The Gravel and Sand Fixer is designed to help you glue earth or sand textures and various small objects, like gravel or stones, to your diorama base. This alcohol-based adhesive is absorbed into the surface and unlike regular white glue it leaves no plastic finish over it.
It is easy to apply the fixer with a brush or an airbrush, and it can be removed with alcohol. To shorten the drying time you can use a hairdryer or any other source of heat. Matt when dry, this product can give your models a light satin look which can be remedied with a matt varnish.
This high quality product is designed for recreating crystal clear water in dioramas and vignettes. The set includes one bottle of epoxy resin, one bottle of hardening agent and two syringes for mixing the components.
Instructions for use: Mix the resin and the hardening agent in 2:1 ratio, apply the solution to the surface, and let it dry for 24 hours.
The mixture does not shrink or bubble with drying. This product is non-toxic and can be thinned if needed.
AK8044 Resin Water 2 Part Epoxy, 180ml
AK8043 Resin Water 2 Part Epoxy, 375ml
The drying time ranges from 2 to 4 hours depending on the amount of product used and the temperature. Can be diluted with water or acrylic thinner to improve the flow. Non- toxic.
Video tutorial on making snow using Snow Sprinkles
Includes: 1 x 100 ml bottle
High quality acrylic resin to mix with pigments for fixing textures and adding a matte finish. Texturizer can be used for making terrains and lower parts of vehicles.
Includes: 1 x 100ml bottle
Base plaster is used mainly to recreate mud and soil terrains for your dioramas. Mix it with AK Interactive weathering products to get the desired colour and tone. If your mixture is too thick you can dilute it with white spirit. Once dried and solidified, paint details of your terrain to add more realism. You can also use a brush to splatter soil over vehicles or other surfaces, to recreate mud the way it would behave in real life.
Includes: AK-617 Weathering Plaster Base, 100 ml
This slightly tinted liquid crystalline product is designed for replicating small puddles and standing dirty water in your dioramas and vignettes.
Apply the product in thin layers, no more than 3mm at a time. It is self levelling and capable of flowing over uneven surfaces. In order to create a thicker layer, build up thin layers. Puddles are easy to handle with a brush.
High quality acrylic product.
Includes: AK Interactive Puddles, 60ml
Apply this powder texture over terrain or vehicle surfaces to create the effects of a light snowfall or thawing snow. This product can be fixed on the surface of your models with white glue, varnish or Gravel & Sand Fixer. It is recommended to use it in combination with wet effects products to achieve the most realistic results. In order to create the effect of dirty snow, mix Snow Microballoons with AK Interactive Puddles.
Includes: AK Interactive Snow Microballoons, 100ml
AK Interactive Terrains are acrylic products designed for creating textures in dioramas. It is easy to achieve great results in both thin and thick layers. These products can be diluted with water or acrylic thinner to improve the flow. The recommended drying time is 24 hours.
Snow texture is designed for creating snow effects on any surface – terrain, vehicles or buildings.
Asphalt and Concrete textures have a grey shade similar to that of roads, asphalt covered surfaces, runways and concrete buildings.
Dry, Wet and Muddy ground textures are intended for recreating dry or wet soil and mud. In order to create track marks, press the wheels or tracks onto the surface before it dries.
Dark Earth is perfect for recreating rich dark shades of earth on diorama bases where a thick and dense texture is desired. Light Earth texture is designed for lighter shades of earth.
Beach Sand is a fine and flat texture for recreating beach areas such as the beaches of Normandy. Desert Sand is suitable for any type of desert scene, for example North Africa. It can be shaped when wet and is very useful for making dunes.
8011 AK Interactive Terrains - Snow, 250ml
8013 AK Interactive Terrains - Asphalt, 250ml
8014 AK Interactive Terrains - Concrete, 250ml
8015 AK Interactive Terrains - Dry Ground, 250ml
8016 AK Interactive Terrains - Wet Ground, 250ml
8017 AK Interactive Terrains - Muddy Ground, 250ml
8018 AK Interactive Terrains - Dark Earth, 250ml
8019 AK Interactive Terrains - Beach Sand, 250ml
8020 AK Interactive Terrains - Desert Sand, 250ml
8021 AK Interactive Terrains - Light Earth, 250ml
8022 AK Interactive Terrains - Sandy Desert, 250ml
8023 AK Interactive Terrains - Neutral Texture - Earth, 250ml
Still Water is a liquid crystalline product specially designed to reproduce the effect of clear still water on dioramas and vignettes. Still Water is self levelling and capable of flowing over uneven surfaces; apply thin layers, no more than 3 mm at a time. If depth is desired, build up thin layers. When applied on non-porous surfaces, such as glass, this product can be lifted and cut to desired shape. High quality acrylic product.
This product can be tinted with acrylics offering many possibilities.
250ml in a bottle.
Solid Water is a low odour, 2 part resin for simulating crystal clear, hard and durable water. It helps create the illusion of deep water with minimal thickness.
Using one of the syringes, accurately measure 2 parts of resin into the mixing cup. Ensure that you do not cross contaminate the syringes. For each 2 parts of resin, add 1 part of hardener. Do not add extra hardener, as it will not accelerate the curing time. Using the spatula, mix thoroughly and add colour if necessary. Pour the solid water into your prepared base. If required, the solid water can be textured with a toothbrush after 8 to 10 hours, which gives the illusion of a realistic flow of water. The solid water will need 24 hours to fully harden.
