unassembled plastic kit containing European street lamps and clocks.
Includes:
- Two street lamps on posts
- One clock on a post
- Additional clock without a post
- Additional lamp without a post
The kit contains 93 parts including clear parts.
Decals for clock dials are provided.
Box: 260mm x 162mm x 35mm
Glue and paint are not included.
You can download instruction sheets here.
Miniart 1:35 - Village Diorama with Fountain
Sold Out
Miniart 1:35 - Village Diorama with Fountain - Plastic model kit #36028
This is an unassembled diorama base containing part of a ruined village house and a fountain. Foliage/scatter not included.
The kit contains 73 parts.
Box: 345mm x 240mm x 60mm
Glue and paint are not included.
You can download instruction sheets here.
Miniart 1:35 - British Armoured Car Crew
Sold Out
Miniart 1:35 - British Armoured Car Crew - Plastic Figure Model Kit #35069
This kit represent five members of a British armoured car crew. Two of them (the commander and the driver) are dressed in British denim tank suits and suitable for dioramas set in Italy or Northwestern Europe during WWII. The commander has a Ruger MK II pistol holster and a pair of ear phones. The driver also is carrying a pistol holster as well as an ammo pouch. His arms are positioned to hold a steering wheel of the Mk III Dingo scout car.
The other three figures can be used with the Dingo Mk.Ib car in dioramas dedicated to the North African or Italian campaigns. The officer is equipped with a pistol holster, small ammo pouch, binoculars, binocular case, haversack and water bottle. The sitting crewman and another vehicle's commander each have a pistol holster and a small ammo pouch. All three crew-members are wearing British Khaki drill uniforms. The goggles depicted in the box image are not included.
The kit contains 44 parts.
Includes parts for five figures and accessories.
Box: 260mm x 162mm x 35mm
Miniart 1:35 - British Bags, Rucksacks & Canvas WWII
Sold Out
Miniart 1:35 - British Bags, Rucksacks & Canvas WWII - Plastic model kit #35599
This kit includes finely detailed rucksacks, folded canvas and bags. They accurately replicate those used by British infantry and armoured troops in WWII.
Box: 260mm x 162mm x 35mm
Miniart 1:35 - British Jeep Crew
Sold Out
Miniart 1:35 - British Jeep Crew - Plastic Figure Model Kit #35051
The kit contains 46 parts.
Includes parts for five figures.
Box: 260mm x 162mm x 35mm
Miniart 1:35 - British Royal Engineers
Sold Out
Miniart 1:35 - British Royal Engineers - Plastic Figure Model Kit #35083
The kit represents four British sappers, all searching for mines. The figures are complemented with mine searching equipment including an MK III Polish mine detector, a mine prod and digging tools. A small sign board on a post and a two-part mine are also provided. Two figures are armed with No.4 rifles.
The kit contains 66 parts.
Includes parts for four figures and accessories.
Box: 260mm x 162mm x 35mm
Miniart 1:35 - British Soldiers Tank Riders
Sold Out
Miniart 1:35 - British Soldiers Tank Riders - Plastic Figure Model Kit #35071
This kit includes parts for the assembly of five British tank crew members - a commander and four tankmen. All soldiers are wearing the Khaki Drill uniforms - shorts and shirts, and steel helmets.
The kit contains 75 parts.
Includes parts for five figures.
Box: 260mm x 162mm x 35mm
Miniart 1:35 - British Tank Riders (NW Europe) Special Edition
Sold Out
Miniart 1:35 - British Tank Riders (NW Europe) - Plastic Figure Model Kit #35312
This kit consists of five British soldiers wearing standard British battle dress and sitting in typical positions for tank riders.
The kit contains 71 parts.
Includes parts for five figures.
Box: 260mm x 162mm x 35mm
Miniart 1:35 - Bundeswehr Tank Crew
Sold Out
Miniart 1:35 - Bundeswehr Tank Crew - Plastic Figure Model Kit #37032
This kit includes five figures of German tank crew members and can be a good addition to a diorama featuring modern German tanks.
Download instructions for this kit here
The kit contains 56 parts.
Includes parts for five figures.
