Trumpeter 1:35 20mm Flakvierling 38 auf Selbstfahrlafette
TRU01524
£38.00 GBP
Trumpeter 1:35 - German 2cm Flakvierling 38 auf Selbstfahrlafette (Sd.Kfz.7/1 Late Version) - Plastic model kit #01524
The Flak 38 was a German 20mm anti-aircraft gun used throughout WWII which became the most numerously produced German artillery piece of the period. The 20mm Flakvierling 38 auf Selbstfahrlafette (Sd. Kfz. 7/1) was the result of combining the 20mm Flakvierling 38 with four Flak 38 guns and the Sd. Kfz. 7 half-track, to provide greater mobility and firepower. The Sd. Kfz. 7/1 carried 600 2cm rounds on board and 1800 rounds in the towed Sd. Ah. 56 trailer. The guns had the 360 degrees traverse by hand and could be elevated from -10 to +100 degrees. The later versions also included an armoured cab for better protection of the crews. A crew of 10 included a gun commander, eight gunners and a driver.
The first 100 vehicles were produced in 1940-1941 and production continued at a rate of 10 vehicles per month until August 1942, when the monthly rate was significantly increased. Around 800 vehicles were produced by December 1944. From 1942, most vehicles were fitted with lightly armoured driver cabs and a plate to protect the engine compartment. The armour was 8mm thick. These vehicles were issued to Flak units of the Luftwaffe and Panzer units of the German Army. Sd. Kfz. 7/1 units were used to protect armoured units against low flying aircraft but were also successfully used against ground targets.
The kit represents a late version of the Sd.Kfz.7/1 with a 20mm Flakvierling 38. Early versions featured the central circular pivot mounting for the 20mm Flakvierling 38. Later versions had a normal ground mounting fitted to the rear bed which allowed the gun to be easily removed and mounted on the standard Flakvierling Sd. Ah. 52 trailer if necessary.
Item No: 01524
Item Name: German 2cm Flakvierling 38 auf Selbstfahrlafette (Sd.Kfz.7/1 Late Version)
Scale: 1:35
Item Type: Static Armour
Model Dimensions: Length 312.5mm, Width 69mm, Height 107mm
Total Parts: 859 pcs
Metal Parts: Brass wire
Photo Etched parts: 5 frets
Total Sprues: 20 pcs sprues, 3 rubber tyres and an armoured cab
Paint Schemes: Markings are provided for vehicles in dark yellow with red brown and green camouflage scheme
Release date: 2009-07
Additional:
- New tooled slide-moulded one-piece late type KM m11 mudguard
- Side panels and the top panel of the engine hood can be opened
Related Items
Academy 1:35 - Flakpanzer IV Wirbelwind (Replaces ACA01333)
Sold Out
Academy 1:35 - Flakpanzer IV Wirbelwind (Replaces ACA01333) - Plastic Figure Model Kit #13236
The Flakpanzer IV "Wirbelwind" (Whirlwind in English) was a self-propelled anti-aircraft gun designed by the Germans on the basis of the Panzer IV tank. Its development was launched in 1944 when Nazi troops suffered great losses from Allied Air Forces.
The Flakpanzer IV featured an open-top turret fitted with four 2 cm Flak 38 anti-aircraft guns. It was nicknamed "Keksdose" ("Biscuit Tin") because of the turret shape which reminded of a nine-sided polygon.
On the battlefield 2 cm shells turned out insufficient against aircraft, however in general the gun performed well against infantry troops as well as trucks and armoured cars. Later the Flakpanzer IV was replaced with the Flakpanzer IV Ostwind (East Wind), a version more powerful against air targets.
Academy 1:35 - M3 Stuart "Honey" British version (Replaces ACA01399)
Sold Out
Academy 1:35 - M3 Stuart "Honey" British version (Replaces ACA01399) - Plastic Model Kit #13270
The M3 Stuart was an American light tank that had been delivered to British forces by the US Government during WWII, before the Americans officially entered the war. Subsequently it was deployed by the Allies until the capitulation of Germany.
"Stuart" was a nickname given in reference to James Stuart, an American Confederate States Army general of the Civil War. When a British tankman saw the tank for the first time, he remarked "She's a honey". That name stuck and in British service the M3 was often referred to as "Honey".