Starter set for creating a diorama base, includes:1x Mod Podge - BS Mod Podge Matte 8 Oz. / 236ml
Mod Podge - BS Mod Podge Matte 8 Oz. / 236ml
Suitable for paper craft projects
Is quick-drying for multiple coats build up and dries clear
Can be sanded to a smooth finish
Cleans up easily while wet with soap and water
Non-toxic and water-based
130g Bag of Amaco Plaster Sculptamold Modelling Compound White
Non-toxic and acid free
Made in USA
Designed for easy usage and storage
A modelling and casting compound for all ages. Finished objects are lightweight and extremely durable. This compound mixes easily and quickly with water and models like clay but sets like plaster in 30 minutes. It adheres to most clean surfaces and can be oven dried at 200 degrees. When dry Sculptamold can be sanded sawed carved or nailed without chipping.
Blue Styrofoam Sheet (20mm, A4 Sized)
Ideal for diorama bases, can be glued, cut or shaped with heat. High density modelling foam.
Milliput Modelling Clay - Standard (Yellow/Grey)
Comes in packs containing 2 x 56·7gm. Sticks and the general instructions for preparation and usage are the same.
The two sticks have a long shelf life but once mixed the resultant putty is at first soft and highly adhesive and then gradually hardens. Speed of hardening is dependant on temperature and at normal temperatures (20-25ºC) Milliput becomes rock hard in three to four hours. By the application of heat the setting time can be reduced to a few minutes.
After setting hard Milliput continues to cure and is fully cured after an elapse of time equal to the setting time at the same temperature. Once fully cured Milliput can be machined, drilled, tapped, turned, filed, sawn, sandpapered and painted. Milliput can be sandpapered and painted immediately it has set. (it is advisable to wear eye protection during this process).
Milliput is an excellent adhesive and will bond any of the following to itself or to any of the others - wood, brick, cement, metals, concrete, plastics, glass etc, but note that Milliput is not intended as a thin layer adhesive and should not be used where a paste, mucilage or thin glue is indicated. Milliput will set under water and is heat resistant up to 130°C.
Miniart 1:35 - Street Lamps & Clocks - Plastic model kit #35560
This is an unassembled plastic kit containing European street lamps and clocks.
- Two street lamps on posts
- One clock on a post
- Additional clock without a post
- Additional lamp without a post
The kit contains 93 parts including clear parts.
Decals for clock dials are provided.
Box: 260mm x 162mm x 35mm
Glue and paint are not included.
You can download instruction sheets here.
A very useful scenic product for recreating tall grass. Supplied in tufts that can be stuck down easily and arranged to create a realistic ground cover, various colours available for different seasons and locations. Whatever modelling terrain type you are working on this product can work well - e.g. with woodland, marsh, light scrub, grassland (taiga), coastal, urban, mountainous, arid, temperate or arctic. More grass types coming soon.
100 tufts per pack.
Dark Green - This is useful for representing darker grasses with browns and reds, autumn temperate grasses for example.
Light Brown - For more arid/drier region grasses where grass is more patchy and covers less of the ground.
Panzer Models Scenics - 1:35 scale Pine Tree Boughs for making realistic model pine trees
Includes: 15 x Pine boughs
This product is made to order, please allow a few extra days for delivery. If you would like to know how to make this yourself please email us and we will be happy to tell you.
Note: This product contains delicate parts - please take care when opening and separating the boughs. For best results drill small holes into a prepared plywood pole, trim and shape the boughs as desired and glue them into the holes. Consider the type of Pine tree you want to create in how you trim and arrange the boughs.
A small blister pack of scatter for basing and diorama model building in 1/35 scale.
Forest Floor - Various fine grains of dark brown scatter and wood shavings, plus small sticks to create an effective woodland floor mix.
A small blister pack of rocks or for basing and diorama model building in 1/35 scale.
Slate rocks - Large homogeneous metamorphic rocks, mid grey colour.
Dark stones - Medium sized rocks, useful for igneous or sedimentary stones.
Grey stones - Medium sized rocks, useful for igneous or sedimentary stones.
A small blister pack of sand for basing and diorama model building in 1/35 scale.
Fine sand - Fine grains of sand
Heavy sand - More coarse sand grains.
Sand with rocks - A mix of fine sand with rocks.
Vallejo Stone Textures - Desert Sand
Vallejo Desert Sand is an acrylic paste that helps create sandy surfaces like those of beaches and deserts. The paste has a medium viscosity.
Includes: 1 x 200 ml bottle
VAL26217 Desert Sand
Vallejo Textures Set - 35ml, set #73195
An introductory selection of some of the most popular Vallejo texture products - water, earth and stone, all in one convenient set.
Includes: 4 x 35 ml textures
Vallejo Water Effects - Atlantic Blue
Vallejo Atlantic Blue is a thick semitransparent gel designed for reproducing the colour of the Atlantic Ocean. It is perfectly suited for creating realistic water effects in your dioramas. In order to achieve a deep end colour, it is advised to paint the base with a darker shade before using the gel. Drying time is about 24 hours depending on the thickness of the layer applied.
Includes: 1 x 200 ml bottle
VAL26204 Atlantic Blue
Vallejo Water Effects - Foam and Snow 32ml
This product is intended for easy and quick creation of true to life water foam or layers of snow.
Includes: 1 x 32 ml bottle
Vallejo Water Effects - Pacific Blue
Vallejo Pacific Blue is perfect for creating realistic water effects. This is a thick semitransparent gel used for reproducing the Pacific Ocean in your dioramas. If you aim to achieve a deep end colour, it is recommended to paint the base with a dark shade prior to applying the gel. The gel dries in about 24 hours, depending on the thickness of the layer.
Includes: 1 x 200ml jar
VAL26203 Pacific Blue
Vallejo Water Effects - Transparent Water (colourless), VAL26201
This product is ideal for creating realistic water effects for dioramas. With its help one can make waves, peaks, icicles, waterfalls or simply reproduce a moving water texture. Drying time is about 24 hours according to the thickness of the layer applied. The dried surface is transparent and shining.
Includes: 1 x 200 ml bottle