All
AK Interactive - US WWII Navy Camouflage Set
Sold Out
This set contains 6 acrylic paints designed for painting WWII US Navy camouflages. The colours are true to the original satin colour, with a modification for scale effect. These acrylic paints are designed for both brush and airbrush use. The paints are odourless and water soluble which helps avoid bad smells and the dangers of more aggressive thinners. AK Interactive special formula prevents acrylics from clogging in the airbrush.
Includes:
AK-5001 Deck Blue 20B
AK-5002 Haze Gray 5H
AK-5003 Ocean Gray 5O
AK-5004 Navy Blue 5N
AK-5005 Sea Blue 5S
AK-5006 Light Gray 5L
AK Interactive - Stainless Steel Shakers (250 balls)
£6.00 GBP
To make a paint reach its optimum performance, all components should be thoroughly mixed. Stainless steel balls are perfect for use as agitators in any paint including enamels, primers, and acrylics. Add to a pair to your jar and shake to help it mix quicker. It will make your paint work much easier, faster, and more effective. Contains 250 stainless steel balls.
Modelcraft - Cutting Mats
£2.75 GBP
Modelcraft - Cutting Mats
3 layer PVC mat with sandwich structure ensures no cracking or warping. Non slip surface of the base holds paper firmly and prevents blade run and cutting errors.
Preserves the life of blades and encourages accurate cutting.
Variants:
A2 - 600 x 450mm
A3 - 450 x 300mm
A4 - 300 x 200mm
A5 - 230 x 160mm
A6 - 105 x 148mm
AK Interactive - Texturizer Acrylic Resin 100ml
£7.00 GBP
High quality acrylic resin to mix with pigments for fixing textures and adding a matte finish. Texturizer can be used for making terrains and lower parts of vehicles.
Includes: 1 x 100ml bottle
Milliput - Black - 113g Stick
£5.48 GBP
Milliput Black - 113g Stick - G-MP805
This Black epoxy putty is at first soft and highly adhesive and then gradually hardens. The speed of hardening depends on temperature and at normal temperatures (20-25°C) Milliput becomes rock hard in three to four hours. With the application of heat the setting time can be reduced. After setting hard Milliput continues to cure and is fully cured after an elapse of time equal to the setting time at the same temperature. Once fully cured Milliput can be tapped, filed and painted. Milliput will set under water and is heat resistant up to 130°C.
Mix together equal parts of each stick from the pack. Knead and roll in the hands for at least 5 minutes until the colours merge and become uniform and no streaks can be seen, and then mix for another minute. The surfaces to which the putty is applied should be free from grease and dirt. Smooth surfaces should be cleaned with a suitable solvent or with soap and warm water to remove dirt and grease. Abrading the surface will improve adhesion. The putty may now be applied and will set hard in three to four hours without shrinking.
Milliput - Terracotta - 113g Stick
£5.00 GBP
Milliput Terracotta - 113g Stick - G-MP804
This Terracotta epoxy putty is at first soft and highly adhesive and then gradually hardens. The speed of hardening depends on temperature and at normal temperatures (20-25°C) Milliput becomes rock hard in three to four hours. With the application of heat the setting time can be reduced. After setting hard Milliput continues to cure and is fully cured after an elapse of time equal to the setting time at the same temperature. Once fully cured Milliput can be tapped, filed and painted. Milliput will set under water and is heat resistant up to 130°C.
Mix together equal parts of each stick from the pack. Knead and roll in the hands for at least 5 minutes until the colours merge and become uniform and no streaks can be seen, and then mix for another minute. The surfaces to which the putty is applied should be free from grease and dirt. Smooth surfaces should be cleaned with a suitable solvent or with soap and warm water to remove dirt and grease. Abrading the surface will improve adhesion. The putty may now be applied and will set hard in three to four hours without shrinking.
>>> To truly smooth out your Milliput, apply Methylated Spirits with an old brush, the putty can also be thinned to a paint like consistency in this way for use filling or covering very light cracks. <<<
Milliput - Superfine White - 113g Stick
£5.48 GBP
Milliput Superfine White - 113g Stick - G-MP803
This Superfine White epoxy putty is at first soft and highly adhesive and then gradually hardens. The speed of hardening depends on temperature and at normal temperatures (20-25°C) Milliput becomes rock hard in three to four hours. With the application of heat the setting time can be reduced. After setting hard Milliput continues to cure and is fully cured after an elapse of time equal to the setting time at the same temperature. Once fully cured Milliput can be tapped, filed and painted. Milliput will set under water and is heat resistant up to 130°C.
