Starter set for creating a diorama base, includes:1x Mod Podge - BS Mod Podge Matte 8 Oz. / 236ml
Mod Podge - BS Mod Podge Matte 8 Oz. / 236ml
Suitable for paper craft projects
Is quick-drying for multiple coats build up and dries clear
Can be sanded to a smooth finish
Cleans up easily while wet with soap and water
Non-toxic and water-based
130g Bag of Amaco Plaster Sculptamold Modelling Compound White
Non-toxic and acid free
Made in USA
Designed for easy usage and storage
A modelling and casting compound for all ages. Finished objects are lightweight and extremely durable. This compound mixes easily and quickly with water and models like clay but sets like plaster in 30 minutes. It adheres to most clean surfaces and can be oven dried at 200 degrees. When dry Sculptamold can be sanded sawed carved or nailed without chipping.
Blue Styrofoam Sheet (20mm, A4 Sized)
Ideal for diorama bases, can be glued, cut or shaped with heat. High density modelling foam.
Milliput Modelling Clay - Standard (Yellow/Grey)
Comes in packs containing 2 x 56·7gm. Sticks and the general instructions for preparation and usage are the same.
The two sticks have a long shelf life but once mixed the resultant putty is at first soft and highly adhesive and then gradually hardens. Speed of hardening is dependant on temperature and at normal temperatures (20-25ºC) Milliput becomes rock hard in three to four hours. By the application of heat the setting time can be reduced to a few minutes.
After setting hard Milliput continues to cure and is fully cured after an elapse of time equal to the setting time at the same temperature. Once fully cured Milliput can be machined, drilled, tapped, turned, filed, sawn, sandpapered and painted. Milliput can be sandpapered and painted immediately it has set. (it is advisable to wear eye protection during this process).
Milliput is an excellent adhesive and will bond any of the following to itself or to any of the others - wood, brick, cement, metals, concrete, plastics, glass etc, but note that Milliput is not intended as a thin layer adhesive and should not be used where a paste, mucilage or thin glue is indicated. Milliput will set under water and is heat resistant up to 130°C.
Vallejo Model Colour paints are suitable for all surfaces and adhere especially well to plastics and polyesters. These paints will allow you to easily cover even large surfaces without leaving brushstrokes. They are equally perfect for the smallest details of miniature artwork. All the colours dry to a matte and opaque finish except for the metallic and transparent colours.
Model Colour paints can be diluted with water and mixed with one another. They do not contain solvents or any ingredients harmful to health, and are not inflammable. Once the paint has dried, it is waterproof and permanent.
Blue shades available in this listing:VAL 807 - AV Vallejo Model Color - Oxford Blue
Dragon 1:35 - Italian Paratroopers, Anzio 1944 - Plastic Model Kit #6741
The Italian Paratroopers Division "Nembo" was officially formed in November 1942. Following the armistice of September 1943 which stipulated the surrender of Italy to the Allies, violent conflicts arose in the division with some units wishing to comply with the directives of the Italian Government and others refusing to accept the change of alliances. As a result some of the "Nembo" division units became part of the Italian Co-belligerent Army and fought alongside the Allies for the liberation of Italy, while others remained on the German side. The latter participated in the German counterattack at Anzio since February 1944. The Battle of Anzio was part of the Italian Campaign of WWII which started with Operation Shingle, the Allied amphibious landing on the 22nd of January 1944, and ended in June 1944 with the capture of Rome.
This kit contains over 60 parts for the assembly of four figures of Italian paratroopers. The paratroopers are wearing a mix of Italian and German uniforms - German Fallschirmjager smocks and Italian helmets and vests. Weapons and accessories are also a mix of Italian and German.
Dragon 1:35 - Stalingrad Inferno - Plastic Model Kit #6343
The Battle of Stalingrad was the largest battle of WWII and the bloodiest confrontation in the history of warfare, with almost 2 million people killed, wounded or captured. From August 1942 until February 1943, Germany and its allies fought the Red Army for control of the city of Stalingrad. After over five months of heavy fighting, Axis forces exhausted their ammunition and food and the remaining units surrendered. After the Battle of Stalingrad, the Nazi government for the first time publicly acknowledged a failure in its war effort.
This kit contains over 50 parts for the assembly of four figures of German soldiers during the Battle of Stalingrad in 1942-1943.
Dragon 1:35 - German Combat Unit, Waffen SS, Ardennes 1944-45 - Plastic Model Kit #6002
The last major German offensive on the Western Front of WWII, the Battle of the Bulge ('Unternehmen Wacht am Rhein' or the Ardennes Counteroffensive) was launched on the 16th of December 1944 through the dense forest of Ardennes in eastern Belgium. The German plan was to destroy the Allied armies and force them to negotiate a peace treaty in Germany's favour. Germany would then be able to fully concentrate their efforts on the Eastern Front.
The German Army planned this offensive with utmost secrecy, and on 16 December 1944 the surprise attack caught the Allies completely off guard. American forces incurred their highest casualties of any operation during WWII. However fierce resistance on the Elsenborn Ridge and around Bastogne impeded the German advance and allowed the Allies to reinforce their troops. Subsequent Allied air attacks led to the failure of the offensive. The Battle of the Bulge was the second bloodiest battle in American history.
This kit contains over 60 parts for the assembly of four figures of German soldiers.