Box: 260mm x 162mm x 35mm
Miniart 1:35 - Cafe Furniture and Crockery
Sold Out
Miniart 1:35 - Cafe Furniture and Crockery - Plastic Figure Model Kit #35569
This kit provides furniture and accessories for an outdoor cafe setting. It contains two tables, four chairs, three cups, four glasses and two wine bottles. A decal sheet with two options for the awning is included.
The kit contains 50 parts.
Box: 260mm x 162mm x 35mm
Miniart 1:35 - Close Combat US Tank Crew
Sold Out
Miniart 1:35 - Close Combat US Tank Crew - Plastic Figure Model Kit #35135
The kit represents five American tankmen defending themselves in close combat. All figures are depicted in true-to-life dynamic poses. Three crew-members are armed with M3 .45-caliber submachine guns, one tanker has a .45-caliber pistol, and the last one is firing the commander's M2HB machine gun. Helmets and goggles are included.
The kit contains 62 parts.
Includes parts for five figures.
Box: 260mm x 162mm x 35mm
Miniart 1:35 - Cross Roads Diorama Base
Sold Out
Miniart 1:35 - Cross Roads Diorama Base - Plastic model kit #36013
The Cross Roads Diorama Base represents two half-ruined buildings modelled neatly and in great detail by means of vacuum forming. Among other parts the kit contains a sheet of colourful road signs.
This kit contains 201 parts.
Model Dimension: Length 430mm, Width 300mm
Box: 345mm x 240mm x 90mm
Miniart 1:35 - Diorama with Ruins
Sold Out
Miniart 1:35 - Diorama with Ruins - Plastic model kit #36039
This is an unassembled plastic model kit containing a diorama base and ruins.
The kit contains 35 parts.
Model Dimensions: Length 238mm, Width 170mm
Box: 345mm x 240mm x 60mm
Miniart 1:35 - Farm Cart
Sold Out
Miniart 1:35 - Farm Cart - Plastic model kit #35542
This is an unassembled plastic model kit containing a wooden farm cart. The kit is useful for depicting WWII period European civilian scenes in the countryside or city-dwellers escaping war zones.
The kit includes 19 parts for the assembly of one farm cart. Figures, glue and paint are not included.
Box: 290mm x 190mm x 45mm
Miniart 1:35 - Finnish Tank Crew
£11.00 GBP
Miniart 1:35 - Finnish Tank Crew - Plastic Figure Model Kit #35222
During the Second World War, the Finnish army participated in three major conflicts - the Winter War in 1939-1940 which began with the invasion of Finland by the Soviet Union, the Continuation War between Finland and the Soviet Union which started just over a year after the Winter War and lasted until 1944, and the Lapland War between Finland and Germany from September 1944 until April 1945.
This kit includes five figures of Finnish tank crew members of the WWII period.
Download instructions for this kit here
The kit contains 50 parts.
Includes parts for five figures.
Box: 260mm x 162mm x 35mm
Miniart 1:35 - French Street Diorama
Sold Out
Miniart 1:35 - French Street Diorama - Plastic model kit #36006
This detailed kit represents a French street with two ruined buildings. Among other parts the kit contains various signs that were common for the streets of France during WWII.
This kit contains 245 parts.
Model Dimension: Length 334mm, Width 252mm
Box: 380mm x 280mm x 110mm
Miniart 1:35 - GAZ-AAA With Shelter
£43.00 GBP
Miniart 1:35 - GAZ-AAA With Shelter - Plastic Figure Model Kit #35183
In 1932, under the agreement with the Ford Motor Company a Soviet automobile-manufacturing plant located in Nizhny Novgorod developed its first two vehicles - Ford Model A and Ford Model AA. They were sold as NAZ-A and NAZ-AA respectively. In 1933, the plant was renamed from NAZ (Nizhegorodsky Avtomobilny Zavod, 'Nizhny Novgorod Automobile Plant') to GAZ (Gorkovsky Avtomobilny Zavod, 'Gorky Automobile Plant'). The vehicles' names were then changed to GAZ-A and GAZ-AA.