Mix together equal parts of each stick from the pack. Knead and roll in the hands for at least 5 minutes until the colours merge and become uniform and no streaks can be seen, and then mix for another minute. The surfaces to which the putty is applied should be free from grease and dirt. Smooth surfaces should be cleaned with a suitable solvent or with soap and warm water to remove dirt and grease. Abrading the surface will improve adhesion. The putty may now be applied and will set hard in three to four hours without shrinking.
Milliput - Silver Grey - 113g Stick
£5.48 GBP
Milliput Silver Grey - 113g Stick - G-MP802
This Silver Grey epoxy putty is at first soft and highly adhesive and then gradually hardens. The speed of hardening depends on temperature and at normal temperatures (20-25°C) Milliput becomes rock hard in three to four hours. With the application of heat the setting time can be reduced. After setting hard Milliput continues to cure and is fully cured after an elapse of time equal to the setting time at the same temperature. Once fully cured Milliput can be tapped, filed and painted. Milliput will set under water and is heat resistant up to 130°C.
Mix together equal parts of each stick from the pack. Knead and roll in the hands for at least 5 minutes until the colours merge and become uniform and no streaks can be seen, and then mix for another minute. The surfaces to which the putty is applied should be free from grease and dirt. Smooth surfaces should be cleaned with a suitable solvent or with soap and warm water to remove dirt and grease. Abrading the surface will improve adhesion. The putty may now be applied and will set hard in three to four hours without shrinking.
Revell Glues - Plasto Body Putty
£4.00 GBP
Revell Glues - Plasto Body Putty - RV39607
Modelling mistakes, joins and cracks can be touched up and concealed using Revel Plasto putty. Once dry, the surface needs to be smoothed down.
Revell Glues - Contacta Professional 25g Needle
Sold Out
Revell Glues - Contacta Professional 25g Needle - RV39604
Revell Contacta Professional is designed for pin-point accurate bonding. The extra-fine hollow needle allows for micro-fine glueing of tiny details and clear part edges.
Vallejo Acrylics - Airbrush Cleaning Pot
£12.00 GBP
Vallejo Acrylics - Airbrush Cleaning Pot
Airbrush cleaning pot, glass with plastic lid, used to spray-clean airbrush. The airbrush is inserted into the opening of the plastic lid and is cleaned by spraying Vallejo Airbrush Cleaner VAL099, VAL199 or water into the container.
Tamiya 1:35 - WWII German Soldiers Special Collection No.2
Sold Out
Tamiya 1:35 - WWII German Soldiers Special Collection No.2 - Plastic Figure Model Set #89781
This is a special packaging of thirteen of Tamiya's popular figure sets.
Includes:
TAM35038 German Machine Gun Troops
TAM35061 German Panzer Grenadiers
TAM35180 German Tank Engine Maintenance Crew Set
TAM35053 Wehrmacht Mounted Infantry Set
TAM35074 Tent Set
TAM35111 German Infantry Weapons Set
TAM35193 German Infantry Mortar Team
TAM35201 German Tank Crew At Rest
TAM35253 German Panzer Division "Frontline Reconnaissance Team"
TAM35035 German 37mm Anti-Tank Gun PAK 35/36
TAM35247 German Field Kitchen Scenery
Operation "Barbarossa", June 22, 1941 (ICM figure parts)
German Patrol (1939-1942) (ICM figure parts)
Tamiya 1:35 - T26E4 Super Pershing
Sold Out
Tamiya 1:35 - U.S. Tank T26E4 Super Pershing - Plastic Model Set #35319
The M26 Pershing was the first American tank capable of taking on the German Army's Tiger I and Panther tanks. The tank was introduced during the final stages of the Second World War. The T26E4 was a development of the M26 armed with a more powerful, long-barreled 90mm main gun. This gun was superior to the one found on the King Tiger heavy tank and could penetrate the Panther's frontal armour from long distances. The first T26E4 was sent to the European front in 1945. Subsequent models featured various improvements such as a modified gun mount.