Compared to the previous Light Tank M2, the Stuart had an improved suspension, better gun recoil mechanism and thicker armour, unusual for a light tank. The vehicle was armed with a 37mm M5 gun (which was later replaced with a longer M6 version) and a several Browning machine guns. The tank production lasted from 1941 to 1943.
In 1941 the British army had 700 Stuart tanks in service, 170 of which were deployed in Operation Crusader in North Africa. Though Stuarts surpassed most of the Axis tanks in many respects, the operation was unsuccessful due to the poor tactics of British troops.
In the following years the British usually avoided using Stuarts in tank-to tank fights, deploying them mostly in reconnaissance operations. In some cases the turret was removed for the sake of lighter weight and better mobility (such versions were known as "Stuart Recce"), some other units were transformed to either armoured personnel carriers ("Stuart Kangaroo") or command vehicles ("Stuart Command"). The M3 served with the British army till the end of the war, though in smaller numbers than those used by the Americans.
Academy 1:35 - M36/M36B2 "Battle of the Bulge"
Sold Out
Academy 1:35 - M36/M36B2 US Army "Battle of the Bulge" - Plastic Figure Model Kit #13501
The American tank destroyer M36 was designed in 1943 when the US Army needed a powerful vehicle to combat German Panther and Tiger tanks. This new tank was nicknamed "Jackson" in reference to the Confederate General of the Civil War, Stonewall Jackson. The M36's turret mounted the 90 mm gun M3 allowing the tank to nail down any known German tanks at 1000 to 2500m range depending on the armour thickness. However, due to its open-top turret the tank was vulnerable to shell fragments and snipers. Field modifications, particularly additional roof iron plating, were hastily performed by the crews. Later on folding panels were developed for protection against shell fragments, these were adopted by the M36B2.
Kit details:
- Can be built as M36 or M36B2
- 90mm main gun
- .50 caliber machine gun
- Over 600 plastic parts
- Photo-etched parts included
- Detailed driver's station
- Detailed hull interior with crew and ammo stowage
- Detailed turret interior including stowage and gun breech
The following markings are provided:
- M36, US Army 82nd Airborne Div, Belgium, 1944
- M36, US Army 703rd TD, Belgium, 1944
- M36, US Army 2nd Cavalry, Germany 1945
- M36B2, ROK Army, 53rd Tank Company, 1953
- M36B2, France Régiment Blindé Colonial d'Extrême-Orient, Tonkin, 1951
- M36B2, France Régiment Blindé Colonial d'Extrême-Orient, Tonkin, 1953
Download the manual here
Academy 1:35 - M4A3 76mm US Army "Battle of the Bulge"
Sold Out
Academy 1:35 - M4A3 76mm US Army "Battle of the Bulge" - Plastic Figure Model Kit #13500
The Medium Tank M4 Sherman was commonly used by the United States and other Western Allies during WWII. The tank was produced in large numbers, with thousands distributed through the Lend-Lease program to the British Commonwealth and Soviet Union. The British called the M4 'Sherman' after the American Civil War General William Tecumseh Sherman.
During the Second World War, about 19,247 Sherman tanks were issued to the US Army and about 1,114 to the US Marine Corps. Moreover, the U.S. supplied 17,184 tanks to Great Britain, some of which went to the Canadians and the Free Poles. The Soviet Union received 4,102 vehicles and an estimated 812 were transferred to China. These tanks were distributed to the respective countries' allied nations.
The M4A3 was a sub-type of the Sherman tank. It featured a welded hull and was powered by a Ford GAA engine. Its armament consisted of a 76mm cannon and a 12.7mm machine gun. This variant was mainly deployed by the US Army with only a few units sent to France and Nicaragua. A number of these tanks took part at the Battle of Bulge in December 1944.
Check out a step by step video of building this kit here
Download the manual here
Kit details:
- Engine deck, VVSS suspention (late version) and accessories newly tooled
- Main canon and 12.7mm machine gun accurately reproduced
- T48 duckbill tracks included
- Photo-etched parts and 6 marking options included
© 2024 Panzer Models. Prepared by Article.
