Desert and Arid Dioramas
HobbyBoss 1:35 - Sd.Kfz.222 Leichter Panzerspahwagen 2cm
£32.00 GBP
The Leichter Panzerspähwagen was a light four-wheel drive armoured car produced by Nazi Germany between 1935 and 1944. It had the standard sPkw I Horch 801 chassis and a 67 kW (90 hp) Horch 3.5 petrol engine, which gives it a road speed of 80 km/h and a cross-country speed of 40 km/h. The car had a maximum range of 300 km. Its armament consisted of one 2 cm KwK 30 L/55 main cannon and one MG 34 secondary machine gun.
The Leichter Panzerspähwagen was used by the reconnaissance battalions of the Panzer divisions. It performed well enough in countries with good road networks, like Western Europe, but on the Eastern Front and in North Africa it was hampered by its relatively poor off-road performance and was gradually replaced in the reconnaissance role by the Sdkfz 250 half-track.
Item No: 82442
Item Name: Sd.Kfz.222 Leichter Panzerspahwagen 2cm
Scale: 1:35
Item Type: Static kit
Model Dimension: Length 131.55mm Width 60.5mm
Total Plastic Parts: 297 pcs
Total Sprues: 5 sprues, upper hull, lower hull and 4 tires
Camouflage Scheme: Deutsches Afrika Korps (DAK)
Photo Etched Parts: 3 pcs
Release Date: 2009-11
Additional:
- Fully detailed Interior
- Multi-directional slide moulded upper hull
- Two-directional slide moulded lower hull
- Photo-etched parts included
HobbyBoss 1:35 German Sd. Kfz. 254 Tracked Armoured Scout Car
£37.00 GBP
The Saurer company started to develop the vehicle in 1936 as an artillery tractor for the Austrian army. The first tractors were produced in 1938. About 12 vehicles were made prior to Anschluss (incorporation of Austria into Nazi Germany, March 1938). After the Anschluss production continued. A total of 140 units were built with the new designation RK-7 (Räder-Kettenfahrgestell), although Wehrmacht called them Sd. Kfz. 254. The vehicle had a wheel/track layout and a diesel motor. The wheels were lowered when it was used on roads and retracted for cross-country movement. Some Sd. Kfz. 254's served as artillery observation vehicles for the Afrika Korps after being fitted with a radio and rail antenna.
Item No: 82491
Item Name: German Sd. Kfz. 254 Tracked Armoured Scout Car
Scale: 1:35
Item Type: Static kit
Model Dimension: Length 123.8mm, Width 64.8mm
Total Plastic Parts: 520+
Total Sprues: 20 sprues, upper hull, lower hull and tires
Photo Etched Parts: 1 piece
Release Date: 2012-05
Additional:
- The kit consists of over 520 parts
- Multi-directional slide moulded lower hull and upper hull
- Rubber tires have very good details
- 324 individual tracks links
- Photo-etched parts included
HobbyBoss 1:35 German Sd.Kfz.222 Leichter Panzerspahwagen (1st Series)
Sold Out
The Leichter Panzerspähwagen was a light four-wheel drive armoured car produced by Nazi Germany between 1935 and 1944. It had the standard sPkw I Horch 801 chassis and a 67 kW (90 hp) Horch 3.5 petrol engine, which give it a road speed of 80 km/h and a cross-country speed of 40 km/h. The car had a maximum range of 300 km.
The Leichter Panzerspähwagen was used by the reconnaissance battalions of the Panzer divisions. It performed well enough in countries with good road networks, like Western Europe, but on the Eastern Front and in North Africa it was hampered by its relatively poor off-road performance and was gradually replaced in the reconnaissance role by the Sdkfz 250 half-track.
Item No: 83815
Item Name: German Sd.Kfz.222 Leichter Panzerspahwagen (1st Series)
Scale: 1:35
Item Type Static kit
Model Dimensions: Length 130.5mm, Width 59.5mm
Total Plastic Parts 310+
Total Sprues: 14 sprues, upper hull, lower hull and tires
Metal Parts: n/a
Photo Etched Parts: 3 pieces
Release Date: 2014-05
Additional:
- Fully detailed Interior
- Multi-directional slide moulded Upper hull
- Two-directional slide moulded Lower hull
- Four rubber tires w/fine detail
- Photo-etched parts included
HobbyBoss 1:35 German Sd.Kfz.221 Leichter Panzerspahwagen (3rd Series)
£23.00 GBP
The Leichter Panzerspähwagen was a light four-wheel drive armoured car produced by Nazi Germany between 1935 and 1944. It had the standard sPkw I Horch 801 chassis and a 67 kW (90 hp) Horch 3.5 petrol engine, which give it a road speed of 80 km/h and a cross-country speed of 40 km/h. The car had a maximum range of 300 km.
Used by the reconnaissance battalions of the Panzer divisions, the Leichter Panzerspähwagen performed well enough in countries with good road networks, like Western Europe. However, on the Eastern Front and in North Africa these vehicles were hampered by their relatively poor off-road performance, and were gradually replaced in the reconnaissance role by the Sdkfz 250 half-track.
Item No: 83812
Item Name: German Sd.Kfz.221 Leichter Panzerspahwagen (3rd Series)
Scale: 1:35
Item Type Static kit
Total Plastic Parts 320+
Total Sprues: 13 sprues, upper hull, lower hull and tires
Metal Part: Stainless steel net
Photo Etched Parts: 2 pieces
Release Date: 2015-08
Additional:
- Fully detailed Interior
- Multi-directional slide moulded Upper hull
- Two-directional slide moulded Lower hull
- Four rubber tires w/fine detail
- Photo-etched parts included
HobbyBoss 1:35 M3A1 Scout Car 'White' Early Version
£31.00 GBP
HobbyBoss 1:35 - M3A1 Scout Car 'White' Early Version - Plastic model kit #82451
The U.S. M3A1 Scout Car 'White' was produced from 1940 until 1944 with 20,918 vehicles built in total. The car was used for a number of purposes including patrol and scouting. It also served as a command vehicle, ambulance and gun tractor.
The M3 was used by the cavalry units of the U.S. Army in the North African Campaign, the invasion of Sicily, and a small number of vehicles were deployed in Normandy. The M3A1 was supplied to the Soviet Union and Britain under lend-lease. These vehicles were also used by the Free French Forces as well as Belgian, Czechoslovak and Polish units.
Item No: 82451
Item Name: U.S. M3A1 "White Scout Car" Early Production
Scale: 1:35
Item Type: Static kit
Model Dimension: Length 172mm, Width 74mm
Total Plastic Parts: 240+ pcs
Total Sprues: 10 pcs
Chromeplate Parts: n/a
Camouflage Scheme: US Army
Resin Parts: n/a
Metal Parts: n/a
Photo Etched Parts: 1 piece
Release Date: 2011-01
Additional:
- The kit w/refined detail consists of over 240 parts, includes 4 clear parts
- Detailed main tyres
- Photo-etched parts for engine fan, etc.
© 2024 Panzer Models. Prepared by Article.