- Model Dimensions: Length: 293mm, Width: 101mm
- Accurately reproduced turret with long-barreled 90mm gun and bustle counterweight;
- Parts for the larger gun travel lock included;
- Movable suspension enables many possibilities for dioramas;
- Accessories such as machine gun ammunition cases included;
- Comes with 3 infantry figures, 2 crew torso figures, and 1 marking option.
Tamiya 1:35 - DAK German Afrika Korps Limited Edition
Sold Out
Tamiya 1:35 - DAK German Afrika Korps Limited Edition - Plastic Figure Model Set #35037
This set includes eight German Africa Korps figures in various poses (marching x 2, running x 4, crouched x 2). Also includes numerous sidearms and accessories.
Tamiya 1:35 - German Afrika Korps Infantry
Sold Out
Tamiya 1:35 - German Afrika Korps Infantry - Plastic Figure Model Set #35314
This set contains 5 figures depicting infantrymen from Field Marshal Rommel's vaunted Afrika Korps, including an officer, an NCO, a rifleman in firing position, a machine gunner, and a loader. Each can be assembled in a realistic pose and all feature superb details such as open-collared jackets, goggles, and long canvas boots.
The Afrika Korps uniform was basically the same as the one for Europe, but featured open collars and a specific armband on the right sleeve. The Olive Green cotton shirt and trousers faded into various shades in the desert sun. Leather was not suited for the dry conditions, so canvas belts and boots were worn. This uniform was easy to produce and influenced the design of European Theater uniforms from mid-WWII onwards.
Miniart 1:35 British Officers
Sold Out
Miniart 1:35 - British Officers - Plastic Figure Model Kit #35165
The kit contains 52 parts.
Includes parts for the assembly of five figures.
Box: 260mm x 162mm x 35m
Miniart 1:35 Soviet Soldiers at Rest (Special Edition)
Sold Out
Miniart 1:35 - Soviet Soldiers at Rest (Special Edition) - Plastic Figure Model Kit #35109
The kit contains 134 parts.
Includes parts for five figures, weapons and equipment.
Box: 260mm x 162mm x 35m
Master Box 1:35 - Modern UK Infantrymen, Present day
£13.00 GBP
Master Box 1:35 Modern UK Infantrymen, Present day - Plastic Figure Model Kit #35180
Includes parts for the assembly of five figures. Glue and paint are not included.
Master Box 1:35 - Rommel and German Tank Crew, DAK
£14.50 GBP
Master Box 1:35 Rommel and German Tank Crew, DAK WWII era - Plastic Figure Model Kit #3561
Includes parts for the assembly of six figures including Field Marshall (Generalfeldmarschall) Johannes Erwin Eugen Rommel, also known as the 'Desert Fox' by the Allies. Rommel commended the: 7th Panzer Division, Afrika Korps, Panzer Army Africa, Army Group Africa, Army Group B.
Glue and paint are not included.
Miniart 1:35 Budapest 1945 Diorama (SU-76, Building & Figures)
Sold Out
Miniart 1:35 - Budapest 1945 Diorama (SU-76, Building & Figures) - Plastic model kit #36007
The kit contains 816 parts.
Model Dimension: Length 290mm, Width 215mm
Box: 380mm x 280mm x 110mm
Vallejo Model Air Set - Old & New Wood Effects
£19.00 GBP
Vallejo Model Air Set - Old & New Wood Effects, set #71187
Includes: 8 x 17ml paints
This set contains 8 acrylic colours and step by step instructions designed to help the modeler create various wood effects. The wood colours can be used for fences, boxes, crates, tool handles, etc. The old wood colours will help replicate much older and more weathered wood.
VAL 70.517 Dark Grey
VAL 70.614 IDF Israeli Sand
VAL 71.027 Light Brown
VAL 71.032 Golden Yellow
VAL 71.075 Sand (Ivory)
VAL 71.077 Wood
VAL 71.131 Concrete
VAL 71.141 IDF Sand Gray 73
AK Interactive - The Caunter Scheme - Africa and Mediterranean
£19.00 GBP
The Caunter Scheme 1940-1941 is a set of six acrylic paints essential for painting British vehicles used in the African and Mediterranean campaigns of that period. These acrylic paints are suitable for both brush and airbrush use, and they are soluble in water, meaning that you will not have odours as you would experience with the more aggressive, solvent-based paints. The new formula of AK-Interactive acrylics prevents problems with paints drying in the airbrush and causing potential blockages. A profile guide is printed on the backside of the box.
