Diorama building kit #1
00045
Sold Out
Starter set for creating a diorama base, includes:
1x Mod Podge - BS Mod Podge Matte 8 Oz. / 236ml1 x 130g Bag of Amaco Plaster Sculptamold Modelling Compound White
1 x Blue Styrofoam Sheet (20mm thick, A4 sized)
1 x Milliput Modelling Clay - Standard
Mod Podge - BS Mod Podge Matte 8 Oz. / 236ml
Suitable for paper craft projects
Is quick-drying for multiple coats build up and dries clear
Can be sanded to a smooth finish
Cleans up easily while wet with soap and water
Non-toxic and water-based
130g Bag of Amaco Plaster Sculptamold Modelling Compound White
Non-toxic and acid free
Made in USA
Designed for easy usage and storage
A modelling and casting compound for all ages. Finished objects are lightweight and extremely durable. This compound mixes easily and quickly with water and models like clay but sets like plaster in 30 minutes. It adheres to most clean surfaces and can be oven dried at 200 degrees. When dry Sculptamold can be sanded sawed carved or nailed without chipping.
Blue Styrofoam Sheet (20mm, A4 Sized)
Ideal for diorama bases, can be glued, cut or shaped with heat. High density modelling foam.
Milliput Modelling Clay - Standard (Yellow/Grey)
Comes in packs containing 2 x 56·7gm. Sticks and the general instructions for preparation and usage are the same.
The two sticks have a long shelf life but once mixed the resultant putty is at first soft and highly adhesive and then gradually hardens. Speed of hardening is dependant on temperature and at normal temperatures (20-25ºC) Milliput becomes rock hard in three to four hours. By the application of heat the setting time can be reduced to a few minutes.
After setting hard Milliput continues to cure and is fully cured after an elapse of time equal to the setting time at the same temperature. Once fully cured Milliput can be machined, drilled, tapped, turned, filed, sawn, sandpapered and painted. Milliput can be sandpapered and painted immediately it has set. (it is advisable to wear eye protection during this process).
Milliput is an excellent adhesive and will bond any of the following to itself or to any of the others - wood, brick, cement, metals, concrete, plastics, glass etc, but note that Milliput is not intended as a thin layer adhesive and should not be used where a paste, mucilage or thin glue is indicated. Milliput will set under water and is heat resistant up to 130°C.
Related Items
1:35 Resin Figure - USMC Scout Sniper (Vietnam)
£20.00 GBP
Pre-order, coming very soon!
1:35 Resin Figure - USMC Scout Sniper (Vietnam)
US Marine Corps infantrymen and reconnaissance Marines graduated from the US Marine Corps Scout Sniper School are known as Scout Snipers. In order to get this designation, the snipers must be conferred the rank of Lance Corporal, be selected to enter the scout-sniper platoon, and finish a special training course.
The main skills of a USMC Scout Sniper include fieldcraft, marksmanship and map-reading. The primary battlefield role of the sniper is to support the infantry battalion by executing aimed fire on selected targets as well as to perform reconnaissance and surveillance tasks.
The kit is based on a photo of Lance Corporal Dalton Gunderson 3rd Marine Division scanning the area for VC snipers with a Winchester Model 70 during Operation Virginia in 1966. This picture is often misattributed as being Carlos Hathcock, a legendary sniper of the US Marine Corps. During the Vietnam War, Hathcock killed at least 93 Vietnamese soldiers. At that time an officer had to witness the kills to confirm them. That made the confirmation difficult as officers could not be present every time a sniper shot the enemy. Hathcock asserted that he had killed over 300 men in Vietnam. Further details on the original photograph: “I was a young scout sniper when I met Dalton. He was a humble professional as you would imagine. I have this picture framed and he said ‘hey that’s me’ and laughed. I asked him what the story was behind it and he said that everytime they left the wire there was a dog that would compromise them and alert the enemy that there was a patrol leaving. He was aggravated and finally decided to deal with it, when a reporter asked him to take the picture.”
The kit includes one unpainted resin figure of an American USMC sniper and a Winchester Model 70 sporting rifle (unofficially issued in Vietnam and used by Hathcock and others during his first tour).
Soviet Sniper WW2 1/16th scale
£45.00 GBP
Highly detailed 1/16th or 120mm scale miniature, capturing the uniform and equipment of a WW2 Soviet Sniper. The kit comes with three head configuration options, fur hat with ear flaps known as the 'Ushanka', a head with helmet (2 parts) and a head with a cap known as the 'Pilotka'.
This is ideal for a diorama or bust depicting Soviet Snipers such as Vasily Grigoryevich Zaitsev. Between 10 October 1942 and 17 December 1942, during the Battle of Stalingrad, he killed 225 enemy soldiers. Zaitsev became a celebrated figure during the war and later a Hero of the Soviet Union, and he remains lauded for his skills as a sniper.
Operation Frankton RMBPD Set - WWII Cockle Canoe + Royal Marines
£45.00 GBP
1:35 - Major Herbert George "Blondie" Hasler - Resin kit
Herbert George "Blondie" Hasler was a Lieutenant Colonel of the Royal Marines. In 1942, a 28-year-old Hasler planned and led Operation Frankton. The operation was a commando raid on Axis shipping in the French port of Bordeaux occupied by the Germans. The mission was to attach mines to the hulls of German cargo ships. Three of the five canoes were lost on the way to the port. The surviving crewmen including Hasler reached the port successfully, placed the mines and managed to drown four cargo ships. They then walked 100 miles to a French village where they met with members of the Resistance and started their journey back to England through Spain and Gibraltar. For this operation Hasler was awarded the Distinguished Service Order by King George VI.
One kayak was damaged while being deployed from the submarine, and it and its crew therefore could not take part in the mission. Only two of the 10 men who launched from the submarine survived the raid: Hasler, and his number two in the kayak, Bill Sparks. Of the other eight, six were executed by the Germans and two died from hypothermia.
This product is available in two scales, 1:35 and 1:24 and was painstakingly designed from scratch as a digital model.
The kit includes: 2 x miniatures (Blondie Hasler and Bill Sparks) in their folding Cockle Canoe named 'Catfish' made by Campaign Models (UK).
Now available, while stocks last.
Miniature Diorama Display Base
£9.50 GBP
This highly detailed Diorama base is ideal for mounting one or two figures on display. Small enough to be displayed easily, big enough to provide enough space to set the scene. More styles coming very soon!
Dimensions: 58mm x 58mm x 4mm
© 2025 Panzer Models. Prepared by Article.