The 3-axle GAZ-AAA 6x4 truck was a successor of the 2-axle GAZ-AA. Its production ran from 1934 until 1943. Compared to the GAZ-AA, this vehicle was slightly slower and heavier, but its load capacity increased from 1.5 to 2 tons.
The kit contains 341 parts.
Box: 345mm x 240mm x 70mm
Additional:
- Highly detailed model
- Total details 341
- 314 plastic parts
- 20 photo-etched parts
- 7 clear plastic parts
- Decals included
- Full colour instructions
- Highly detailed chassis
- Engine is accurately represented
- Authentic wooden texture
- All doors can be assembled open or closed
Download instructions for this kit here
Miniart 1:35 - German Artillery Crew (Special Edition)
Sold Out
Miniart 1:35 - German Artillery Crew (Special Edition) - Plastic Figure Model Kit #35192
The kit represents five members of a German artillery crew. This can be a great addition to a diorama featuring the German Field Gun FK39 (r) 7.62cm.
The kit contains 188 parts.
Includes parts for five figures and four ammunition boxes with shells.
Box: 260mm x 162mm x 35mm
The ammunition includes:
- 8 x 76mm UOF 354M HE-Fragmentation shells
- 8 x 76mm UBR-354P with the armour-piercing sub-calibre projectile BR-240P
- 8 x Solid Shot UBR-271K with 57mm AP-T shells
- 8 x used cartridges for the shells
Miniart 1:35 - German artillery crew riders
Sold Out
Miniart 1:35 - German artillery crew riders - Plastic Figure Model Kit #35040
The kit represents four German artillery crew and a driver, all seated in relaxed poses and clothed in standard German Grey-Green uniforms. The driver's position fits any artillery vehicle as well as a tank or armoured car which makes it possible to use the kit in various settings.
The kit contains 63 parts.
Includes parts for five figures, painting instructions and a paint conversion chart.
Box: 260mm x 162mm x 35mm
Miniart 1:35 - German Cargo Truck L 1500 S
£38.00 GBP
Miniart 1:35 - German Cargo Truck L 1500 S - Plastic Figure Model Kit #38014
The L 1500 was a German light truck produced by Daimler-Benz AG from 1941 to 1944. This model was available in two variants: the rear-wheel-drive model L 1500 S and the all-wheel-drive model L 1500 A. In total over 4,000 L 1500 S's were built, with over 3,000 of them designed as light fire-fighting vehicles.
The L 1500 S was a two-axle truck featuring the R6 Otto-motor engine (44 kW). The power was transmitted via a manual transmission. The wheels had 190-20 tires with drum brakes. In general, the vehicles were aimed at civil use often serving as flatbed and cargo trucks.
The kit contains 688 parts. Includes a model of the The L 1500 S truck, wooden barrels, milk cans, milk and beer bottles with crates and a sheet of decal for 8 options.
Box: 345mm x 240mm x 60mm
Decal options:
- Civil Alpen-Milch 1205-OE3 Saarbrücken 1950
- Civil Milch IB 56-52 West Berlin 1950
- Civil Deutsche Reichspost RP-36022 1941
- Civil Deutsche Post DP 27-457 1950
- Civil Dressler Bier AE 29-2604 American occupation zone, Bremen | 1947
- Civil Grobwascherei IE-351342
- Civil Karl Ostermann Transporte tel:326 30-3062
- Civil 14 Engelhardt IB 32-60
Miniart 1:35 - German Civilians
Sold Out
Miniart 1:35 - German Civilians - Plastic Figure Model Kit #38015
The kit includes five German civilians of WWII (a young woman in a plaid coat, an older woman with a cane, a middle-aged man wearing a suit and one Hitlerjugend boy) as well as one Nazi policeman from the Ordnungspolizei (Order Police). The figure of the old woman is based upon a photo of a real German woman. The photo was published in several books and magazines dedicated to World War II. The figures can be used in a variety of dioramas depicting life in Western Europe during wartime.
The kit contains 47 parts.
Includes parts for five figures.