Includes: AK4031 BSC. Nº 64 Portland Stone, AK4032 BSC. Nº 28 Silver grey, AK4033 BSC. Nº 34 Slate, AK4034 BSC. Nº 61 Light stone, AK4035 Khaki green Nº3 (New sevice colour), AK4036 BSC. Nº 49 Purple Brown
AK Interactive - Tank Accesories
£19.00 GBP
Tank Accessories is a set of six new acrylic paints which includes all the colours you need to paint equipment, ammunition and other accessories carried by combat vehicles. These acrylic paints are suitable for both brush and airbrush use, and they are soluble in water, meaning that you will not have odours as you would experience with the more aggressive, solvent-based paints. The new formula of AK-Interactive acrylics prevents problems with paints drying in the airbrush and causing potential blockages. It is recommended to use AK712 thinner for best results.
Includes: AK4002 Bullet Metal Case, AK4003 Matt Red, AK4004 Persicope Shade, AK4005 Exhausts Silencer, AK4006 Buff Light Shade, AK4007 Buff Dark Shade
AK Interactive - 35ml Engine Grime
£5.00 GBP
This product will help you to create a greyish, dark and matt look that you find on many engines that have been used for a long time. Apply it with a brush or an airbrush to obtain different results.
AK Interactive - 35ml Damp Earth
£5.00 GBP
This colour makes itself at home in southern Europe, although it can be used for other places around the world. When its dry this product has a satin effect which helps recreate wet or damp earth. It can be applied using washes over your model or mixed with plaster to give volume to mud effects.
35ml bottle.
AK Interactive - Africa Korps Wash 35ml
£5.00 GBP
A very appropriate colour for desert vehicles painted with a light sand colour, especially German tanks from DAK. Shake it well before use and then apply directly to your model to create contrast and depth in the details. This is an enamel product and it can be dissolved using AK Interactive white spirit or odourless turpentine. It is recommended to apply this wash to surfaces that have been painted or varnished with acrylic paint.
AK Interactive - Enamel Wash: Light Rust for Green Vehicles
£5.00 GBP
The range of AK Interactive washes is designed for creating rust on vehicles and accessories. This product has a light rusty colour, which really stands out on dark greens giving your models a great realistic matt finish. It is perfect for amphibious vehicles or other vehicles in wet environments. Also great for creating rust effects on abandoned vehicles.
Includes: 1 x 35ml bottle
AK Interactive - Enamel Wash: Dark Brown for Green Vehicles
Sold Out
Washes are very thin paint mixes intended to bring out the details on our models. This wash is a perfect solution designed for vehicles painted in greens. It will help you save the time you spend on making your own wash.
Includes: 1 x 35ml bottle
Vallejo Model Air - Airbrush Flow Improver 17ml
£2.50 GBP
Vallejo Model Air - Airbrush Flow Improver
This product is designed to improve the flow and delay the drying of paint on the needle while airbrushing. It is recommended to add 1-2 drops of Flow Improver to 10 drops of paint in the cup of the airbrush.
Includes: 1 x 17 ml bottle
VAL 71.262 Airbrush Flow Improver
AK Interactive - 35ml Slimy Grime light
£5.00 GBP
This new product allows you to create slimy grime effects, caused by water and humidity, on ships, boats, wooden doors and amphibious vehicles. It is recommended to use real pictures as reference for your models. This product is enamel and it can be mixed with other AK Interactive colours.
AK Interactive - 35ml Slimy Grime dark
£5.00 GBP
This new product allows you to create slimy grime effects, caused by water and humidity, on ships, boats, wooden doors and amphibious vehicles. It is recommended to use real pictures as reference for your models. This product is enamel and it can be mixed with other AK Interactive colours.
