Milliput - Superfine White - 113g Stick
G-MP803
£5.48 GBP
Milliput Superfine White - 113g Stick - G-MP803
This Superfine White epoxy putty is at first soft and highly adhesive and then gradually hardens. The speed of hardening depends on temperature and at normal temperatures (20-25°C) Milliput becomes rock hard in three to four hours. With the application of heat the setting time can be reduced. After setting hard Milliput continues to cure and is fully cured after an elapse of time equal to the setting time at the same temperature. Once fully cured Milliput can be tapped, filed and painted. Milliput will set under water and is heat resistant up to 130°C.
Mix together equal parts of each stick from the pack. Knead and roll in the hands for at least 5 minutes until the colours merge and become uniform and no streaks can be seen, and then mix for another minute. The surfaces to which the putty is applied should be free from grease and dirt. Smooth surfaces should be cleaned with a suitable solvent or with soap and warm water to remove dirt and grease. Abrading the surface will improve adhesion. The putty may now be applied and will set hard in three to four hours without shrinking.
Related Items
Wall Poster 50x70cm - Tiger I Urban Diorama WWII
£18.00 GBP
These wall posters featuring the Panzerkampfwagen VI Tiger I are 50cm high by 70cm wide. The posters are ideal for any WWII enthusiasts, military historians or modellers as a piece of wall art. Each poster has a full colour graphic of the Tiger tank in a war torn urban location.
Size: 500mm x 700mm (50cm x 70cm)
All posters fit the low cost sleek Ikea Ribba frames (Article no: 502.688.74)
Master Box 1:35 - Screaming Eagles, 101st Airborne 1944-45
£11.00 GBP
Master Box 1:35 - Screaming Eagles, 101st Airborne 1944-45 - Plastic Figure Model Kit #3574
The US 101st Airborne Division was created during WWII and its paratroopers saw action and played vital roles during the D-Day landings (Drop zones Able, Charlie and Dog), Operation Market Garden, the Battle of the Bulge and more. The Band of Brothers book was based on paratroopers from E Company 506th PIR (Parachute Infantry Regiment).
This kit contains parts for the assembly of four figures.
Meng Model 1:35 - British Army Husky Tactical Support Vehicle
£45.00 GBP
Meng Model 1:35 - British Army Husky Tactical Support Vehicle - Plastic model kit #MNGVS-009
This is a 1:35th scale British Army Husky Tactical Support Vehicle from Meng Models.
This plastic model is 183mm long, 81mm wide and 85mm high and has a total of 320 parts.
It features perfectly reproduced interiors of the crew compartment.
Doors can be built open or closed.
The roof weapon station is rotatable.
Front wheels are steerable.
Like other MENG kits, it also has clear lights and fine PE parts.
A useful review with more pictures here.
See also the Sagged Wheel resin set here.
PLEASE NOTE: Paints and Glue are required to build this model and must be bought separately.
Meng Model 1:35 - Husky Sagged Wheel Set (Resin)
£38.00 GBP
Meng Model 1:35 - Husky Sagged Wheel Set (Resin) MNGSPS-064
This SPS-064 British Army Husky TSV Sagged Wheel Set contains 4 sagged wheels (2 front wheels and 2 rear wheels). This resin wheel set realistically replicates the weighted wheels on real vehicles. Wheel hubs are detailed and delicate. The rugged tire tread is excellent.
© 2019 Panzer Models. Prepared by Article.