Box: 290mm x 190mm x 45mm
Miniart 1:35 - German Feldgendarmerie Special Edition
£12.00 GBP
Miniart 1:35 - German Feldgendarmerie Special Edition - Plastic Figure Model Kit #35315
The Feldgendarmerie were military police units formed in the Napoleonic era by the armies of several German kingdoms - Saxony, Württemberg, Prussian and Bavaria - which later became parts of the German Empire. In peacetime the units served with the Prussian Gendarmerie as a mounted police.
Dissolved after the First World War, the Feldgendarmerie were reintroduced in 1933 when Hitler seized power. Personnel were trained in a special military school in Potsdam. Due to strict training conditions and high demands placed on the candidates, only a small number of soldiers managed to graduate and join the force.
Staying behind the theatre of operations during WWII, the Feldgendarmerie closely worked with the Geheime Feldpolizei (Secret Field Police) and SS in the rear. Their duties were to monitor traffic and population control, fight with partisans as well as arrest and execute rebellions. According to some historians, the Feldgendarmerie soldiers were also involved in war crimes and Jewish purges in occupied territories.
In the period between 1943 and 1945 the Feldgendarmerie were infamously known for chasing and executing deserters, many of which were wrongfully convicted. This gave the units a bad name "Kettenhunde" or "Chained Dogs" after the gorget they wore with their uniforms.
The kit contains 71 parts.
Includes parts for five figures, equipment and road signs.
Box: 260mm x 162mm x 35mm
Miniart 1:35 - German Paratroopers and Tankers (Italy 1943)
Sold Out
Miniart 1:35 - German Paratroopers and Tankers (Italy 1943) - Plastic Figure Model Kit #35163
Started in 1943 by the Allied forces, the Italian Campaign was aimed to take Italy out of WWII and seize its territory. The Italian Army was defeated by the Allies in 1945 with the collapse of the Axis Powers. Allied losses in the campaign were estimated at over 300,000 lives while German casualities were over 600,000 men.
The kit represents two German paratroopers and three tankers, all wearing hot climate uniforms.
The kit contains 51 parts.
Includes parts for five figures.
Box: 260mm x 162mm x 35mm
Miniart 1:35 - German Passenger Car Type 170V 4 Doors
£35.00 GBP
Miniart 1:35 - German Passenger Car Type 170V 4 Doors - Plastic Figure Model Kit #38008
The Type 170V belonged to the Mercedes-Benz family of four cylinder automobiles produced from the mid-1930's into the 1950's. The car was issued in February 1936 and a few years later it became Mercedes' top selling model. Between 1936 and 1942 over 75,000 units were built. Most of the cars produced were two or four door "Limousine" (saloon/sedan bodied cars).
The kit contains 265 parts.
Includes parts for a car with a figure. Photo Etched parts and decals are included.
Box: 345mm x 240mm x 60mm
Miniart 1:35 - German Soldiers (Winter 1941-42)
Sold Out
Miniart 1:35 - German Soldiers (Winter 1941-42) - Plastic Figure Model Kit #35218
The first winter encountered by Nazi forces during the invasion of the Soviet Union was severely cold. The Wehrmacht troops were poorly prepared to spend that period in Russia. The kit represents five exhausted German soldiers trying to warm themselves up by the fire.
The kit contains 45 parts.
Includes parts for five figures.
Box: 260mm x 162mm x 35mm
Miniart 1:35 - German Soldiers at Rest Special Edition
£13.00 GBP
Miniart 1:35 - German Soldiers at Rest - Plastic Figure Model Kit #35378
After the end of the First World War, the military forces of Germany called Reichswehr were limited to 100,000 soldiers under the terms of the Treaty of Versailles. In 1935, the Nazi army was renamed the Wehrmacht which allowed the Third Reich to increase its military strength. The branches of the Wehrmacht were the Heer (army), the Kriegsmarine (navy) and the Luftwaffe (air force). On the Wehrmacht recruitment posters the "ideal German soldier" was depicted as a blond and blue-eyed young man. Werner Goldberg, a German soldier, became the prototype of that image, however later he was "dismissed" after he had been found out to be half-Jewish. It is believed that the total number of soldiers who were recruited for service in the Wehrmacht during its existence from 1935 to 1945 constituted 18.2 million.
The kit contains 47 parts.