AK Interactive - 35ml Fuel Stains
£5.00 GBP
This product is designed for creating realistic effects of spilled fuel on any type of modern or classic vehicle. Note that it is not suitable for making oil and grease effects. This product is enamel and it can be mixed with other AK Interactive colours.
AK Interactive - 35ml Dark Mud
£5.00 GBP
This is an enamel product designed for recreating natural dark mud. You can mix this product with plaster to achieve ultra realistic results or apply it directly to your vehicle wheels, tracks and hull. The product can be mixed with other AK Interactive colours.
AK Interactive - 35ml Earth Effects
£5.00 GBP
An enamel product to create natural earth and mud effects. Apply it to your vehicle wheels, tracks and hull to achieve ultra realistic earth effects. You can mix this product with plaster to add volume. This product can also be mixed with other AK Interactive earth colours which gives a modeller unlimited possibilities for creating nature effects.
AK Interactive - 35ml Fresh Mud
£5.00 GBP
An enamel product to replicate natural fresh mud. Apply it to your vehicle wheels, tracks and hull to achieve the most realistic effect. You can also mix it with plaster to give the mud volume.
AK Interactive - 35ml Dust Effects
£5.00 GBP
This is an enamel product to recreate natural dust effects. Simply apply it to your vehicle wheels, tracks and hull to achieve the most realistic effect possible. You can also mix this product with plaster if you want to give your dust volume.
Miniart 1:35 SU-122 (Initial Production) With Full Interior
£50.00 GBP
Miniart 1:35 - SU-122 (Initial Production) With Full Interior - Plastic Model Kit #35175
The SU-122 was a Soviet WWII self-propelled howitzer or assault gun with a 122mm M-30S howitzer as its main armament. The production of the SU-122 started in 1942 with 27 vehicles built during the first month. By 1944, the Soviet Union produced over a thousand SU-122's. After 1944 the SU-122 was replaced by the SU-152, ISU-122 and ISU-152 heavy SPGs and SU-85 tank destroyers.
The kit contains 828 parts for the Soviet SPG SU-122.
Miniart 1:35 German Tank Crew At Rest
£11.00 GBP
Miniart 1:35 - German Tank Crew At Rest - Plastic Figure Model Kit #35198
The kit contains 58 parts.
Box: 260 x 162 x 35mm
Includes parts for five figures and a pig. Paint and glue are not included.
AK Interactive (Meng) - Perfect Cleaner 100ml
Sold Out
This special non-toxic water based thinner is designed for use with Meng acrylics. It is also compatible with paints from Vallejo, Tamiya, Lifecolor and AK Interactive. This product is ideal for creating perfect paint consistency for brush and airbrush.
Includes:
1 x 100ml cleaner
AK Interactive - Russian WWII Standard Colour Combo Set
£8.00 GBP
This combo pack contains three acrylics designed for painting most of the Soviet tanks of World War II. These are the three basic colours suitable for painting vehicles from T-34 to SU-100. AK Interactive paints have been developed under a very strict quality test to achieve the most precise colour, high resistance and ease of use.
Includes:
AK746 4BO Russian Green
AK747 6K Russian Brown
AK748 7K Russian Tan
AK Interactive - Moss Deposit
£5.00 GBP
This moss deposit mixed with other products will help you reproduce ultra-realistic moss, lichen, and other plants by creating texture.
AK Interactive - True Metal Paints
£6.00 GBP
These wax based metallic paints are created from high quality pigments, to help you achieve extremely realistic effects on your models. They can be applied with a brush, a fingertip, a cotton swab or even an airbrush when diluted with thinner first. Once the paint is dry, it can be polished to achieve a metallic finish. Recommended to prime first.
Variants:
AK451 Metalic Blue
AK452 Metalic Purple
AK453 Old Bronze
AK454 Copper
AK455 Aluminium
AK456 Dark Aluminium
AK457 Steel
AK458 Silver
AK459 Iron
AK460 Brass
AK461 Gun Metal
Academy 1:35 M1025 Hummer A.A.C. (Replaces ACA01350)
Sold Out
Academy 1:35 - M1025 Hummer A.A.C. (Replaces ACA01350) - Plastic model kit #13241
The American Motors Hummer entered military service in 1983, and today it represents the power and mobility of the modern U.S. Armed Forces. Its official designation is High Mobility Multipurpose Wheeled Vehicle (HMMWV). Hummer is very versatile and performs a wide range of tasks, from carrying troops to serving as a heavily armed TOW missile transport.