Includes parts for five figures: one Nazi officer and four German soldiers. Plus a water pump, barrels, chair, jug, wash tub, pot on bricks and shaving accessories
Box: 260mm x 162mm x 35mm
Miniart 1:35 - German Soldiers at Work
Sold Out
Miniart 1:35 - German Soldiers at Work - Plastic Figure Model Kit #35065
The kit contains 49 parts.
Includes parts for five figures and a set of tools.
Box: 260mm x 162mm x 35mm
Miniart 1:35 - German Tank Crew ( Kharkov 1943 ) Resin Heads
£18.00 GBP
Miniart 1:35 - German Tank Crew ( Kharkov 1943 ) - Plastic Model Kit #35354
On the 19th of February 1943, the II SS Panzer Corps and two panzer armies under the command of Field Marshal Erich von Manstein launched their counterstrike on the Eastern Front, aimed to recapture Kharkov and Belgorod. With extensive air support from Luftflotte 4, in two weeks the German Army defeated the Red Army south of Kharkov and was able to directly engage the city on the 11th of March. After four days of house-to-house fighting, Kharkov was recaptured by the 1st SS Panzer Division on March the 15th. This series of battles is known as the Third Battle of Kharkov, which cost the Red Army over 80,000 casualties. Bevin Alexander, a military historian, called the Third Battle of Kharkov "the last great victory of German arms in the Eastern Front".
This kit contains models of five figures: Miniart 1:35 - German Tank Crew ( Kharkov 1943 ) - Plastic Model Kit plus Weapons and Equipment - Includes Resin Heads
Miniart 1:35 - German Tank Crew, France 1940
Sold Out
Miniart 1:35 - German Tank Crew, France 1940 - Plastic Figure Model Kit #35191
The German invasion of France in 1940 consisted of two main operations - Fall Gelb and Fall Rot. Carried out in May and June 1940, these operations allowed German forces to push deep into France and occupy Paris by 14 June.
This kit represents five German tankmen in early war uniforms during the invasion of France.
You can download instructions for this kit here
The kit contains 38 parts.
Includes parts for five figures.
Box: 260mm x 162mm x 35mm
Miniart 1:35 - Industrial Building Sections
Sold Out
Miniart 1:35 - Industrial Building Sections - Plastic model kit #35546
This is an unassembled plastic model kit containing undamaged industrial building sections. The sections can be combined with other constructions. The kit is useful for dioramas set in Europe during WWII. Glue and paint are not included.
The kit contains 132 parts.
Box: 345mm x 240mm x 60mm
Miniart 1:35 - Italian Tank Crew
£30.00 GBP
Miniart 1:35 - Italian Tank Crew - Plastic Figure Model Kit #35093
Italian tank crews wore blue overalls, black leather tanker’s helmets with neck guards, and black leather overcoats. The hot climate uniform was similar to the regular one, but made of a light khaki drill. Italian officers were dressed in black lather jackets with lapels. The distinguishing feature of officer's uniform was a five-pointed star in one of the lapels. Italian troops also wore side caps know as "Bustinas" ("Bustina" is an Italian word for "side cap"). The caps were of the standard Italian Grey-Green colour.
This kit features five Italian tank crew members including a tank officer. Goggles, holsters and other figures' equipment are included.
The kit contains 63 parts.
Includes parts for five figures.
Box: 260mm x 162mm x 35mm
Miniart 1:35 - Japanese Tank Crew
£11.00 GBP
Miniart 1:35 - Japanese Tank Crew - Plastic Figure Model Kit #35128
This kit consists of five Imperial Japanese tankmen, four crew members and a tank officer. All the figures are dressed in summer uniform with Gunte gloves ("Gunte" is Japanese for "army gloves"). One figure is wrapped in a Hinomaru Yosegaki, a patriotic flag that was traditionally gifted to Japanese soldiers to bring good luck in war. Each tankman carries a holster for a Type 94 Nambu pistol and an ammunition pouch for the Type 99 light machine gun. Four Type 30 bayonets in scabbards and five pairs of goggles are also included. The officer is supplied with a map case, a binocular case and a sword.
The kit contains 57 parts.
Includes parts for five figures.
Box: 260mm x 162mm x 35mm
Miniart 1:35 - Market Garden (Netherlands 1944)
Sold Out
Miniart 1:35 - Market Garden (Netherlands 1944) - Plastic Figure Model Kit #35148
Operation Market Garden began on the 17th of September 1944 with the landing of Allied forces in the Netherlands. Aiming to seize the bridges across the Maas and the Rhine, British paratroopers suddenly lost radio communication and failed to achieve the objectives of the mission.
The kit represents three British paratroopers seized by a pair of Germans from the Luftwaffe Field Division. Both Germans are equipped with Karabiner 98 kurz rifles, ammo pouches, bread bags, water bottles and knives. One of the British soldiers has an ammo pouch as well. Decals for the German collar or shoulder tabs are not included.
The kit contains 58 parts.
Includes parts for five figures and ammunition.
Box: 260mm x 162mm x 35mm
Miniart 1:35 - Metal Bridge
£10.00 GBP
Miniart 1:35 - Metal Bridge - Plastic model kit #35531
This is an unassembled plastic model kit containing a metal bridge with handrails.
The kit contains 40 parts.
Box: 290mm x 190mm x 45mm
Miniart 1:35 - Middle East Diorama
Sold Out
Miniart 1:35 - Middle East Diorama - Plastic model kit #36056
This is an unassembled plastic model kit containing a diorama base and buildings.
The kit contains 255 parts.
Model Dimensions: Length 351mm, Width 251mm
Box: 380mm x 280mm x 80mm
Miniart 1:35 - North African Ruins
Sold Out
Miniart 1:35 - North African Ruins - Plastic kit #35543
The kit contains 95 parts for the assembly of a ruined North African building.
Model dimensions:
Length - 131mm
Height - 270mm
Width - 80mm
Box: 345mm x 240mm x 60mmm x 60mm
Miniart 1:35 - Office Furniture and Accessories
Sold Out
Miniart 1:35 - Office Furniture and Accessories - Plastic Figure Model Kit #35564
This kit represents office furniture and accessories of the WWII period. In addition to the furniture, the set also includes three wall maps (US, German and Soviet) and a variety of propaganda posters from different countries which gives you several options for where your diorama can be set.
The kit contains 59 parts.
Box: 260mm x 162mm x 35mm
Miniart 1:35 - Pz.Kpfw. III Ausf. C
£48.00 GBP
Miniart 1:35 - Pz.Kpfw. III Ausf. C - Plastic Figure Model Kit #35166
The Panzerkampfwagen III, widely known as the Panzer III, was a German medium tank produced by the Daimler-Benz AG in the 1930's. According to the Army Weapons Department plans, the Panzer III was aimed to serve as the main battle tank of the German Panzer divisions. It was meant to fight enemy tank forces with the support of the Panzer IV which was intended to neutralise anti-tank guns.
The Panzer III was able to reach speeds up to 40 km/h by road and 20 km/h off road. Its armament included one 37 mm KwK 36 L/45 cannon and two 7.92mm MG34 machine guns. Compared to its successors, the Ausf. G and Ausf. J, the Panzer III featured a relatively thin armour (15 mm). It had space for five crew members.
When the Soviet T-34 first appeared on the battlefield, the Germans saw the urgent need for a more powerful anti-tank gun. The decision was made to redesign the Panzer IV as it had more potential for further development. The Ausf. C soon became outdated and its production ended in 1943. The tank was deployed in several German campaigns of the early war period including the September Campaign in Poland, the Fall of France and Operation Barbarossa.
The kit contains 1047 plastic parts. It is the first plastic model of the Pz. Kpfw. III Ausf. C.
Box: 380mm x 240mm x 60mm
Additional:
- 1171 total details
- 1047 plastic parts
- 63 photo etched parts
- 11 clear plastic parts
- Decals sheet for 5 options
- Full-colour instruction
- Fully detailed interior of turret
- Crews vision periscopes with clear plastic parts
- All hatches can be assembled open or closed
- Workable chassis and track link
© 2025 Panzer Models. Prepared by Article.