HobbyBoss 1:35 AAV-P7A1 Assault Amphibious Vehicle (w/ Mounting Bosses)
Sold Out
The U.S. Assault Amphibious Vehicle (AAV, or AAV-P7/A1) is the current amphibious troop transport used by the U.S. Marine Corps Assault Amphibian Battalions. It is a fully tracked amphibious landing vehicle equipped with an MK19 40mm grenade launcher and an M2 HB CAL 50 machine gun.
Item No: 82413
Item Name: AAV-P7A1 w/mounting bosses
Item Type: Static kit
Model Dimensions: Length 233mm, Width 94.2mm, Height 93mm
Total Plastic Parts: 803 pcs
Total Sprues: 20 sprues, lower hull, upper hull, 192 track links
Chromeplate Parts: n/a
Camouflage Scheme: United States Marine Corps Assault Amphibian Battalions
Resin Parts: n/a
Metal Parts: n/a
Photo Etched Parts: two frets
Film Accessory: n/a
Release Date: 2008-10
Additional:
- Fully detailed interior
- Multi-directional slide moulded lower hull
- The entry door can be fixed in an open or closed position
HobbyBoss 1:35 RSOV w/MG (Ranger Special Operations Vehicle)
£27.00 GBP
The Ranger Special Operations Vehicle (RSOV) is a light military vehicle used by the U.S. Army's 75th Ranger Regiment. The U.S. Army adopted the RSOV in 1992 in order to replace the M151. For a typical operation the RSOV is equipped with various machine guns.
Item No: 82450
Item Name: (Ranger Special Operations Vehicle) RSOV w/MG
Scale: 1:35
Item Type: Static kit
Model Dimensions: Length 134.6mm Width 55.4mm
Total Plastic Parts: 190+
Total Sprues: 9 sprues and tires
Photo Etched Parts: 1 piece
Release Date: 2012-06
Additional:
- The kit consists of over 190 parts
- Detailed engine with accurate design
- Rubber tires with very good detail
Master Box 1:35 - No Soldier left behind - MWD Down
£13.00 GBP
Master Box 1:35 - No Soldier left behind - MWD Down - Plastic Figure Model Kit #35181
Dogs have been used in warfare since ancient times. Their military roles are different, from fighting and tracking to carrying messages in battle. Some countries continue to use dogs for military purposes, and the United States is one of them. Thousands of dogs serve in the modern U.S. Army. Dogs are trained to save soldiers lives whatever it may take.
This kit represents the moment when one of the soldiers helps a wounded dog, and the rest of the group cover them.
The kit includes parts for the assembly of four figures of soldiers and one dog. Glue and paints are not included.
Academy 1:35 Tiger I Gruppe Fehrmann April 1945
Sold Out
Academy 1:35 - Tiger I Gruppe Fehrmann April 1945 - Plastic model kit #13299
The Tiger I, a German heavy tank of the Second World War, was deployed from 1942 in Africa and Europe commonly in independent heavy tank battalions. The Tiger I gave the Wehrmacht its first armoured fighting vehicle that used the KwK 36 88-mm gun. In total 1,347 were built between August 1942 and August 1944.
The Gruppe Fehrmann was formed at the beginning of 1945 with the intention of going into the Ruhr area. It included six Tiger I and five Panther tanks. The Tiger tanks were commanded by Oberleutnant Ferhmann and were designated with 'F' to denote their 'Gruppe' commander.
Academy 1:35 German King Tiger (Late Production)
Sold Out
Academy 1:35 - German King Tiger (Late Production) - Plastic model kit #13229
The King Tiger was the informal name used by Allied soldiers for the German Tiger II tank. The official German designation of the tank was Panzerkampfwagen Tiger Ausf. B. The Tiger II combined the thick armour of Tiger I and the armour sloping of the Panther medium tank. It was a heavy tank and weighed almost 70 tonnes. The Tiger II was armed with 8.8 cm KwK 43 L/71 anti-tank cannon. It was first used during the Normandy campaign in 1944.
© 2024 Panzer Models. Prepared by Article.
